Morphological Character of Blasted Talc Particles on Talc Flotation

Onur Güven; Fırat Karakaş; Gökhan Yaşar; Mehmet S. Çelik

Morphological Character of Blasted Talc Particles on Talc Flotation

Onur Güven
, Fırat Karakaş
, Gökhan Yaşar
, Mehmet S. Çelik

Cevher Hazırlama Mühendisliği Bölümü

Istanbul Technical University

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

Özet

In this study, blasting method was applied to modify the morphology of particles. The extent of blasting was changed at different nozzle pressures through which shape factor and roughness of particles and their corresponding flotation recoveries were investigated. Performance of un-blasted and blasted particles in the system was measured by floating the particles of different characters in a micro-flotation cell. The results of these tests were correlated with shape factors and roughness values of particles that were analysed with Image Analysis, SEM and Optical Profilometer methods. It is shown that particles of higher angularity and roughness exhibited better floatability.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering, MCM 2015
Editörler	Jamal Chaouki, Yuyuan Zhao
Yayınlayan	Avestia Publishing
ISBN (Basılı)	9781927877173
Yayın durumu	Yayınlandı - 2015
Etkinlik	World Congress on Mechanical, Chemical, and Material Engineering, MCM 2015 - Barcelona, Spain Süre: 20 Tem 2015 → 21 Tem 2015

Yayın serisi

Adı	Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering
ISSN (Elektronik)	2369-8136

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	World Congress on Mechanical, Chemical, and Material Engineering, MCM 2015
Ülke/Bölge	Spain
Şehir	Barcelona
Periyot	20/07/15 → 21/07/15

Bibliyografik not

Publisher Copyright:
© 2015, Avestia Publishing. All rights reserved.

Finansman

This work was supported by "The Scientific and (TUBITAK) with a project number of 214M433.

Finansörler	Finansör numarası
Türkiye Bilimsel ve Teknolojik Araştırma Kurumu	214M433

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Güven, Onur ; Karakaş, Fırat ; Yaşar, Gökhan et al. / Morphological Character of Blasted Talc Particles on Talc Flotation. Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering, MCM 2015. editör / Jamal Chaouki ; Yuyuan Zhao. Avestia Publishing, 2015. (Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering).

@inproceedings{2f2ba6da674a4c7e940a14a78855ad40,

title = "Morphological Character of Blasted Talc Particles on Talc Flotation",

abstract = "In this study, blasting method was applied to modify the morphology of particles. The extent of blasting was changed at different nozzle pressures through which shape factor and roughness of particles and their corresponding flotation recoveries were investigated. Performance of un-blasted and blasted particles in the system was measured by floating the particles of different characters in a micro-flotation cell. The results of these tests were correlated with shape factors and roughness values of particles that were analysed with Image Analysis, SEM and Optical Profilometer methods. It is shown that particles of higher angularity and roughness exhibited better floatability.",

keywords = "Blasting, Micro-Flotation, Morphology, Recovery, Roughness",

author = "Onur G{\"u}ven and Fırat Karaka{\c s} and G{\"o}khan Ya{\c s}ar and {\c C}elik, \{Mehmet S.\}",

note = "Publisher Copyright: {\textcopyright} 2015, Avestia Publishing. All rights reserved.; World Congress on Mechanical, Chemical, and Material Engineering, MCM 2015 ; Conference date: 20-07-2015 Through 21-07-2015",

year = "2015",

language = "English",

isbn = "9781927877173",

series = "Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering",

publisher = "Avestia Publishing",

editor = "Jamal Chaouki and Yuyuan Zhao",

booktitle = "Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering, MCM 2015",

address = "Canada",

}

Güven, O, Karakaş, F, Yaşar, G & Çelik, MS 2015, Morphological Character of Blasted Talc Particles on Talc Flotation. in J Chaouki & Y Zhao (eds), Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering, MCM 2015. Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering, Avestia Publishing, World Congress on Mechanical, Chemical, and Material Engineering, MCM 2015, Barcelona, Spain, 20/07/15.

Morphological Character of Blasted Talc Particles on Talc Flotation. / Güven, Onur; Karakaş, Fırat; Yaşar, Gökhan et al.
Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering, MCM 2015. ed. / Jamal Chaouki; Yuyuan Zhao. Avestia Publishing, 2015. (Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering).

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

TY - GEN

T1 - Morphological Character of Blasted Talc Particles on Talc Flotation

AU - Güven, Onur

AU - Karakaş, Fırat

AU - Yaşar, Gökhan

AU - Çelik, Mehmet S.

PY - 2015

Y1 - 2015

N2 - In this study, blasting method was applied to modify the morphology of particles. The extent of blasting was changed at different nozzle pressures through which shape factor and roughness of particles and their corresponding flotation recoveries were investigated. Performance of un-blasted and blasted particles in the system was measured by floating the particles of different characters in a micro-flotation cell. The results of these tests were correlated with shape factors and roughness values of particles that were analysed with Image Analysis, SEM and Optical Profilometer methods. It is shown that particles of higher angularity and roughness exhibited better floatability.

AB - In this study, blasting method was applied to modify the morphology of particles. The extent of blasting was changed at different nozzle pressures through which shape factor and roughness of particles and their corresponding flotation recoveries were investigated. Performance of un-blasted and blasted particles in the system was measured by floating the particles of different characters in a micro-flotation cell. The results of these tests were correlated with shape factors and roughness values of particles that were analysed with Image Analysis, SEM and Optical Profilometer methods. It is shown that particles of higher angularity and roughness exhibited better floatability.

KW - Blasting

KW - Micro-Flotation

KW - Morphology

KW - Recovery

KW - Roughness

UR - https://www.scopus.com/pages/publications/85146666783

M3 - Conference contribution

AN - SCOPUS:85146666783

SN - 9781927877173

T3 - Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering

BT - Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering, MCM 2015

A2 - Chaouki, Jamal

A2 - Zhao, Yuyuan

PB - Avestia Publishing

T2 - World Congress on Mechanical, Chemical, and Material Engineering, MCM 2015

Y2 - 20 July 2015 through 21 July 2015

ER -

Morphological Character of Blasted Talc Particles on Talc Flotation

Özet

Yayın serisi

???event.eventtypes.event.conference???

Bibliyografik not

Finansman

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap