PSO algorithm-based optimal tuning of STATCOM for voltage control in a wind farm integrated system

Aysen Demiroren; Merve Guleryuz

PSO algorithm-based optimal tuning of STATCOM for voltage control in a wind farm integrated system

Aysen Demiroren^*
, Merve Guleryuz

^*Bu çalışma için yazışmadan sorumlu yazar

Elektrik Mühendisliği Bölümü

Istanbul Technical University

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

5 Atıf (Scopus)

Özet

In this paper a method based on Particle Swarm Optimization (PSO) algorithm is presented for tuning static synchronous compensator (STATCOM) parameters. STATCOM is used for voltage and reactive power control in a wind farm integrated power system in both steady state and contingency situations. Doubly-fed induction generator (DFIG) is used as the wind generator model. In order to investigate the proposed performance, the method is applied to the IEEE-14 bus test system. Simulations are implemented in Power System Analysis Toolbox (PSAT) and MATLAB. The main purpose of the approach is to keep to voltage at the wind farm connection bus in reference value and to minimize the voltage deviations immediately after a heavy loaded line outage which is connected to the wind farm. Simulation results prove the capability of the PSO technique in optimal tuning of STATCOM for voltage control.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	ELECO 2011 - 7th International Conference on Electrical and Electronics Engineering
Sayfalar	I367-I370
Yayın durumu	Yayınlandı - 2011
Etkinlik	7th International Conference on Electrical and Electronics Engineering, ELECO 2011 - Bursa, Türkiye Süre: 1 Ara 2011 → 4 Ara 2011

Yayın serisi

Adı	ELECO 2011 - 7th International Conference on Electrical and Electronics Engineering

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	7th International Conference on Electrical and Electronics Engineering, ELECO 2011
Ülke/Bölge	Türkiye
Şehir	Bursa
Periyot	1/12/11 → 4/12/11

BM SKH

Bu sonuç, aşağıdaki Sürdürülebilir Kalkınma Hedefine/Hedeflerine katkıda bulunur

SKH 7 Erişilebilir ve Temiz Enerji

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

@inproceedings{b9d2eb1f305048fda1dae2e9636e8045,

title = "PSO algorithm-based optimal tuning of STATCOM for voltage control in a wind farm integrated system",

abstract = "In this paper a method based on Particle Swarm Optimization (PSO) algorithm is presented for tuning static synchronous compensator (STATCOM) parameters. STATCOM is used for voltage and reactive power control in a wind farm integrated power system in both steady state and contingency situations. Doubly-fed induction generator (DFIG) is used as the wind generator model. In order to investigate the proposed performance, the method is applied to the IEEE-14 bus test system. Simulations are implemented in Power System Analysis Toolbox (PSAT) and MATLAB. The main purpose of the approach is to keep to voltage at the wind farm connection bus in reference value and to minimize the voltage deviations immediately after a heavy loaded line outage which is connected to the wind farm. Simulation results prove the capability of the PSO technique in optimal tuning of STATCOM for voltage control.",

author = "Aysen Demiroren and Merve Guleryuz",

year = "2011",

language = "English",

isbn = "9786050102048",

series = "ELECO 2011 - 7th International Conference on Electrical and Electronics Engineering",

pages = "I367--I370",

booktitle = "ELECO 2011 - 7th International Conference on Electrical and Electronics Engineering",

note = "7th International Conference on Electrical and Electronics Engineering, ELECO 2011 ; Conference date: 01-12-2011 Through 04-12-2011",

}

Demiroren, A & Guleryuz, M 2011, PSO algorithm-based optimal tuning of STATCOM for voltage control in a wind farm integrated system. in ELECO 2011 - 7th International Conference on Electrical and Electronics Engineering., 6140223, ELECO 2011 - 7th International Conference on Electrical and Electronics Engineering, pp. I367-I370, 7th International Conference on Electrical and Electronics Engineering, ELECO 2011, Bursa, Türkiye, 1/12/11.

PSO algorithm-based optimal tuning of STATCOM for voltage control in a wind farm integrated system. / Demiroren, Aysen; Guleryuz, Merve.
ELECO 2011 - 7th International Conference on Electrical and Electronics Engineering. 2011. p. I367-I370 6140223 (ELECO 2011 - 7th International Conference on Electrical and Electronics Engineering).

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

TY - GEN

T1 - PSO algorithm-based optimal tuning of STATCOM for voltage control in a wind farm integrated system

AU - Demiroren, Aysen

AU - Guleryuz, Merve

PY - 2011

Y1 - 2011

N2 - In this paper a method based on Particle Swarm Optimization (PSO) algorithm is presented for tuning static synchronous compensator (STATCOM) parameters. STATCOM is used for voltage and reactive power control in a wind farm integrated power system in both steady state and contingency situations. Doubly-fed induction generator (DFIG) is used as the wind generator model. In order to investigate the proposed performance, the method is applied to the IEEE-14 bus test system. Simulations are implemented in Power System Analysis Toolbox (PSAT) and MATLAB. The main purpose of the approach is to keep to voltage at the wind farm connection bus in reference value and to minimize the voltage deviations immediately after a heavy loaded line outage which is connected to the wind farm. Simulation results prove the capability of the PSO technique in optimal tuning of STATCOM for voltage control.

AB - In this paper a method based on Particle Swarm Optimization (PSO) algorithm is presented for tuning static synchronous compensator (STATCOM) parameters. STATCOM is used for voltage and reactive power control in a wind farm integrated power system in both steady state and contingency situations. Doubly-fed induction generator (DFIG) is used as the wind generator model. In order to investigate the proposed performance, the method is applied to the IEEE-14 bus test system. Simulations are implemented in Power System Analysis Toolbox (PSAT) and MATLAB. The main purpose of the approach is to keep to voltage at the wind farm connection bus in reference value and to minimize the voltage deviations immediately after a heavy loaded line outage which is connected to the wind farm. Simulation results prove the capability of the PSO technique in optimal tuning of STATCOM for voltage control.

UR - https://www.scopus.com/pages/publications/84857351809

M3 - Conference contribution

AN - SCOPUS:84857351809

SN - 9786050102048

T3 - ELECO 2011 - 7th International Conference on Electrical and Electronics Engineering

SP - I367-I370

BT - ELECO 2011 - 7th International Conference on Electrical and Electronics Engineering

T2 - 7th International Conference on Electrical and Electronics Engineering, ELECO 2011

Y2 - 1 December 2011 through 4 December 2011

ER -

PSO algorithm-based optimal tuning of STATCOM for voltage control in a wind farm integrated system

Özet

Yayın serisi

???event.eventtypes.event.conference???

BM SKH

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap