Using commercially available cost-effective Zn(II) phthalocyanine as hole-transporting material for inverted type perovskite solar cells and investigation of dopant effect

Zeynep Dalkiliç; Ayfer Kalkan Burat

doi:10.1016/j.synthmet.2021.116961

Using commercially available cost-effective Zn(II) phthalocyanine as hole-transporting material for inverted type perovskite solar cells and investigation of dopant effect

Zeynep Dalkiliç, Ayfer Kalkan Burat^*

^*Bu çalışma için yazışmadan sorumlu yazar

Kimya Bölümü

Istanbul Technical University

Araştırma sonucu: Dergiye katkı › Makale › bilirkişi

1 Atıf (Scopus)

Özet

Commercially available, low-cost, and stable unsubstituted zinc phthalocyanine (ZnPc) was introduced as both dopant-free and doped hole-transporting material (HTM) in inverted type (p-i-n) perovskite solar cells (PSCs). A simple solution process was applied to the fabrication of PCSs with a device structure of ITO/HTM/CH₃NH₃Pbl₃/PCBM/Al, in which ZnPc and poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) were used as HTM, methylammonium lead iodide (MAPbI₃) as an active layer, [6,6]-phenyl-C61-butyric acid methyl ester (PC₆₁BM) as the electron transport material (ETM), and aluminum as the counter electrode. PEDOT:PSS based cell was used as a reference and a power conversion efficiency (PCE) of 14.3% was achieved. A PCE of 4.4% was achieved for dopant-free ZnPc and 7.7% for doped-ZnPc. Although lower efficiency than the reference was obtained for ZnPc-based cells, we observed that the stability of inverted cells drastically improved when ZnPcs were used as HTM instead of PEDOT-PSS.

Orijinal dil	İngilizce
Makale numarası	116961
Dergi	Synthetic Metals
Hacim	282
DOI'lar	https://doi.org/10.1016/j.synthmet.2021.116961
Yayın durumu	Yayınlandı - Ara 2021

Bibliyografik not

Publisher Copyright:
© 2021 Elsevier B.V.

Finansman

This work was supported by the Research Fund of the Technical University of Istanbul (ID: 41357 , Project code: TDK-2018–41357 ). Thanks to the Scientific and Technological Research Council of Turkey (TUBITAK) (International Doctoral Research Fellowship Programme- 1059B141800004 ). Special thanks to Hyosung Choi from Hanyang University . This work was supported by the Research Fund of the Technical University of Istanbul (ID: 41357, Project code: TDK-2018?41357). Thanks to the Scientific and Technological Research Council of Turkey (TUBITAK) (International Doctoral Research Fellowship Programme-1059B141800004). Special thanks to Hyosung Choi from Hanyang University.

Finansörler	Finansör numarası
TUBITAK	1059B141800004
Hanyang University
Türkiye Bilimsel ve Teknolojik Araştirma Kurumu
Istanbul Teknik Üniversitesi	TDK-2018–41357, 41357

BM SKH

Bu sonuç, aşağıdaki Sürdürülebilir Kalkınma Hedefine/Hedeflerine katkıda bulunur

Belgeye Erişim

10.1016/j.synthmet.2021.116961

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

@article{483d6634632b48528845dc1363794091,

title = "Using commercially available cost-effective Zn(II) phthalocyanine as hole-transporting material for inverted type perovskite solar cells and investigation of dopant effect",

abstract = "Commercially available, low-cost, and stable unsubstituted zinc phthalocyanine (ZnPc) was introduced as both dopant-free and doped hole-transporting material (HTM) in inverted type (p-i-n) perovskite solar cells (PSCs). A simple solution process was applied to the fabrication of PCSs with a device structure of ITO/HTM/CH3NH3Pbl3/PCBM/Al, in which ZnPc and poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) were used as HTM, methylammonium lead iodide (MAPbI3) as an active layer, [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) as the electron transport material (ETM), and aluminum as the counter electrode. PEDOT:PSS based cell was used as a reference and a power conversion efficiency (PCE) of 14.3% was achieved. A PCE of 4.4% was achieved for dopant-free ZnPc and 7.7% for doped-ZnPc. Although lower efficiency than the reference was obtained for ZnPc-based cells, we observed that the stability of inverted cells drastically improved when ZnPcs were used as HTM instead of PEDOT-PSS.",

keywords = "Hole transporting material, Inverted solar cell, Perovskite, Zinc phthalocyanine",

author = "Zeynep Dalkili{\c c} and Burat, {Ayfer Kalkan}",

note = "Publisher Copyright: {\textcopyright} 2021 Elsevier B.V.",

year = "2021",

month = dec,

doi = "10.1016/j.synthmet.2021.116961",

language = "English",

volume = "282",

journal = "Synthetic Metals",

issn = "0379-6779",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - Using commercially available cost-effective Zn(II) phthalocyanine as hole-transporting material for inverted type perovskite solar cells and investigation of dopant effect

AU - Dalkiliç, Zeynep

AU - Burat, Ayfer Kalkan

PY - 2021/12

Y1 - 2021/12

N2 - Commercially available, low-cost, and stable unsubstituted zinc phthalocyanine (ZnPc) was introduced as both dopant-free and doped hole-transporting material (HTM) in inverted type (p-i-n) perovskite solar cells (PSCs). A simple solution process was applied to the fabrication of PCSs with a device structure of ITO/HTM/CH3NH3Pbl3/PCBM/Al, in which ZnPc and poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) were used as HTM, methylammonium lead iodide (MAPbI3) as an active layer, [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) as the electron transport material (ETM), and aluminum as the counter electrode. PEDOT:PSS based cell was used as a reference and a power conversion efficiency (PCE) of 14.3% was achieved. A PCE of 4.4% was achieved for dopant-free ZnPc and 7.7% for doped-ZnPc. Although lower efficiency than the reference was obtained for ZnPc-based cells, we observed that the stability of inverted cells drastically improved when ZnPcs were used as HTM instead of PEDOT-PSS.

AB - Commercially available, low-cost, and stable unsubstituted zinc phthalocyanine (ZnPc) was introduced as both dopant-free and doped hole-transporting material (HTM) in inverted type (p-i-n) perovskite solar cells (PSCs). A simple solution process was applied to the fabrication of PCSs with a device structure of ITO/HTM/CH3NH3Pbl3/PCBM/Al, in which ZnPc and poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) were used as HTM, methylammonium lead iodide (MAPbI3) as an active layer, [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) as the electron transport material (ETM), and aluminum as the counter electrode. PEDOT:PSS based cell was used as a reference and a power conversion efficiency (PCE) of 14.3% was achieved. A PCE of 4.4% was achieved for dopant-free ZnPc and 7.7% for doped-ZnPc. Although lower efficiency than the reference was obtained for ZnPc-based cells, we observed that the stability of inverted cells drastically improved when ZnPcs were used as HTM instead of PEDOT-PSS.

KW - Hole transporting material

KW - Inverted solar cell

KW - Perovskite

KW - Zinc phthalocyanine

UR - http://www.scopus.com/inward/record.url?scp=85118477250&partnerID=8YFLogxK

U2 - 10.1016/j.synthmet.2021.116961

DO - 10.1016/j.synthmet.2021.116961

M3 - Article

AN - SCOPUS:85118477250

SN - 0379-6779

VL - 282

JO - Synthetic Metals

JF - Synthetic Metals

M1 - 116961

ER -

Using commercially available cost-effective Zn(II) phthalocyanine as hole-transporting material for inverted type perovskite solar cells and investigation of dopant effect

Özet

Bibliyografik not

Finansman

BM SKH

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap