Low temperature nitriding of a martensitic stainless steel

Riza Karadas; Ozgur Celik; Huseyin Cimenoglu

doi:10.4028/www.scientific.net/DDF.312-315.994

Low temperature nitriding of a martensitic stainless steel

Riza Karadas^*
, Ozgur Celik
, Huseyin Cimenoglu

^*Bu çalışma için yazışmadan sorumlu yazar

Metalurji ve Malzeme Müh.Böl.

Istanbul Technical University

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

3 Atıf (Scopus)

Özet

In this study, AISI 420 grade martensitic stainless steel was subjected to low temperature gas nitriding in a fluidized bed reactor. Penetration of nitrogen into the steel produced a CrN free surface layer (about 15 μm thick) consisted of iron nitride (ε and γ ′) and expanded martensite (α_N). Formation of this surface layer accompanied not only by remarkable increase in the surface hardness, but also caused significant improvement in wear and corrosion resistances.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	Diffusion in Solids and Liquids VI
Ana bilgisayar yayını alt yazısı	Mass Transfer - Heat Transfer - Microstructure and Properties - Nanodiffusion and Nanostructured Materials
Yayınlayan	Trans Tech Publications Ltd
Sayfalar	994-999
Sayfa sayısı	6
Hacim	312-315
ISBN (Basılı)	9783037851173
DOI'lar	https://doi.org/10.4028/www.scientific.net/DDF.312-315.994
Yayın durumu	Yayınlandı - 2011

Belgeye Erişim

10.4028/www.scientific.net/DDF.312-315.994

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Karadas, R., Celik, O., & Cimenoglu, H. (2011). Low temperature nitriding of a martensitic stainless steel. In Diffusion in Solids and Liquids VI: Mass Transfer - Heat Transfer - Microstructure and Properties - Nanodiffusion and Nanostructured Materials (Hac. 312-315, pp. 994-999). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/DDF.312-315.994

@inproceedings{671fa0b6c7a24b599e7e0d8d1e89217f,

title = "Low temperature nitriding of a martensitic stainless steel",

abstract = "In this study, AISI 420 grade martensitic stainless steel was subjected to low temperature gas nitriding in a fluidized bed reactor. Penetration of nitrogen into the steel produced a CrN free surface layer (about 15 μm thick) consisted of iron nitride (ε and γ ′) and expanded martensite (αN). Formation of this surface layer accompanied not only by remarkable increase in the surface hardness, but also caused significant improvement in wear and corrosion resistances.",

keywords = "Corrosion, Martensitic stainless steel, Nitriding, Wear",

author = "Riza Karadas and Ozgur Celik and Huseyin Cimenoglu",

year = "2011",

doi = "10.4028/www.scientific.net/DDF.312-315.994",

language = "English",

isbn = "9783037851173",

volume = "312-315",

pages = "994--999",

booktitle = "Diffusion in Solids and Liquids VI",

publisher = "Trans Tech Publications Ltd",

address = "Switzerland",

}

Low temperature nitriding of a martensitic stainless steel. / Karadas, Riza; Celik, Ozgur; Cimenoglu, Huseyin.
Diffusion in Solids and Liquids VI: Mass Transfer - Heat Transfer - Microstructure and Properties - Nanodiffusion and Nanostructured Materials. Hac. 312-315 Trans Tech Publications Ltd, 2011. p. 994-999.

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

TY - GEN

T1 - Low temperature nitriding of a martensitic stainless steel

AU - Karadas, Riza

AU - Celik, Ozgur

AU - Cimenoglu, Huseyin

PY - 2011

Y1 - 2011

N2 - In this study, AISI 420 grade martensitic stainless steel was subjected to low temperature gas nitriding in a fluidized bed reactor. Penetration of nitrogen into the steel produced a CrN free surface layer (about 15 μm thick) consisted of iron nitride (ε and γ ′) and expanded martensite (αN). Formation of this surface layer accompanied not only by remarkable increase in the surface hardness, but also caused significant improvement in wear and corrosion resistances.

AB - In this study, AISI 420 grade martensitic stainless steel was subjected to low temperature gas nitriding in a fluidized bed reactor. Penetration of nitrogen into the steel produced a CrN free surface layer (about 15 μm thick) consisted of iron nitride (ε and γ ′) and expanded martensite (αN). Formation of this surface layer accompanied not only by remarkable increase in the surface hardness, but also caused significant improvement in wear and corrosion resistances.

KW - Corrosion

KW - Martensitic stainless steel

KW - Nitriding

KW - Wear

UR - https://www.scopus.com/pages/publications/79955854602

U2 - 10.4028/www.scientific.net/DDF.312-315.994

DO - 10.4028/www.scientific.net/DDF.312-315.994

M3 - Conference contribution

AN - SCOPUS:79955854602

SN - 9783037851173

VL - 312-315

SP - 994

EP - 999

BT - Diffusion in Solids and Liquids VI

PB - Trans Tech Publications Ltd

ER -

Low temperature nitriding of a martensitic stainless steel

Özet

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap