Usage of Industry 4.0 Technologies Among ISO 500 Manufacturing Firms in Turkey

Alper Kaan Erkut; Seçkin Polat; Umut Asan

doi:10.1007/978-3-030-31343-2_30

Usage of Industry 4.0 Technologies Among ISO 500 Manufacturing Firms in Turkey

Alper Kaan Erkut^*, Seçkin Polat, Umut Asan

^*Bu çalışma için yazışmadan sorumlu yazar

Endüstri Mühendisliği Bölümü

Humboldt University of Berlin

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

Özet

This paper presents the results of a research on the usage of Industry 4.0 (I4.0) technologies among ISO 500 manufacturing firms in Turkey and the factors affecting the usage rate. For this purpose, secondary data has been collected and examined. News, reports and other relevant information obtained from the internet about the I4.0 technologies used by ISO 500 manufacturing firms were used in the research. The descriptive results indicate that the usage rates of the I4.0 technologies vary among the ISO 500 manufacturing firms. A difference in usage is also observed across the categories of firms. I4.0 technologies are mostly used in discrete manufacturing firms. According to the results of the regression analysis, the rate of usage is most affected by the type of manufacturing technology and the number of employees. Finally, the usage rates were compared with the ones of the study carried out by Boston Consulting Group (BCG) for TUSIAD (Turkish Industry and Business Association).

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	Proceedings of the International Symposium for Production Research 2019
Editörler	Muhammed Nafis Osman Zahid, Radhiyah Abd. Aziz, Ahmad Razlan Yusoff, Nafrizuan Mat Yahya, Fazilah Abdul Aziz, Mohd Yazid Abu, Numan M. Durakbasa, M. Günes Gençyilmaz
Yayınlayan	Springer Science and Business Media Deutschland GmbH
Sayfalar	335-347
Sayfa sayısı	13
ISBN (Basılı)	9783030313425, 9789811509490
DOI'lar	https://doi.org/10.1007/978-3-030-31343-2_30
Yayın durumu	Yayınlandı - 2020
Etkinlik	19th International Symposium for Production Research, ISPR 2019 - Vienna, Austria Süre: 28 Ağu 2019 → 30 Ağu 2019

Yayın serisi

Adı	Lecture Notes in Mechanical Engineering
ISSN (Basılı)	2195-4356
ISSN (Elektronik)	2195-4364

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	19th International Symposium for Production Research, ISPR 2019
Ülke/Bölge	Austria
Şehir	Vienna
Periyot	28/08/19 → 30/08/19

Bibliyografik not

Publisher Copyright:
© 2020, Springer Nature Switzerland AG.

BM SKH

Bu sonuç, aşağıdaki Sürdürülebilir Kalkınma Hedefine/Hedeflerine katkıda bulunur

Belgeye Erişim

10.1007/978-3-030-31343-2_30

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Erkut, A. K., Polat, S., & Asan, U. (2020). Usage of Industry 4.0 Technologies Among ISO 500 Manufacturing Firms in Turkey. In M. N. Osman Zahid, R. Abd. Aziz, A. R. Yusoff, N. Mat Yahya, F. Abdul Aziz, M. Yazid Abu, N. M. Durakbasa, & M. G. Gençyilmaz (Eds.), Proceedings of the International Symposium for Production Research 2019 (pp. 335-347). (Lecture Notes in Mechanical Engineering). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-3-030-31343-2_30

Erkut, Alper Kaan ; Polat, Seçkin ; Asan, Umut. / Usage of Industry 4.0 Technologies Among ISO 500 Manufacturing Firms in Turkey. Proceedings of the International Symposium for Production Research 2019. editör / Muhammed Nafis Osman Zahid ; Radhiyah Abd. Aziz ; Ahmad Razlan Yusoff ; Nafrizuan Mat Yahya ; Fazilah Abdul Aziz ; Mohd Yazid Abu ; Numan M. Durakbasa ; M. Günes Gençyilmaz. Springer Science and Business Media Deutschland GmbH, 2020. pp. 335-347 (Lecture Notes in Mechanical Engineering).

@inproceedings{4a1ae1ed73604f69a460ce8639ae786f,

title = "Usage of Industry 4.0 Technologies Among ISO 500 Manufacturing Firms in Turkey",

abstract = "This paper presents the results of a research on the usage of Industry 4.0 (I4.0) technologies among ISO 500 manufacturing firms in Turkey and the factors affecting the usage rate. For this purpose, secondary data has been collected and examined. News, reports and other relevant information obtained from the internet about the I4.0 technologies used by ISO 500 manufacturing firms were used in the research. The descriptive results indicate that the usage rates of the I4.0 technologies vary among the ISO 500 manufacturing firms. A difference in usage is also observed across the categories of firms. I4.0 technologies are mostly used in discrete manufacturing firms. According to the results of the regression analysis, the rate of usage is most affected by the type of manufacturing technology and the number of employees. Finally, the usage rates were compared with the ones of the study carried out by Boston Consulting Group (BCG) for TUSIAD (Turkish Industry and Business Association).",

keywords = "Industry 4.0, ISO 500 firms, Manufacturing firms, Regression analysis, Technologies of Industry 4.0",

author = "Erkut, {Alper Kaan} and Se{\c c}kin Polat and Umut Asan",

note = "Publisher Copyright: {\textcopyright} 2020, Springer Nature Switzerland AG.; 19th International Symposium for Production Research, ISPR 2019 ; Conference date: 28-08-2019 Through 30-08-2019",

year = "2020",

doi = "10.1007/978-3-030-31343-2_30",

language = "English",

isbn = "9783030313425",

series = "Lecture Notes in Mechanical Engineering",

publisher = "Springer Science and Business Media Deutschland GmbH",

pages = "335--347",

editor = "{Osman Zahid}, {Muhammed Nafis} and {Abd. Aziz}, Radhiyah and Yusoff, {Ahmad Razlan} and {Mat Yahya}, Nafrizuan and {Abdul Aziz}, Fazilah and {Yazid Abu}, Mohd and Durakbasa, {Numan M.} and Gen{\c c}yilmaz, {M. G{\"u}nes}",

booktitle = "Proceedings of the International Symposium for Production Research 2019",

address = "Germany",

}

Erkut, AK, Polat, S & Asan, U 2020, Usage of Industry 4.0 Technologies Among ISO 500 Manufacturing Firms in Turkey. in MN Osman Zahid, R Abd. Aziz, AR Yusoff, N Mat Yahya, F Abdul Aziz, M Yazid Abu, NM Durakbasa & MG Gençyilmaz (eds), Proceedings of the International Symposium for Production Research 2019. Lecture Notes in Mechanical Engineering, Springer Science and Business Media Deutschland GmbH, pp. 335-347, 19th International Symposium for Production Research, ISPR 2019, Vienna, Austria, 28/08/19. https://doi.org/10.1007/978-3-030-31343-2_30

Usage of Industry 4.0 Technologies Among ISO 500 Manufacturing Firms in Turkey. / Erkut, Alper Kaan; Polat, Seçkin ; Asan, Umut.
Proceedings of the International Symposium for Production Research 2019. ed. / Muhammed Nafis Osman Zahid; Radhiyah Abd. Aziz; Ahmad Razlan Yusoff; Nafrizuan Mat Yahya; Fazilah Abdul Aziz; Mohd Yazid Abu; Numan M. Durakbasa; M. Günes Gençyilmaz. Springer Science and Business Media Deutschland GmbH, 2020. p. 335-347 (Lecture Notes in Mechanical Engineering).

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

TY - GEN

T1 - Usage of Industry 4.0 Technologies Among ISO 500 Manufacturing Firms in Turkey

AU - Erkut, Alper Kaan

AU - Polat, Seçkin

AU - Asan, Umut

PY - 2020

Y1 - 2020

N2 - This paper presents the results of a research on the usage of Industry 4.0 (I4.0) technologies among ISO 500 manufacturing firms in Turkey and the factors affecting the usage rate. For this purpose, secondary data has been collected and examined. News, reports and other relevant information obtained from the internet about the I4.0 technologies used by ISO 500 manufacturing firms were used in the research. The descriptive results indicate that the usage rates of the I4.0 technologies vary among the ISO 500 manufacturing firms. A difference in usage is also observed across the categories of firms. I4.0 technologies are mostly used in discrete manufacturing firms. According to the results of the regression analysis, the rate of usage is most affected by the type of manufacturing technology and the number of employees. Finally, the usage rates were compared with the ones of the study carried out by Boston Consulting Group (BCG) for TUSIAD (Turkish Industry and Business Association).

AB - This paper presents the results of a research on the usage of Industry 4.0 (I4.0) technologies among ISO 500 manufacturing firms in Turkey and the factors affecting the usage rate. For this purpose, secondary data has been collected and examined. News, reports and other relevant information obtained from the internet about the I4.0 technologies used by ISO 500 manufacturing firms were used in the research. The descriptive results indicate that the usage rates of the I4.0 technologies vary among the ISO 500 manufacturing firms. A difference in usage is also observed across the categories of firms. I4.0 technologies are mostly used in discrete manufacturing firms. According to the results of the regression analysis, the rate of usage is most affected by the type of manufacturing technology and the number of employees. Finally, the usage rates were compared with the ones of the study carried out by Boston Consulting Group (BCG) for TUSIAD (Turkish Industry and Business Association).

KW - Industry 4.0

KW - ISO 500 firms

KW - Manufacturing firms

KW - Regression analysis

KW - Technologies of Industry 4.0

UR - http://www.scopus.com/inward/record.url?scp=85076206060&partnerID=8YFLogxK

U2 - 10.1007/978-3-030-31343-2_30

DO - 10.1007/978-3-030-31343-2_30

M3 - Conference contribution

AN - SCOPUS:85076206060

SN - 9783030313425

SN - 9789811509490

T3 - Lecture Notes in Mechanical Engineering

SP - 335

EP - 347

BT - Proceedings of the International Symposium for Production Research 2019

A2 - Osman Zahid, Muhammed Nafis

A2 - Abd. Aziz, Radhiyah

A2 - Yusoff, Ahmad Razlan

A2 - Mat Yahya, Nafrizuan

A2 - Abdul Aziz, Fazilah

A2 - Yazid Abu, Mohd

A2 - Durakbasa, Numan M.

A2 - Gençyilmaz, M. Günes

PB - Springer Science and Business Media Deutschland GmbH

T2 - 19th International Symposium for Production Research, ISPR 2019

Y2 - 28 August 2019 through 30 August 2019

ER -

Erkut AK, Polat S , Asan U. Usage of Industry 4.0 Technologies Among ISO 500 Manufacturing Firms in Turkey. In Osman Zahid MN, Abd. Aziz R, Yusoff AR, Mat Yahya N, Abdul Aziz F, Yazid Abu M, Durakbasa NM, Gençyilmaz MG, editörler, Proceedings of the International Symposium for Production Research 2019. Springer Science and Business Media Deutschland GmbH. 2020. p. 335-347. (Lecture Notes in Mechanical Engineering). doi: 10.1007/978-3-030-31343-2_30

Usage of Industry 4.0 Technologies Among ISO 500 Manufacturing Firms in Turkey

Özet

Yayın serisi

???event.eventtypes.event.conference???

Bibliyografik not

BM SKH

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap