Ana gezinime geç Aramaya geç Ana içeriğe geç

Stability of nanocrystalline structure in Ti-47.5Al-3Cr (at%) alloy produced by mechanical alloying and hot isostatic pressing

  • N. Srisukhumbowornchai*
  • , O. N. Senkov
  • , F. H. Froes
  • , M. L. Ovecoglu
  • , J. Hebeisen
  • *Bu çalışma için yazışmadan sorumlu yazar
  • University of Idaho

Araştırma sonucu: Konferansa katkıYazıbilirkişi

7 Atıf (Scopus)

Özet

Fully dense nanocrystalline Ti-47.5Al-3Cr intermetallic compacts were produced by mechanical alloying and hot isostatic pressing at 725°C. Grain growth behavior of these compacts was studied in the temperature range of 725 to 1100°C for annealing times of 0 to 800 hours, using analytical transmission electron microscopy techniques. The temperature and time dependence of the grain sizes and the grain size distributions were determined, allowing determination of the prevailing transport mechanism responsible for the growth of the nanosized grains.

Orijinal dilİngilizce
Sayfalar243-252
Sayfa sayısı10
Yayın durumuYayınlandı - 1997
Harici olarak yayınlandıEvet
EtkinlikProceedings of the 1997 TMS Annual Meeting - Orlando, FL, USA
Süre: 10 Şub 199713 Şub 1997

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???Proceedings of the 1997 TMS Annual Meeting
ŞehirOrlando, FL, USA
Periyot10/02/9713/02/97

Parmak izi

Stability of nanocrystalline structure in Ti-47.5Al-3Cr (at%) alloy produced by mechanical alloying and hot isostatic pressing' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

Alıntı Yap