The effect of oxidation process on graphene oxide fiber properties

Nuray Ucar*, Ilkay Ozsev Yuksek, Mervin Olmez, Elif Can, Ayşen Onen

*Bu çalışma için yazışmadan sorumlu yazar

Araştırma sonucu: ???type-name???Makalebilirkişi

7 Atıf (Scopus)

Özet

Graphene, a carbon allotrope, became a significant area of research with its superior electrical, mechanical, optical properties, etc. There are several methods to obtain graphene oxide from graphite, one of which is the Hummers method. In this study, several modifications and pre-treatments preceding the Hummers method have been employed. Three different graphene oxide fibers have been produced by three different procedures, i.e. fibers obtained by Hummers method with pre-oxidation step, modified Hummers method and modified Hummers method with pre-oxidation step. It has been observed that pre-oxidation has a significant effect on graphene oxide fiber properties produced by wet spinning process (coagulation). Modified Hummers method without pre-oxidation leads to the highest breaking strength and breaking elongation. Reduced fiber linear density, breaking strength and breaking elongation together with increased crimp were observed in graphene fiber due to the addition of pre-oxidation step.

Orijinal dilİngilizce
Sayfa (başlangıç-bitiş)83-89
Sayfa sayısı7
DergiMaterials Science-Poland
Hacim37
Basın numarası1
DOI'lar
Yayın durumuYayınlandı - 1 Mar 2019

Bibliyografik not

Publisher Copyright:
© 2019 Sciendo. All Rights Reserved.

Finansman

This study is supported by TUBITAK (Project Number 114M524).

FinansörlerFinansör numarası
TUBITAK
Türkiye Bilimsel ve Teknolojik Araştirma Kurumu114M524

    Parmak izi

    The effect of oxidation process on graphene oxide fiber properties' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

    Alıntı Yap