Ana gezinime geç Aramaya geç Ana içeriğe geç

Machinable tricalcium phosphateilanthanum phospt iate composites

  • Celaletdin Ergun*
  • *Bu çalışma için yazışmadan sorumlu yazar

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde BölümKonferans katkısıbilirkişi

1 Atıf (Scopus)

Özet

Tricalcium phosphate (TCP) composites with lanthanum phosphate were prepared with pressureless air sintering at 500. 700, 900, 1100 and 1300°C for 2 hrs. The composites were characterized in terms of phase stability during sintering, inicrostructural evaluation with XRD. SEM and machinability with simple drilling operation. Tricalcium phosphate and lanthanum phosphate phases were stable up to I 1 00°C. However, partial reaction forming Ca8La2(P04)602 was observed during sintering at 1300°C. As a result, tricalciuin phosphate and lanthanum phosphate composites sintered at I 100°C showed phase stability insuring weak interface. Thus, these composites fulfilled the requirement for machinability.

Orijinal dilİngilizce
Ana bilgisayar yayını başlığıAdvances in Bioceramics and Porous Ceramics - A Collection of Papers Presented at the 32nd International Conference on Advanced Ceramics and Composites, ICACC 2008
Sayfalar53-62
Sayfa sayısı10
Baskı7
Yayın durumuYayınlandı - 2009
EtkinlikAdvances in Bioceramics and Porous Ceramics - 32nd International Conference on Advanced Ceramics and Composites, ICACC 2008 - Daytona Beach, FL, United States
Süre: 27 Oca 20081 Şub 2008

Yayın serisi

AdıCeramic Engineering and Science Proceedings
Sayı7
Hacim29
ISSN (Basılı)0196-6219

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???Advances in Bioceramics and Porous Ceramics - 32nd International Conference on Advanced Ceramics and Composites, ICACC 2008
Ülke/BölgeUnited States
ŞehirDaytona Beach, FL
Periyot27/01/081/02/08

Parmak izi

Machinable tricalcium phosphateilanthanum phospt iate composites' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

Alıntı Yap