Roasting kinetics of molybdenite concentrates

Selcuk Kan; Kagan Benzesik; Onuralp Yücel

doi:10.1007/978-3-319-72138-5_79

Roasting kinetics of molybdenite concentrates

Selcuk Kan^*
, Kagan Benzesik
, Onuralp Yücel

^*Bu çalışma için yazışmadan sorumlu yazar

Metalurji ve Malzeme Müh.Böl.

Araştırma çıktısı: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › Hakem

1 Atıf (Scopus)

Özet

Molybdenum is a refractory metal that has melting point at ~2610 °C. It has high modulus of elasticity even at elevated temperatures. Almost 80% of molybdenum is used as alloying element for ferromolybdenum. When added to steel, molybdenum increases strength hardenability, toughness, elevated temperature strength and corrosion resistance. Molybdenum metal is produced from its sulphide ore through oxidizing roasting of molybdenite to produce molybdenum trioxide and then purification of molybdenum trioxide and hydrogen reduction of molybdenum trioxide. In this study molybdenite (MoS₂) is roasted in both chamber type furnace and rotary kiln under different conditions such as different temperatures and air atmospheres. Samples were taken off during the roasting process to analyze the sulphur content. After roasting experiments a kinetic study was carried out. Activation energies were calculated for both conditions and compared to each other. The raw materials and the products were characterized by using XRD and AAS.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	9th International Symposium on High-Temperature Metallurgical Processing
Editörler	Ender Keskinkilic, Zhiwei Peng, Mark William Kennedy, Jiann-Yang Hwang, Onuralp Yucel, Jerome P. Downey, Shijie Wang, Rafael Padilla, Baojun Zhao, Dean Gregurek, Tao Jiang
Yayınlayan	Springer International Publishing
Sayfalar	827-831
Sayfa sayısı	5
ISBN (Basılı)	9783319721378
DOI'lar	https://doi.org/10.1007/978-3-319-72138-5_79
Yayın durumu	Yayınlandı - 2018
Etkinlik	9th International Symposium on High-Temperature Metallurgical Processing organized in conjunction with the Annual Meeting and Exhibition, TMS 2018 - Phoenix, United States Süre: 11 Mar 2018 → 15 Mar 2018

Yayın serisi

Adı	Minerals, Metals and Materials Series
Hacim	Part F10
ISSN (Basılı)	2367-1181
ISSN (Elektronik)	2367-1696

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	9th International Symposium on High-Temperature Metallurgical Processing organized in conjunction with the Annual Meeting and Exhibition, TMS 2018
Ülke/Bölge	United States
Şehir	Phoenix
Periyot	11/03/18 → 15/03/18

Bibliyografik not

Publisher Copyright:
© The Minerals, Metals & Materials Society 2018.

Belgeye Erişim

10.1007/978-3-319-72138-5_79

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Kan, S., Benzesik, K., & Yücel, O. (2018). Roasting kinetics of molybdenite concentrates. In E. Keskinkilic, Z. Peng, M. W. Kennedy, J.-Y. Hwang, O. Yucel, J. P. Downey, S. Wang, R. Padilla, B. Zhao, D. Gregurek, & T. Jiang (Eds.), 9th International Symposium on High-Temperature Metallurgical Processing (pp. 827-831). (Minerals, Metals and Materials Series; Hac. Part F10). Springer International Publishing. https://doi.org/10.1007/978-3-319-72138-5_79

Kan, Selcuk ; Benzesik, Kagan ; Yücel, Onuralp. / Roasting kinetics of molybdenite concentrates. 9th International Symposium on High-Temperature Metallurgical Processing. editör / Ender Keskinkilic ; Zhiwei Peng ; Mark William Kennedy ; Jiann-Yang Hwang ; Onuralp Yucel ; Jerome P. Downey ; Shijie Wang ; Rafael Padilla ; Baojun Zhao ; Dean Gregurek ; Tao Jiang. Springer International Publishing, 2018. pp. 827-831 (Minerals, Metals and Materials Series).

@inproceedings{209e9d422f7a4e94a51cfbcb47ef49f8,

title = "Roasting kinetics of molybdenite concentrates",

abstract = "Molybdenum is a refractory metal that has melting point at \textasciitilde{}2610 °C. It has high modulus of elasticity even at elevated temperatures. Almost 80\% of molybdenum is used as alloying element for ferromolybdenum. When added to steel, molybdenum increases strength hardenability, toughness, elevated temperature strength and corrosion resistance. Molybdenum metal is produced from its sulphide ore through oxidizing roasting of molybdenite to produce molybdenum trioxide and then purification of molybdenum trioxide and hydrogen reduction of molybdenum trioxide. In this study molybdenite (MoS2) is roasted in both chamber type furnace and rotary kiln under different conditions such as different temperatures and air atmospheres. Samples were taken off during the roasting process to analyze the sulphur content. After roasting experiments a kinetic study was carried out. Activation energies were calculated for both conditions and compared to each other. The raw materials and the products were characterized by using XRD and AAS.",

keywords = "Molybdenite, Molybdenite roasting, Roasting kinetic",

author = "Selcuk Kan and Kagan Benzesik and Onuralp Y{\"u}cel",

note = "Publisher Copyright: {\textcopyright} The Minerals, Metals \& Materials Society 2018.; 9th International Symposium on High-Temperature Metallurgical Processing organized in conjunction with the Annual Meeting and Exhibition, TMS 2018 ; Conference date: 11-03-2018 Through 15-03-2018",

year = "2018",

doi = "10.1007/978-3-319-72138-5\_79",

language = "English",

isbn = "9783319721378",

series = "Minerals, Metals and Materials Series",

publisher = "Springer International Publishing",

pages = "827--831",

editor = "Ender Keskinkilic and Zhiwei Peng and Kennedy, \{Mark William\} and Jiann-Yang Hwang and Onuralp Yucel and Downey, \{Jerome P.\} and Shijie Wang and Rafael Padilla and Baojun Zhao and Dean Gregurek and Tao Jiang",

booktitle = "9th International Symposium on High-Temperature Metallurgical Processing",

address = "Switzerland",

}

Kan, S , Benzesik, K & Yücel, O 2018, Roasting kinetics of molybdenite concentrates. in E Keskinkilic, Z Peng, MW Kennedy, J-Y Hwang, O Yucel, JP Downey, S Wang, R Padilla, B Zhao, D Gregurek & T Jiang (eds), 9th International Symposium on High-Temperature Metallurgical Processing. Minerals, Metals and Materials Series, hac. Part F10, Springer International Publishing, pp. 827-831, 9th International Symposium on High-Temperature Metallurgical Processing organized in conjunction with the Annual Meeting and Exhibition, TMS 2018, Phoenix, United States, 11/03/18. https://doi.org/10.1007/978-3-319-72138-5_79

Roasting kinetics of molybdenite concentrates. / Kan, Selcuk ; Benzesik, Kagan ; Yücel, Onuralp.
9th International Symposium on High-Temperature Metallurgical Processing. ed. / Ender Keskinkilic; Zhiwei Peng; Mark William Kennedy; Jiann-Yang Hwang; Onuralp Yucel; Jerome P. Downey; Shijie Wang; Rafael Padilla; Baojun Zhao; Dean Gregurek; Tao Jiang. Springer International Publishing, 2018. p. 827-831 (Minerals, Metals and Materials Series; Hac. Part F10).

Araştırma çıktısı: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › Hakem

TY - GEN

T1 - Roasting kinetics of molybdenite concentrates

AU - Kan, Selcuk

AU - Benzesik, Kagan

AU - Yücel, Onuralp

N1 - Publisher Copyright: © The Minerals, Metals & Materials Society 2018.

PY - 2018

Y1 - 2018

N2 - Molybdenum is a refractory metal that has melting point at ~2610 °C. It has high modulus of elasticity even at elevated temperatures. Almost 80% of molybdenum is used as alloying element for ferromolybdenum. When added to steel, molybdenum increases strength hardenability, toughness, elevated temperature strength and corrosion resistance. Molybdenum metal is produced from its sulphide ore through oxidizing roasting of molybdenite to produce molybdenum trioxide and then purification of molybdenum trioxide and hydrogen reduction of molybdenum trioxide. In this study molybdenite (MoS2) is roasted in both chamber type furnace and rotary kiln under different conditions such as different temperatures and air atmospheres. Samples were taken off during the roasting process to analyze the sulphur content. After roasting experiments a kinetic study was carried out. Activation energies were calculated for both conditions and compared to each other. The raw materials and the products were characterized by using XRD and AAS.

AB - Molybdenum is a refractory metal that has melting point at ~2610 °C. It has high modulus of elasticity even at elevated temperatures. Almost 80% of molybdenum is used as alloying element for ferromolybdenum. When added to steel, molybdenum increases strength hardenability, toughness, elevated temperature strength and corrosion resistance. Molybdenum metal is produced from its sulphide ore through oxidizing roasting of molybdenite to produce molybdenum trioxide and then purification of molybdenum trioxide and hydrogen reduction of molybdenum trioxide. In this study molybdenite (MoS2) is roasted in both chamber type furnace and rotary kiln under different conditions such as different temperatures and air atmospheres. Samples were taken off during the roasting process to analyze the sulphur content. After roasting experiments a kinetic study was carried out. Activation energies were calculated for both conditions and compared to each other. The raw materials and the products were characterized by using XRD and AAS.

KW - Molybdenite

KW - Molybdenite roasting

KW - Roasting kinetic

UR - https://www.scopus.com/pages/publications/85042323527

U2 - 10.1007/978-3-319-72138-5_79

DO - 10.1007/978-3-319-72138-5_79

M3 - Conference contribution

AN - SCOPUS:85042323527

SN - 9783319721378

T3 - Minerals, Metals and Materials Series

SP - 827

EP - 831

BT - 9th International Symposium on High-Temperature Metallurgical Processing

A2 - Keskinkilic, Ender

A2 - Peng, Zhiwei

A2 - Kennedy, Mark William

A2 - Hwang, Jiann-Yang

A2 - Yucel, Onuralp

A2 - Downey, Jerome P.

A2 - Wang, Shijie

A2 - Padilla, Rafael

A2 - Zhao, Baojun

A2 - Gregurek, Dean

A2 - Jiang, Tao

PB - Springer International Publishing

T2 - 9th International Symposium on High-Temperature Metallurgical Processing organized in conjunction with the Annual Meeting and Exhibition, TMS 2018

Y2 - 11 March 2018 through 15 March 2018

ER -

Kan S , Benzesik K , Yücel O. Roasting kinetics of molybdenite concentrates. In Keskinkilic E, Peng Z, Kennedy MW, Hwang JY, Yucel O, Downey JP, Wang S, Padilla R, Zhao B, Gregurek D, Jiang T, editörler, 9th International Symposium on High-Temperature Metallurgical Processing. Springer International Publishing. 2018. p. 827-831. (Minerals, Metals and Materials Series). doi: 10.1007/978-3-319-72138-5_79

Roasting kinetics of molybdenite concentrates

Özet

Yayın serisi

???event.eventtypes.event.conference???

Bibliyografik not

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap