Özet
Nowadays, tunnel and underground mining drivage excavation methods have become fully mechanized. Roadheaders are one of the widely used mechanical excavation machines. They have exceptional place in this area because of their low cost and flexibilty. However they have some disadvantages such as not being used in hard and unstable formations. Improvements of this ability can cause stability problems. Therefore evaluation of stability states of these machines in different cutting conditions is vitally important. Stability analysis methods should be used for design and selection of roadheaders and when applying new technologies on them.
| Orijinal dil | İngilizce |
|---|---|
| Ana bilgisayar yayını başlığı | Proceedings of the 3nd World Congress on Mechanical, Chemical, and Material Engineering, MCM 2017 |
| Yayınlayan | Avestia Publishing |
| ISBN (Basılı) | 9781927877326 |
| DOI'lar | |
| Yayın durumu | Yayınlandı - 2017 |
| Etkinlik | Proceedings of the 3nd World Congress on Mechanical, Chemical, and Material Engineering, MCM 2017 - Rome, Italy Süre: 8 Haz 2017 → 10 Haz 2017 |
Yayın serisi
| Adı | Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering |
|---|---|
| ISSN (Elektronik) | 2369-8136 |
???event.eventtypes.event.conference???
| ???event.eventtypes.event.conference??? | Proceedings of the 3nd World Congress on Mechanical, Chemical, and Material Engineering, MCM 2017 |
|---|---|
| Ülke/Bölge | Italy |
| Şehir | Rome |
| Periyot | 8/06/17 → 10/06/17 |
Bibliyografik not
Publisher Copyright:© Avestia Publishing, 2016.