Manufacturing of a Hybrid VTOL UAV Using Rapid Prototyping Techniques

Sinan Alnıpak; Turan Konyalıoğlu; İbrahim Halil Şahin; Erdinç Altuğ

doi:10.1007/978-3-031-37160-8_30

Manufacturing of a Hybrid VTOL UAV Using Rapid Prototyping Techniques

Sinan Alnıpak^*
, Turan Konyalıoğlu
, İbrahim Halil Şahin
, Erdinç Altuğ

^*Bu çalışma için yazışmadan sorumlu yazar

Makina Mühendisliği Bölümü

Istanbul Technical University

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Bölüm › bilirkişi

2 Atıf (Scopus)

Özet

Unmanned aerial vehicle technologies have gained serious momentum in recent years. Despite these developments, the production of a UAV still requires expensive equipment. Recently, with the developments in rapid prototyping technologies, some researchers printed and flew 3D printed UAVs, successfully. In this study, we investigate the possibility of using 3D printer technology for the manufacturing of a 3.8-m wingspan hybrid UAV. It has been observed that it is possible to manufacture bigger UAVs with this approach, which is promising in making the production of UAVs accessible to the general public.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	Sustainable Aviation
Yayınlayan	Springer Nature
Sayfalar	193-200
Sayfa sayısı	8
DOI'lar	https://doi.org/10.1007/978-3-031-37160-8_30
Yayın durumu	Yayınlandı - 2023

Yayın serisi

Adı	Sustainable Aviation
Hacim	Part F4677
ISSN (Basılı)	2730-7778
ISSN (Elektronik)	2730-7786

Bibliyografik not

Publisher Copyright:
© The Author(s), under exclusive license to Springer Nature Switzerland AG 2023.

BM SKH

Bu sonuç, aşağıdaki Sürdürülebilir Kalkınma Hedefine/Hedeflerine katkıda bulunur

SKH 9 Sanayi, Yenilikçilik ve Altyapı

Belgeye Erişim

10.1007/978-3-031-37160-8_30

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

@inbook{94328acf3f5a4e38a118eeeca318af42,

title = "Manufacturing of a Hybrid VTOL UAV Using Rapid Prototyping Techniques",

abstract = "Unmanned aerial vehicle technologies have gained serious momentum in recent years. Despite these developments, the production of a UAV still requires expensive equipment. Recently, with the developments in rapid prototyping technologies, some researchers printed and flew 3D printed UAVs, successfully. In this study, we investigate the possibility of using 3D printer technology for the manufacturing of a 3.8-m wingspan hybrid UAV. It has been observed that it is possible to manufacture bigger UAVs with this approach, which is promising in making the production of UAVs accessible to the general public.",

keywords = "Hybrid UAV, Rapid prototyping, Vacuum infusion",

author = "Sinan Alnıpak and Turan Konyalıoğlu and {\c S}ahin, \{İbrahim Halil\} and Erdin{\c c} Altuğ",

note = "Publisher Copyright: {\textcopyright} The Author(s), under exclusive license to Springer Nature Switzerland AG 2023.",

year = "2023",

doi = "10.1007/978-3-031-37160-8\_30",

language = "English",

series = "Sustainable Aviation",

publisher = "Springer Nature",

pages = "193--200",

booktitle = "Sustainable Aviation",

address = "Switzerland",

}

TY - CHAP

T1 - Manufacturing of a Hybrid VTOL UAV Using Rapid Prototyping Techniques

AU - Alnıpak, Sinan

AU - Konyalıoğlu, Turan

AU - Şahin, İbrahim Halil

AU - Altuğ, Erdinç

PY - 2023

Y1 - 2023

N2 - Unmanned aerial vehicle technologies have gained serious momentum in recent years. Despite these developments, the production of a UAV still requires expensive equipment. Recently, with the developments in rapid prototyping technologies, some researchers printed and flew 3D printed UAVs, successfully. In this study, we investigate the possibility of using 3D printer technology for the manufacturing of a 3.8-m wingspan hybrid UAV. It has been observed that it is possible to manufacture bigger UAVs with this approach, which is promising in making the production of UAVs accessible to the general public.

AB - Unmanned aerial vehicle technologies have gained serious momentum in recent years. Despite these developments, the production of a UAV still requires expensive equipment. Recently, with the developments in rapid prototyping technologies, some researchers printed and flew 3D printed UAVs, successfully. In this study, we investigate the possibility of using 3D printer technology for the manufacturing of a 3.8-m wingspan hybrid UAV. It has been observed that it is possible to manufacture bigger UAVs with this approach, which is promising in making the production of UAVs accessible to the general public.

KW - Hybrid UAV

KW - Rapid prototyping

KW - Vacuum infusion

UR - https://www.scopus.com/pages/publications/105006793576

U2 - 10.1007/978-3-031-37160-8_30

DO - 10.1007/978-3-031-37160-8_30

M3 - Chapter

AN - SCOPUS:105006793576

T3 - Sustainable Aviation

SP - 193

EP - 200

BT - Sustainable Aviation

PB - Springer Nature

ER -

Manufacturing of a Hybrid VTOL UAV Using Rapid Prototyping Techniques

Özet

Yayın serisi

Bibliyografik not

BM SKH

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap