Performance of new α-β SiAlONs in turning operations

H. Mandal; F. Kara; S. Turan; A. Kara

Performance of new α-β SiAlONs in turning operations

H. Mandal^*
, F. Kara
, S. Turan
, A. Kara

^*Bu çalışma için yazışmadan sorumlu yazar

Anadolu University

Araştırma sonucu: Dergiye katkı › Konferans makalesi › bilirkişi

5 Atıf (Scopus)

Özet

New α-β SiAlON ceramics were produced, characterised and tested in turning operations of cast iron. Cutting speeds varied between 400-1200 m/min while feeding rates were between 0.3 to 0.5 mm/rev. The results were compared with some of commercially available ceramic inserts. It was proved that new α-β SiAlONs offer reduced tool wear and hence increased tool life for cast iron machining.

Orijinal dil	İngilizce
Sayfa (başlangıç-bitiş)	929-932
Sayfa sayısı	4
Dergi	Key Engineering Materials
Hacim	206-213
Basın numarası	II
Yayın durumu	Yayınlandı - 2001
Harici olarak yayınlandı	Evet
Etkinlik	7th Conference and Exhibition of the European Ceramic Society - Brugge, Belgium Süre: 9 Eyl 2001 → 13 Eyl 2001

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

@article{681c161051644611bf87fe897fda960f,

title = "Performance of new α-β SiAlONs in turning operations",

abstract = "New α-β SiAlON ceramics were produced, characterised and tested in turning operations of cast iron. Cutting speeds varied between 400-1200 m/min while feeding rates were between 0.3 to 0.5 mm/rev. The results were compared with some of commercially available ceramic inserts. It was proved that new α-β SiAlONs offer reduced tool wear and hence increased tool life for cast iron machining.",

keywords = "Cutting tool, SiAlON, Turning Operations, α-β",

author = "H. Mandal and F. Kara and S. Turan and A. Kara",

year = "2001",

language = "English",

volume = "206-213",

pages = "929--932",

journal = "Key Engineering Materials",

issn = "1013-9826",

publisher = "Trans Tech Publications Ltd",

number = "II",

note = "7th Conference and Exhibition of the European Ceramic Society ; Conference date: 09-09-2001 Through 13-09-2001",

}

TY - JOUR

T1 - Performance of new α-β SiAlONs in turning operations

AU - Mandal, H.

AU - Kara, F.

AU - Turan, S.

AU - Kara, A.

PY - 2001

Y1 - 2001

N2 - New α-β SiAlON ceramics were produced, characterised and tested in turning operations of cast iron. Cutting speeds varied between 400-1200 m/min while feeding rates were between 0.3 to 0.5 mm/rev. The results were compared with some of commercially available ceramic inserts. It was proved that new α-β SiAlONs offer reduced tool wear and hence increased tool life for cast iron machining.

AB - New α-β SiAlON ceramics were produced, characterised and tested in turning operations of cast iron. Cutting speeds varied between 400-1200 m/min while feeding rates were between 0.3 to 0.5 mm/rev. The results were compared with some of commercially available ceramic inserts. It was proved that new α-β SiAlONs offer reduced tool wear and hence increased tool life for cast iron machining.

KW - Cutting tool

KW - SiAlON

KW - Turning Operations

KW - α-β

UR - https://www.scopus.com/pages/publications/0034782576

M3 - Conference article

AN - SCOPUS:0034782576

SN - 1013-9826

VL - 206-213

SP - 929

EP - 932

JO - Key Engineering Materials

JF - Key Engineering Materials

IS - II

T2 - 7th Conference and Exhibition of the European Ceramic Society

Y2 - 9 September 2001 through 13 September 2001

ER -

Performance of new α-β SiAlONs in turning operations

Özet

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap