Modeling of distribution transformer for analysis of core losses of different core materials using FEM

Kamran Dawood, Guven Komurgoz, Fatih Isik

Araştırma sonucu: ???type-name???Konferans katkısıbilirkişi

24 Atıf (Scopus)

Özet

The core losses of the transformer are mainly dependent on the material of the transformer core. The material of the transformer core just not minimize the cost of the core losses but also increase the lifetime of the transformer. M5 material cold rolled grain oriented silicon steel is generally used for the manufacturing of the core of the transformer. In this study, 2- dimensional finite element models are used to determine the core losses of the transformer. M5 and M4 cold rolled grain oriented silicon steel materials were used for the manufacturing of the transformer core. In this study, a core loss of the three phase distribution transformer with a power of 400 kVA and a voltage level of 30/0.4 kV was investigated and the results presented in this paper are based on the finite element analysis. The results show that the core losses in the M4 cold rolled grain oriented silicon steel material are lesser than the M5 core material. For validation, the results of the finite element results are compared with the experimental results.

Orijinal dilİngilizce
Ana bilgisayar yayını başlığı2019 8th International Conference on Modeling Simulation and Applied Optimization, ICMSAO 2019
YayınlayanInstitute of Electrical and Electronics Engineers Inc.
ISBN (Elektronik)9781538676844
DOI'lar
Yayın durumuYayınlandı - Nis 2019
Etkinlik8th International Conference on Modeling Simulation and Applied Optimization, ICMSAO 2019 - Manama, Bahrain
Süre: 15 Nis 201917 Nis 2019

Yayın serisi

Adı2019 8th International Conference on Modeling Simulation and Applied Optimization, ICMSAO 2019

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???8th International Conference on Modeling Simulation and Applied Optimization, ICMSAO 2019
Ülke/BölgeBahrain
ŞehirManama
Periyot15/04/1917/04/19

Bibliyografik not

Publisher Copyright:
© 2019 IEEE.

Parmak izi

Modeling of distribution transformer for analysis of core losses of different core materials using FEM' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

Alıntı Yap