Optimization of connection analysis in aircraft structures

Fatma Nur Evren; Ibrahim Ozkol

doi:10.1109/ICMAE.2017.8038707

Optimization of connection analysis in aircraft structures

Fatma Nur Evren, Ibrahim Ozkol

Uçak Mühendisliği Bölümü

Istanbul Technical University

Araştırma sonucu: ???type-name??? › Konferans katkısı › bilirkişi

Özet

In this study, rivet optimization is analyzed for a channel section of a fuselage frame. Rivets are captured by using beam elements in ANSYS Workbench. In order to optimize locations of rivets, basic rivet group on frame is analyzed by using given output loads (forces and moment). Based on this analysis, hand calculation was conducted then Workbench optimization option in ANSYS is used to find out the best option of locating rivets on a fuselage frame. The results from Workbench study are compared to each other based on safety margins and shear forces due to aircraft industry being highly regulated and safety critical.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	2017 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017
Yayınlayan	Institute of Electrical and Electronics Engineers Inc.
Sayfalar	552-555
Sayfa sayısı	4
ISBN (Elektronik)	9781538633052
DOI'lar	https://doi.org/10.1109/ICMAE.2017.8038707
Yayın durumu	Yayınlandı - 14 Eyl 2017
Etkinlik	8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017 - Prague, Czech Republic Süre: 22 Tem 2017 → 25 Tem 2017

Yayın serisi

Adı	2017 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017
Ülke/Bölge	Czech Republic
Şehir	Prague
Periyot	22/07/17 → 25/07/17

Bibliyografik not

Publisher Copyright:
© 2017 IEEE.

Belgeye Erişim

10.1109/ICMAE.2017.8038707

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Evren, F. N., & Ozkol, I. (2017). Optimization of connection analysis in aircraft structures. In 2017 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017 (pp. 552-555). Makale 8038707 (2017 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICMAE.2017.8038707

@inproceedings{aded140e0f3d46a8910774b6944601cc,

title = "Optimization of connection analysis in aircraft structures",

abstract = "In this study, rivet optimization is analyzed for a channel section of a fuselage frame. Rivets are captured by using beam elements in ANSYS Workbench. In order to optimize locations of rivets, basic rivet group on frame is analyzed by using given output loads (forces and moment). Based on this analysis, hand calculation was conducted then Workbench optimization option in ANSYS is used to find out the best option of locating rivets on a fuselage frame. The results from Workbench study are compared to each other based on safety margins and shear forces due to aircraft industry being highly regulated and safety critical.",

keywords = "aircraft structures, ANSYS Workbench, beam elements, connection analysis, fuselage frame, optimization, rivet",

author = "Evren, {Fatma Nur} and Ibrahim Ozkol",

note = "Publisher Copyright: {\textcopyright} 2017 IEEE.; 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017 ; Conference date: 22-07-2017 Through 25-07-2017",

year = "2017",

month = sep,

day = "14",

doi = "10.1109/ICMAE.2017.8038707",

language = "English",

series = "2017 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "552--555",

booktitle = "2017 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017",

address = "United States",

}

Evren, FN & Ozkol, I 2017, Optimization of connection analysis in aircraft structures. in 2017 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017., 8038707, 2017 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017, Institute of Electrical and Electronics Engineers Inc., pp. 552-555, 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017, Prague, Czech Republic, 22/07/17. https://doi.org/10.1109/ICMAE.2017.8038707

Optimization of connection analysis in aircraft structures. / Evren, Fatma Nur; Ozkol, Ibrahim.
2017 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017. Institute of Electrical and Electronics Engineers Inc., 2017. p. 552-555 8038707 (2017 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017).

Araştırma sonucu: ???type-name??? › Konferans katkısı › bilirkişi

TY - GEN

T1 - Optimization of connection analysis in aircraft structures

AU - Evren, Fatma Nur

AU - Ozkol, Ibrahim

PY - 2017/9/14

Y1 - 2017/9/14

N2 - In this study, rivet optimization is analyzed for a channel section of a fuselage frame. Rivets are captured by using beam elements in ANSYS Workbench. In order to optimize locations of rivets, basic rivet group on frame is analyzed by using given output loads (forces and moment). Based on this analysis, hand calculation was conducted then Workbench optimization option in ANSYS is used to find out the best option of locating rivets on a fuselage frame. The results from Workbench study are compared to each other based on safety margins and shear forces due to aircraft industry being highly regulated and safety critical.

AB - In this study, rivet optimization is analyzed for a channel section of a fuselage frame. Rivets are captured by using beam elements in ANSYS Workbench. In order to optimize locations of rivets, basic rivet group on frame is analyzed by using given output loads (forces and moment). Based on this analysis, hand calculation was conducted then Workbench optimization option in ANSYS is used to find out the best option of locating rivets on a fuselage frame. The results from Workbench study are compared to each other based on safety margins and shear forces due to aircraft industry being highly regulated and safety critical.

KW - aircraft structures

KW - ANSYS Workbench

KW - beam elements

KW - connection analysis

KW - fuselage frame

KW - optimization

KW - rivet

UR - http://www.scopus.com/inward/record.url?scp=85032377242&partnerID=8YFLogxK

U2 - 10.1109/ICMAE.2017.8038707

DO - 10.1109/ICMAE.2017.8038707

M3 - Conference contribution

AN - SCOPUS:85032377242

T3 - 2017 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017

SP - 552

EP - 555

BT - 2017 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017

Y2 - 22 July 2017 through 25 July 2017

ER -

Evren FN, Ozkol I. Optimization of connection analysis in aircraft structures. In 2017 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017. Institute of Electrical and Electronics Engineers Inc. 2017. p. 552-555. 8038707. (2017 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017). doi: 10.1109/ICMAE.2017.8038707

Optimization of connection analysis in aircraft structures

Özet

Yayın serisi

???event.eventtypes.event.conference???

Bibliyografik not

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap