Load sharing analysis of identical wound rotor induction motors driving the same load

Abdulhamit Kurt; Ahmet Kubilay Atalay; Derya Ahmet Kocabas

doi:10.1109/CACS.2016.7973918

Load sharing analysis of identical wound rotor induction motors driving the same load

Abdulhamit Kurt, Ahmet Kubilay Atalay^*, Derya Ahmet Kocabas

^*Bu çalışma için yazışmadan sorumlu yazar

Elektrik Mühendisliği Bölümü

Istanbul Technical University

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

1 Atıf (Scopus)

Özet

In this study, load sharing in tandem connected wound rotor induction motors and the effect of change in rotor resistance on load sharing were investigated. A mathematical model for a single motor was developed in MATLAB/Simulink. Then this model was doubled for two motors where the shaft speed feed-back is the same. Motors can be identical or different. The combined model and individual models are all simulated to compare and verify the results. Solutions by changing the rotor resistance for known problematic situations met in load sharing of cage induction motors were investigated. It was seen that load sharing problems caused by different rated speeds can be achieved in the cost of a reduction in shaft power and efficiency.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	2016 International Automatic Control Conference, CACS 2016
Yayınlayan	Institute of Electrical and Electronics Engineers Inc.
Sayfalar	247-251
Sayfa sayısı	5
ISBN (Elektronik)	9781509041084
DOI'lar	https://doi.org/10.1109/CACS.2016.7973918
Yayın durumu	Yayınlandı - 10 Tem 2017
Etkinlik	2016 International Automatic Control Conference, CACS 2016 - Taichung, Taiwan, Province of China Süre: 9 Kas 2016 → 11 Kas 2016

Yayın serisi

Adı	2016 International Automatic Control Conference, CACS 2016

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	2016 International Automatic Control Conference, CACS 2016
Ülke/Bölge	Taiwan, Province of China
Şehir	Taichung
Periyot	9/11/16 → 11/11/16

Bibliyografik not

Publisher Copyright:
© 2016 IEEE.

Belgeye Erişim

10.1109/CACS.2016.7973918

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Kurt, A., Atalay, A. K., & Kocabas, D. A. (2017). Load sharing analysis of identical wound rotor induction motors driving the same load. In 2016 International Automatic Control Conference, CACS 2016 (pp. 247-251). Makale 7973918 (2016 International Automatic Control Conference, CACS 2016). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/CACS.2016.7973918

@inproceedings{27986849b2b44a81a68a36a66d299cc7,

title = "Load sharing analysis of identical wound rotor induction motors driving the same load",

abstract = "In this study, load sharing in tandem connected wound rotor induction motors and the effect of change in rotor resistance on load sharing were investigated. A mathematical model for a single motor was developed in MATLAB/Simulink. Then this model was doubled for two motors where the shaft speed feed-back is the same. Motors can be identical or different. The combined model and individual models are all simulated to compare and verify the results. Solutions by changing the rotor resistance for known problematic situations met in load sharing of cage induction motors were investigated. It was seen that load sharing problems caused by different rated speeds can be achieved in the cost of a reduction in shaft power and efficiency.",

author = "Abdulhamit Kurt and Atalay, {Ahmet Kubilay} and Kocabas, {Derya Ahmet}",

note = "Publisher Copyright: {\textcopyright} 2016 IEEE.; 2016 International Automatic Control Conference, CACS 2016 ; Conference date: 09-11-2016 Through 11-11-2016",

year = "2017",

month = jul,

day = "10",

doi = "10.1109/CACS.2016.7973918",

language = "English",

series = "2016 International Automatic Control Conference, CACS 2016",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "247--251",

booktitle = "2016 International Automatic Control Conference, CACS 2016",

address = "United States",

}

Kurt, A, Atalay, AK & Kocabas, DA 2017, Load sharing analysis of identical wound rotor induction motors driving the same load. in 2016 International Automatic Control Conference, CACS 2016., 7973918, 2016 International Automatic Control Conference, CACS 2016, Institute of Electrical and Electronics Engineers Inc., pp. 247-251, 2016 International Automatic Control Conference, CACS 2016, Taichung, Taiwan, Province of China, 9/11/16. https://doi.org/10.1109/CACS.2016.7973918

Load sharing analysis of identical wound rotor induction motors driving the same load. / Kurt, Abdulhamit; Atalay, Ahmet Kubilay; Kocabas, Derya Ahmet.
2016 International Automatic Control Conference, CACS 2016. Institute of Electrical and Electronics Engineers Inc., 2017. p. 247-251 7973918 (2016 International Automatic Control Conference, CACS 2016).

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

TY - GEN

T1 - Load sharing analysis of identical wound rotor induction motors driving the same load

AU - Kurt, Abdulhamit

AU - Atalay, Ahmet Kubilay

AU - Kocabas, Derya Ahmet

PY - 2017/7/10

Y1 - 2017/7/10

N2 - In this study, load sharing in tandem connected wound rotor induction motors and the effect of change in rotor resistance on load sharing were investigated. A mathematical model for a single motor was developed in MATLAB/Simulink. Then this model was doubled for two motors where the shaft speed feed-back is the same. Motors can be identical or different. The combined model and individual models are all simulated to compare and verify the results. Solutions by changing the rotor resistance for known problematic situations met in load sharing of cage induction motors were investigated. It was seen that load sharing problems caused by different rated speeds can be achieved in the cost of a reduction in shaft power and efficiency.

AB - In this study, load sharing in tandem connected wound rotor induction motors and the effect of change in rotor resistance on load sharing were investigated. A mathematical model for a single motor was developed in MATLAB/Simulink. Then this model was doubled for two motors where the shaft speed feed-back is the same. Motors can be identical or different. The combined model and individual models are all simulated to compare and verify the results. Solutions by changing the rotor resistance for known problematic situations met in load sharing of cage induction motors were investigated. It was seen that load sharing problems caused by different rated speeds can be achieved in the cost of a reduction in shaft power and efficiency.

UR - http://www.scopus.com/inward/record.url?scp=85027549675&partnerID=8YFLogxK

U2 - 10.1109/CACS.2016.7973918

DO - 10.1109/CACS.2016.7973918

M3 - Conference contribution

AN - SCOPUS:85027549675

T3 - 2016 International Automatic Control Conference, CACS 2016

SP - 247

EP - 251

BT - 2016 International Automatic Control Conference, CACS 2016

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2016 International Automatic Control Conference, CACS 2016

Y2 - 9 November 2016 through 11 November 2016

ER -

Load sharing analysis of identical wound rotor induction motors driving the same load

Özet

Yayın serisi

???event.eventtypes.event.conference???

Bibliyografik not

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap