Optimization of milling conditions for the production of fine silver powders

H. Kübra Yumakgil, Hasan Gökçe, Burak Özkal, Sebahattin Gürmen, M. Lütfi Öveçoglu

Araştırma sonucu: ???type-name???Konferans katkısıbilirkişi

2 Atıf (Scopus)


High energy milling of ductile metals is difficult because of their flattening tendency under milling deformation. These powders are easily cold welded to each other and get flattened. Therefore, to ensure their continuous fragmentation is a complex process which needs optimization of milling parameters and in most cases it is necessary to add process control agents. Silver is a good example having above mentioned difficulties. In this study high energy milling behavior of Ag powders was studied under different milling conditions. Milled powders were characterized via XRD, BET, LPS measurements and SEM observations for the optimization of the milling conditions for achieving continuous fragmentation of Ag powders leading fine powders.

Orijinal dilİngilizce
Ana bilgisayar yayını başlığıLinking Science and Technology for Global Solution - Proceedings of Symposia held during TMS 2009 Annual Meeting and Exhibition
Sayfa sayısı6
Yayın durumuYayınlandı - 2009
EtkinlikTMS 2009 Annual Meeting and Exhibition - San Francisco, CA, United States
Süre: 16 Şub 200919 Şub 2009

Yayın serisi

AdıTMS Annual Meeting


???event.eventtypes.event.conference???TMS 2009 Annual Meeting and Exhibition
Ülke/BölgeUnited States
ŞehirSan Francisco, CA

Parmak izi

Optimization of milling conditions for the production of fine silver powders' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

Alıntı Yap