Toughening mechanism in epoxy resin modified recycled rubber based composites reinforced with gamma-alumina, graphene and CNT

A. B. Irez; E. Bayraktar; I. Miskioglu

doi:10.1007/978-3-319-95510-0_4

Toughening mechanism in epoxy resin modified recycled rubber based composites reinforced with gamma-alumina, graphene and CNT

A. B. Irez
, E. Bayraktar^*
, I. Miskioglu

^*Bu çalışma için yazışmadan sorumlu yazar

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Bölüm › bilirkişi

3 Atıf (Scopus)

Özet

In this research, low cost devulcanized recycled rubber based composites were designed with fine gamma alumina (d < 5–10 μm) reinforcements containing minor reinforcements such as nano graphene platelets and Carbon Nano Tubes. After determination (in different wt% percentages) of the reinforcements with matrix, a special process was applied to complete successfully the manufacturing of the composites. After that, the relevant toughening mechanisms for the most suitable reinforcements were analyzed in detail for aeronautical engineering applications. For this purpose, certain mechanical and physical properties (ISO 13586:2000, K_Ic – Fracture toughness stress intensity factor and G_Ic- Critical energy release rate in mode I) have been determined by fracture toughness tests (static 3P bending test with single edge notch specimens, Charpy impact, etc.). Microstructural and fracture surfaces analysis have been carried out by means of Optical Microscopy (OM) and Scanning Electron Microscopy (SEM).

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	Conference Proceedings of the Society for Experimental Mechanics Series
Yayınlayan	Springer New York LLC
Sayfalar	31-39
Sayfa sayısı	9
DOI'lar	https://doi.org/10.1007/978-3-319-95510-0_4
Yayın durumu	Yayınlandı - 2019
Harici olarak yayınlandı	Evet

Yayın serisi

Adı	Conference Proceedings of the Society for Experimental Mechanics Series
ISSN (Basılı)	2191-5644
ISSN (Elektronik)	2191-5652

Bibliyografik not

Publisher Copyright:
© 2019, The Society for Experimental Mechanics, Inc.

BM SKH

Bu sonuç, aşağıdaki Sürdürülebilir Kalkınma Hedefine/Hedeflerine katkıda bulunur

SKH 7 Erişilebilir ve Temiz Enerji
SKH 9 Sanayi, Yenilikçilik ve Altyapı
SKH 12 Sorumlu Üretim ve Tüketim

Belgeye Erişim

10.1007/978-3-319-95510-0_4

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Irez, A. B., Bayraktar, E., & Miskioglu, I. (2019). Toughening mechanism in epoxy resin modified recycled rubber based composites reinforced with gamma-alumina, graphene and CNT. In Conference Proceedings of the Society for Experimental Mechanics Series (pp. 31-39). (Conference Proceedings of the Society for Experimental Mechanics Series). Springer New York LLC. https://doi.org/10.1007/978-3-319-95510-0_4

@inbook{038bc9e495844e399c0ab1ae983d8e63,

title = "Toughening mechanism in epoxy resin modified recycled rubber based composites reinforced with gamma-alumina, graphene and CNT",

abstract = "In this research, low cost devulcanized recycled rubber based composites were designed with fine gamma alumina (d < 5–10 μm) reinforcements containing minor reinforcements such as nano graphene platelets and Carbon Nano Tubes. After determination (in different wt\% percentages) of the reinforcements with matrix, a special process was applied to complete successfully the manufacturing of the composites. After that, the relevant toughening mechanisms for the most suitable reinforcements were analyzed in detail for aeronautical engineering applications. For this purpose, certain mechanical and physical properties (ISO 13586:2000, KIc – Fracture toughness stress intensity factor and GIc- Critical energy release rate in mode I) have been determined by fracture toughness tests (static 3P bending test with single edge notch specimens, Charpy impact, etc.). Microstructural and fracture surfaces analysis have been carried out by means of Optical Microscopy (OM) and Scanning Electron Microscopy (SEM).",

keywords = "Epoxy, Fracture toughness, Recycled rubber, SEM, Wear resistance",

author = "Irez, \{A. B.\} and E. Bayraktar and I. Miskioglu",

note = "Publisher Copyright: {\textcopyright} 2019, The Society for Experimental Mechanics, Inc.",

year = "2019",

doi = "10.1007/978-3-319-95510-0\_4",

language = "English",

series = "Conference Proceedings of the Society for Experimental Mechanics Series",

publisher = "Springer New York LLC",

pages = "31--39",

booktitle = "Conference Proceedings of the Society for Experimental Mechanics Series",

}

Irez, AB, Bayraktar, E & Miskioglu, I 2019, Toughening mechanism in epoxy resin modified recycled rubber based composites reinforced with gamma-alumina, graphene and CNT. in Conference Proceedings of the Society for Experimental Mechanics Series. Conference Proceedings of the Society for Experimental Mechanics Series, Springer New York LLC, pp. 31-39. https://doi.org/10.1007/978-3-319-95510-0_4

Toughening mechanism in epoxy resin modified recycled rubber based composites reinforced with gamma-alumina, graphene and CNT. / Irez, A. B.; Bayraktar, E.; Miskioglu, I.
Conference Proceedings of the Society for Experimental Mechanics Series. Springer New York LLC, 2019. p. 31-39 (Conference Proceedings of the Society for Experimental Mechanics Series).

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Bölüm › bilirkişi

TY - CHAP

T1 - Toughening mechanism in epoxy resin modified recycled rubber based composites reinforced with gamma-alumina, graphene and CNT

AU - Irez, A. B.

AU - Bayraktar, E.

AU - Miskioglu, I.

PY - 2019

Y1 - 2019

N2 - In this research, low cost devulcanized recycled rubber based composites were designed with fine gamma alumina (d < 5–10 μm) reinforcements containing minor reinforcements such as nano graphene platelets and Carbon Nano Tubes. After determination (in different wt% percentages) of the reinforcements with matrix, a special process was applied to complete successfully the manufacturing of the composites. After that, the relevant toughening mechanisms for the most suitable reinforcements were analyzed in detail for aeronautical engineering applications. For this purpose, certain mechanical and physical properties (ISO 13586:2000, KIc – Fracture toughness stress intensity factor and GIc- Critical energy release rate in mode I) have been determined by fracture toughness tests (static 3P bending test with single edge notch specimens, Charpy impact, etc.). Microstructural and fracture surfaces analysis have been carried out by means of Optical Microscopy (OM) and Scanning Electron Microscopy (SEM).

AB - In this research, low cost devulcanized recycled rubber based composites were designed with fine gamma alumina (d < 5–10 μm) reinforcements containing minor reinforcements such as nano graphene platelets and Carbon Nano Tubes. After determination (in different wt% percentages) of the reinforcements with matrix, a special process was applied to complete successfully the manufacturing of the composites. After that, the relevant toughening mechanisms for the most suitable reinforcements were analyzed in detail for aeronautical engineering applications. For this purpose, certain mechanical and physical properties (ISO 13586:2000, KIc – Fracture toughness stress intensity factor and GIc- Critical energy release rate in mode I) have been determined by fracture toughness tests (static 3P bending test with single edge notch specimens, Charpy impact, etc.). Microstructural and fracture surfaces analysis have been carried out by means of Optical Microscopy (OM) and Scanning Electron Microscopy (SEM).

KW - Epoxy

KW - Fracture toughness

KW - Recycled rubber

KW - SEM

KW - Wear resistance

UR - https://www.scopus.com/pages/publications/85055341194

U2 - 10.1007/978-3-319-95510-0_4

DO - 10.1007/978-3-319-95510-0_4

M3 - Chapter

AN - SCOPUS:85055341194

T3 - Conference Proceedings of the Society for Experimental Mechanics Series

SP - 31

EP - 39

BT - Conference Proceedings of the Society for Experimental Mechanics Series

PB - Springer New York LLC

ER -

Irez AB, Bayraktar E, Miskioglu I. Toughening mechanism in epoxy resin modified recycled rubber based composites reinforced with gamma-alumina, graphene and CNT. In Conference Proceedings of the Society for Experimental Mechanics Series. Springer New York LLC. 2019. p. 31-39. (Conference Proceedings of the Society for Experimental Mechanics Series). doi: 10.1007/978-3-319-95510-0_4

Toughening mechanism in epoxy resin modified recycled rubber based composites reinforced with gamma-alumina, graphene and CNT

Özet

Yayın serisi

Bibliyografik not

BM SKH

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap