Ana gezinime geç Aramaya geç Ana içeriğe geç

Upconversion pumping of a 2.3 µm Tm3+:KY3F10 laser with a 1064 nm ytterbium fiber laser

  • Yagız Morova
  • , Mauro Tonelli
  • , Valentin Petrov
  • , Alphan Sennaroglu*
  • *Bu çalışma için yazışmadan sorumlu yazar
  • Koc University
  • University of Pisa
  • Max-Born-Institute for Nonlinear Optics and Short Pulse Spectroscopy

Araştırma sonucu: Dergiye katkıMakalebilirkişi

35 Atıf (Scopus)

Özet

We report efficient lasing of the isotropic Tm3 +:KY3F10 crystal near 2.3 µm via upconversion pumping with a 1064 nm ytterbium fiber laser as the pump source. When pumped at 1064 nm, an x-cavity Tm3 +:KY3F10 laser operated at the free-running wavelength of 2344 nm. Lasing was obtained with output couplers having transmissions in the range of 1–3%, and as high as 124 mW of continuous-wave (cw) output power was generated with 604 mW of absorbed pump power by using the 3% output coupler. Broadly tunable cw lasing could be obtained in the 2268–2373 nm wavelength range. An analysis of the experimental power efficiency data shows that nearly all of the absorbed pump photons were converted to 2.3 µm laser output after accounting for the quantum defect of the laser transition and resonator losses. We expect that higher lasing efficiency should be possible by using longer crystals to increase the pump absorption.

Orijinal dilİngilizce
Sayfa (başlangıç-bitiş)931-934
Sayfa sayısı4
DergiOptics Letters
Hacim45
Basın numarası4
DOI'lar
Yayın durumuYayınlandı - 15 Şub 2020

Bibliyografik not

Publisher Copyright:
© 2020 Optical Society of America

Parmak izi

Upconversion pumping of a 2.3 µm Tm3+:KY3F10 laser with a 1064 nm ytterbium fiber laser' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

Alıntı Yap