Özet
pH-/temperature-sensitive ampholytic poly(N-isopropylacrylamide) (PNIPAAm) hydrogels containing N-[3-(dimethylamino)propyl]methacrylamide-itaconic acid (DMAPMAAm-IA) and DMAPMAAm-AMPS (2-acrylamido-2-methylpropane sulfonic acid) comonomer pairs have been designed and then synthesized. The results showed that (i) disk diameters and transparencies in the range of pH 2–12 increased only with increasing content of AMPS in the ampholytic NIPAAm/DMAPMAAm/AMPS hydrogels containing 10.0 mol % of DMAPMAAm + AMPS mixtures; (ii) maximum compressive strengths of NIPAAm/IA (62.5 ± 10.0 kPa) was higher than NIPAAm/AMPS (26.9 ± 1.1 kPa) hydrogels in DDW at 37 °C. (iii) In case of DFNa release, the decreasing values of n (≈0.30–0.50) indicated that ampholytic PNIPAAm hydrogels served as diffusion barrier.
Orijinal dil | İngilizce |
---|---|
Sayfa (başlangıç-bitiş) | 1148-1163 |
Sayfa sayısı | 16 |
Dergi | International Journal of Polymeric Materials and Polymeric Biomaterials |
Hacim | 71 |
Basın numarası | 15 |
DOI'lar | |
Yayın durumu | Yayınlandı - 2022 |
Bibliyografik not
Publisher Copyright:© 2021 Taylor & Francis Group, LLC.
Finansman
This work was supported by the Scientific Research Project Coordination Center of Istanbul Technical University (ITU) (Scientific Research Project Fund with the Project number 38387). We thank Dr. Gökhan Göksu for guidance on MATLABTM calculations.
Finansörler | Finansör numarası |
---|---|
Istanbul Teknik Üniversitesi | 38387 |