Processing and Characterization of Hollow Glass-Filled Polyamide 12 Composites by Selective Laser Sintering Method

Burçin Özbay*, Ersin Serhatlı

*Bu çalışma için yazışmadan sorumlu yazar

Araştırma sonucu: Dergiye katkıMakalebilirkişi

19 Atıf (Scopus)

Özet

Selective Laser Sintering (SLS) is an accepted and improving technique for additive manufacturing in many different areas, from the applications of aerospace to automotive, consumer products to dental and medical materials. Lightweighting is a significant issue, especially in terms of the automotive and aerospace industries, mainly to increase fuel efficiency and reduce CO2 emission. The density reduction can be obtained by the addition of Hollow Glass Microspheres (HGMs) to Polyamide 12 (PA 12) polymer matrix. This study covers the different amounts of HGM filled PA 12 productions by SLS method and final structure characterization of PA 12-HGM composites. According to the performing thermal, physical, and mechanical tests, on increasing the amount of HGM in the structure, 10, 15, 20 weight percentages, respectively, the density of composites has been reduced significantly up to 20% for 20% of HGM filled PA 12 (PA 12–20HGM) composite, besides having a substantial rise in E-modulus.

Orijinal dilİngilizce
Sayfa (başlangıç-bitiş)213-223
Sayfa sayısı11
DergiMaterials Technology
Hacim37
Basın numarası4
DOI'lar
Yayın durumuYayınlandı - 2022

Bibliyografik not

Publisher Copyright:
© 2020 Informa UK Limited, trading as Taylor & Francis Group.

Finansman

Fatih Sultan Mehmet Vakif University, Aluminum Test Training and Research Center is supported by Istanbul Development Agency (ISTKA).

FinansörlerFinansör numarası
ISTKA
Istanbul Kalkinma Ajansi

    Parmak izi

    Processing and Characterization of Hollow Glass-Filled Polyamide 12 Composites by Selective Laser Sintering Method' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

    Alıntı Yap