Özet
In the present study, the sliding wear resistances of ZrN and (Zr, 12 wt% Hf)N coatings deposited on a hardened AISI D2 tool steel by arc-physical vapor deposition (PVD) technique were examined by a ball-on-disc wear tester. Alloying of ZrN coating with 12 wt% Hf did not change the hardness significantly, but achieved an improvement on adhesion strength and dry sliding wear resistance against steel (AISI 52100-55HRC) and Al2O3 balls.
| Orijinal dil | İngilizce |
|---|---|
| Sayfa (başlangıç-bitiş) | 297-302 |
| Sayfa sayısı | 6 |
| Dergi | Tribology International |
| Hacim | 39 |
| Basın numarası | 4 |
| DOI'lar | |
| Yayın durumu | Yayınlandı - Nis 2006 |
Finansman
The authors gratefully acknowledge the support of NATO TU PVD Coatings Project for the equipment supplied to the Metallurgical and Material Engineering Department of Istanbul Technical University, which was utilized in this study. The authors would like to thank Mr C. Türküz for the coating of the test samples.
| Finansörler |
|---|
| North Atlantic Treaty Organization |
| Istanbul Teknik Üniversitesi |
Parmak izi
Sliding wear behaviour of ZrN and (Zr, 12 wt% Hf)N coatings' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.Alıntı Yap
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver