Özet
The TiO2 nanoparticles exhibit a remarkable photocatalytic activity against wastewater organic pollutants but their separation from the liquid media after the photocatalytic process is a very difficult task. The immobilization of TiO2 on different supports could be a good solution to simplify the cleaning stage after photocatalysis. In this study, two types of photoactive polymer-cement composites named macro-defect free cements (MDF) were obtained both by embedding TiO2 nanoparticles (Degussa P25) in the composite matrix and by photocatalyst deposition on the composites surface through the dip-coating method (in two types of recipe). The composites surface was characterized by SEM and XRD and photocatalytic efficiency was determined against wastewater tannins from woodworking industry. The tannin concentration was monitored by VIS-spectrophotometry, using the Folin-Ciocalteu method. All specimens evidenced photocatalytic activity. The process efficiency is dependent on the light wavelength and on the irradiation duration. The best results were obtained when the MDF containing embedded TiO2 nanoparticles were exposed to 254 nm light (92% after 6 h). Under higher wavelength light irradiation (365 nm), the photocatalytic efficiency decreased to 48.2% for the MDF containing embedded TiO2 and to 39.85% for the MDF coated with a TiO2 film. The obtained results are promising both in terms of environmental protection, considering the persistence of tannins in wastewaters and the difficulties of their removal through the classic methods, and in terms of MDF property improvement, considering its potentially very large range of applications.
Orijinal dil | İngilizce |
---|---|
Sayfa (başlangıç-bitiş) | 4357-4367 |
Sayfa sayısı | 11 |
Dergi | Journal of Environmental Chemical Engineering |
Hacim | 6 |
Basın numarası | 4 |
DOI'lar | |
Yayın durumu | Yayınlandı - Ağu 2018 |
Bibliyografik not
Publisher Copyright:© 2018 Elsevier Ltd. All rights reserved.