Selective Laser Sintering Manufacturing and Characterization of Lightweight PA 12 Polymer Composites with Different Hollow Microsphere Additives

Burçin Özbay Kısasöz; I. Ersin Serhatlı; M. Enes Bulduk

doi:10.1007/s11665-021-06481-x

Selective Laser Sintering Manufacturing and Characterization of Lightweight PA 12 Polymer Composites with Different Hollow Microsphere Additives

Burçin Özbay Kısasöz^*, I. Ersin Serhatlı, M. Enes Bulduk

^*Bu çalışma için yazışmadan sorumlu yazar

Kimya Bölümü

Araştırma sonucu: Dergiye katkı › Makale › bilirkişi

11 Atıf (Scopus)

Özet

The use of additives in polyamide polymeric SLS built frameworks further reinforces the goal of developing lightweight components, which serves as the basis for the current investigation. In this paper, different amounts of hollow glass microspheres (HGMs) were added to polyamide 12 (PA 12), and their sintered components were compared for their physical and mechanical properties, including tensile and 3-point bending tests. In terms of density reduction, the PA 12-20HGM composite structure achieved the highest reduction figure of 20.8 %. According to specific strength and modulus calculations, PA 12-20HGS60 and PA 12-20HGM composite structures provided the highest mechanical test results.

Orijinal dil	İngilizce
Sayfa (başlangıç-bitiş)	4049-4059
Sayfa sayısı	11
Dergi	Journal of Materials Engineering and Performance
Hacim	31
Basın numarası	5
DOI'lar	https://doi.org/10.1007/s11665-021-06481-x
Yayın durumu	Yayınlandı - May 2022

Bibliyografik not

Publisher Copyright:
© 2021, ASM International.

Finansman

Fatih Sultan Mehmet Vakif University, Aluminium Test, Training and Research Center is supported by Istanbul Development Agency (ISTKA).

Finansörler	Finansör numarası
Fatih Sultan Mehmet Vakif University
ISTKA
Istanbul Kalkinma Ajansi

BM SKH

Bu sonuç, aşağıdaki Sürdürülebilir Kalkınma Hedefine/Hedeflerine katkıda bulunur

Belgeye Erişim

10.1007/s11665-021-06481-x

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

@article{6f6258a25a6549268596ab1c5939987d,

title = "Selective Laser Sintering Manufacturing and Characterization of Lightweight PA 12 Polymer Composites with Different Hollow Microsphere Additives",

abstract = "The use of additives in polyamide polymeric SLS built frameworks further reinforces the goal of developing lightweight components, which serves as the basis for the current investigation. In this paper, different amounts of hollow glass microspheres (HGMs) were added to polyamide 12 (PA 12), and their sintered components were compared for their physical and mechanical properties, including tensile and 3-point bending tests. In terms of density reduction, the PA 12-20HGM composite structure achieved the highest reduction figure of 20.8 %. According to specific strength and modulus calculations, PA 12-20HGS60 and PA 12-20HGM composite structures provided the highest mechanical test results.",

keywords = "SLS, additive manufacturing, lightweight, polymer composite",

author = "{{\"O}zbay Kısas{\"o}z}, Bur{\c c}in and Serhatlı, {I. Ersin} and Bulduk, {M. Enes}",

note = "Publisher Copyright: {\textcopyright} 2021, ASM International.",

year = "2022",

month = may,

doi = "10.1007/s11665-021-06481-x",

language = "English",

volume = "31",

pages = "4049--4059",

journal = "Journal of Materials Engineering and Performance",

issn = "1059-9495",

publisher = "Springer New York",

number = "5",

}

TY - JOUR

T1 - Selective Laser Sintering Manufacturing and Characterization of Lightweight PA 12 Polymer Composites with Different Hollow Microsphere Additives

AU - Özbay Kısasöz, Burçin

AU - Serhatlı, I. Ersin

AU - Bulduk, M. Enes

PY - 2022/5

Y1 - 2022/5

N2 - The use of additives in polyamide polymeric SLS built frameworks further reinforces the goal of developing lightweight components, which serves as the basis for the current investigation. In this paper, different amounts of hollow glass microspheres (HGMs) were added to polyamide 12 (PA 12), and their sintered components were compared for their physical and mechanical properties, including tensile and 3-point bending tests. In terms of density reduction, the PA 12-20HGM composite structure achieved the highest reduction figure of 20.8 %. According to specific strength and modulus calculations, PA 12-20HGS60 and PA 12-20HGM composite structures provided the highest mechanical test results.

AB - The use of additives in polyamide polymeric SLS built frameworks further reinforces the goal of developing lightweight components, which serves as the basis for the current investigation. In this paper, different amounts of hollow glass microspheres (HGMs) were added to polyamide 12 (PA 12), and their sintered components were compared for their physical and mechanical properties, including tensile and 3-point bending tests. In terms of density reduction, the PA 12-20HGM composite structure achieved the highest reduction figure of 20.8 %. According to specific strength and modulus calculations, PA 12-20HGS60 and PA 12-20HGM composite structures provided the highest mechanical test results.

KW - SLS

KW - additive manufacturing

KW - lightweight

KW - polymer composite

UR - http://www.scopus.com/inward/record.url?scp=85122269138&partnerID=8YFLogxK

U2 - 10.1007/s11665-021-06481-x

DO - 10.1007/s11665-021-06481-x

M3 - Article

AN - SCOPUS:85122269138

SN - 1059-9495

VL - 31

SP - 4049

EP - 4059

JO - Journal of Materials Engineering and Performance

JF - Journal of Materials Engineering and Performance

IS - 5

ER -

Selective Laser Sintering Manufacturing and Characterization of Lightweight PA 12 Polymer Composites with Different Hollow Microsphere Additives

Özet

Bibliyografik not

Finansman

BM SKH

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap