Simulation of epp bead manufacturing in batch foaming process through high pressure differential scanning calorimeter (HPDSC)

M. Nofar; Y. Guo; C. B. Park

Simulation of epp bead manufacturing in batch foaming process through high pressure differential scanning calorimeter (HPDSC)

M. Nofar^*
, Y. Guo
, C. B. Park

^*Bu çalışma için yazışmadan sorumlu yazar

University of Toronto

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

Özet

To simulate the evolution of the melting behavior of polypropylene (PP) during the manufacturing of expanded PP bead foams (EPP) through batch process, a high pressure differential scanning calorimeter (HP-DSC) machine was used. The EPP bead foam has two original melting peaks which are suitable for bead foams during the steam chest molding process to produce final products with well sintered beads and good firmness. The influence of various saturation temperatures, time, and pressure on the double crystal melting peak creation is investigated in this work. The results can bring an overestimation of the optimized parameters for the batch process.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011
Sayfalar	2773-2778
Sayfa sayısı	6
Yayın durumu	Yayınlandı - 2011
Harici olarak yayınlandı	Evet
Etkinlik	69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011 - Boston, MA, United States Süre: 1 May 2011 → 5 May 2011

Yayın serisi

Adı	Annual Technical Conference - ANTEC, Conference Proceedings
Hacim	3

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011
Ülke/Bölge	United States
Şehir	Boston, MA
Periyot	1/05/11 → 5/05/11

BM SKH

Bu sonuç, aşağıdaki Sürdürülebilir Kalkınma Hedefine/Hedeflerine katkıda bulunur

SKH 9 Sanayi, Yenilikçilik ve Altyapı

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

@inproceedings{1c33c3f28fe045f1b951e0c1dff82d51,

title = "Simulation of epp bead manufacturing in batch foaming process through high pressure differential scanning calorimeter (HPDSC)",

abstract = "To simulate the evolution of the melting behavior of polypropylene (PP) during the manufacturing of expanded PP bead foams (EPP) through batch process, a high pressure differential scanning calorimeter (HP-DSC) machine was used. The EPP bead foam has two original melting peaks which are suitable for bead foams during the steam chest molding process to produce final products with well sintered beads and good firmness. The influence of various saturation temperatures, time, and pressure on the double crystal melting peak creation is investigated in this work. The results can bring an overestimation of the optimized parameters for the batch process.",

keywords = "Bead, Expanded polypropylene (EPP), Steam chest molding",

author = "M. Nofar and Y. Guo and Park, \{C. B.\}",

year = "2011",

language = "English",

isbn = "9781617829604",

series = "Annual Technical Conference - ANTEC, Conference Proceedings",

pages = "2773--2778",

booktitle = "69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011",

note = "69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011 ; Conference date: 01-05-2011 Through 05-05-2011",

}

Nofar, M, Guo, Y & Park, CB 2011, Simulation of epp bead manufacturing in batch foaming process through high pressure differential scanning calorimeter (HPDSC). in 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011. Annual Technical Conference - ANTEC, Conference Proceedings, hac. 3, pp. 2773-2778, 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, Boston, MA, United States, 1/05/11.

Simulation of epp bead manufacturing in batch foaming process through high pressure differential scanning calorimeter (HPDSC). / Nofar, M.; Guo, Y.; Park, C. B.
69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011. 2011. p. 2773-2778 (Annual Technical Conference - ANTEC, Conference Proceedings; Hac. 3).

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

TY - GEN

T1 - Simulation of epp bead manufacturing in batch foaming process through high pressure differential scanning calorimeter (HPDSC)

AU - Nofar, M.

AU - Guo, Y.

AU - Park, C. B.

PY - 2011

Y1 - 2011

N2 - To simulate the evolution of the melting behavior of polypropylene (PP) during the manufacturing of expanded PP bead foams (EPP) through batch process, a high pressure differential scanning calorimeter (HP-DSC) machine was used. The EPP bead foam has two original melting peaks which are suitable for bead foams during the steam chest molding process to produce final products with well sintered beads and good firmness. The influence of various saturation temperatures, time, and pressure on the double crystal melting peak creation is investigated in this work. The results can bring an overestimation of the optimized parameters for the batch process.

AB - To simulate the evolution of the melting behavior of polypropylene (PP) during the manufacturing of expanded PP bead foams (EPP) through batch process, a high pressure differential scanning calorimeter (HP-DSC) machine was used. The EPP bead foam has two original melting peaks which are suitable for bead foams during the steam chest molding process to produce final products with well sintered beads and good firmness. The influence of various saturation temperatures, time, and pressure on the double crystal melting peak creation is investigated in this work. The results can bring an overestimation of the optimized parameters for the batch process.

KW - Bead

KW - Expanded polypropylene (EPP)

KW - Steam chest molding

UR - https://www.scopus.com/pages/publications/80051828262

M3 - Conference contribution

AN - SCOPUS:80051828262

SN - 9781617829604

T3 - Annual Technical Conference - ANTEC, Conference Proceedings

SP - 2773

EP - 2778

BT - 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011

T2 - 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011

Y2 - 1 May 2011 through 5 May 2011

ER -

Simulation of epp bead manufacturing in batch foaming process through high pressure differential scanning calorimeter (HPDSC)

Özet

Yayın serisi

???event.eventtypes.event.conference???

BM SKH

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap