LEFFICIENT AND VERSATILE 3D WOVEN COMPOSITE MANUFACTURING: NOVEL APPROACHES ON THE QUALITY OF COMPOSITE FABRICATION

Muhammed Ali Vural; Emir Karci; Melisa Dincer; Mert Celikturk; Ibrahim Halil Sahin; Burak Yatkin; Cagin Emre; Basak Ozkendirci; Elif Ozden Yenigun; Hulya Cebeci

LEFFICIENT AND VERSATILE 3D WOVEN COMPOSITE MANUFACTURING: NOVEL APPROACHES ON THE QUALITY OF COMPOSITE FABRICATION

Muhammed Ali Vural
, Emir Karci
, Melisa Dincer
, Mert Celikturk
, Ibrahim Halil Sahin
, Burak Yatkin
, Cagin Emre
, Basak Ozkendirci
, Elif Ozden Yenigun
, Hulya Cebeci

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

Özet

The complex and hollow nature of 3D spacer fabrics require novel approaches to achieve efficient transfer of resin to the structure with a uniform fashion. In this work, a custom-built spray system is designed and built to achive an effective wetting of 3D I-beam fabrics for a high-quality composite manufacturing of a spacer structure. The spray-wetted 3D I-beam composites were manufactured with a custom-designed 3D molding for 600 TEX glass fiber and epoxy resin. Since achieving high-quality composites is essential to accomplish the required mechanical characteristics, the 3D I-beam composites fabricated with vacuum infused process were also compared with spray-wetted and molded specimens. The quality of both specimens was evaluated by optical microscopy images for void content and the results clearly demonstrated a higher void content of 5, 65 times more for spray wetted specimens compared to produced ones with vacuum infusion. The results of the three-point bending tests were in line with the calculated void content. 3-point bending results of vacuum infused 3D composites were measured as 13, 3 MPa where the spray-wetted 3D composites presented as 11, 6 MPa.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	Materials
Editörler	Anastasios P. Vassilopoulos, Veronique Michaud
Yayınlayan	Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL)
Sayfalar	532-538
Sayfa sayısı	7
ISBN (Elektronik)	9782970161400
Yayın durumu	Yayınlandı - 2022
Etkinlik	20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022 - Lausanne, Switzerland Süre: 26 Haz 2022 → 30 Haz 2022

Yayın serisi

Adı	ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability
Hacim	1

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022
Ülke/Bölge	Switzerland
Şehir	Lausanne
Periyot	26/06/22 → 30/06/22

Bibliyografik not

Publisher Copyright:
© 2022 Vural et al.

Finansman

This study was funded by the Scientific and Technological Research Council of Turkey (TUBITAK: project number 218M703 (218M704)) 1003 Primary Subjects R&D Funding Program. The authors would also like to thank to the conference funding for M.Ali Vural provided by TUBITAK 2244-A Support Program for Participation in Abroad Scientific Events.

Finansörler	Finansör numarası
Türkiye Bilimsel ve Teknolojik Araştırma Kurumu	218M703, 218M704

BM SKH

Bu sonuç, aşağıdaki Sürdürülebilir Kalkınma Hedefine/Hedeflerine katkıda bulunur

SKH 9 Sanayi, Yenilikçilik ve Altyapı

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Vural, M. A., Karci, E., Dincer, M., Celikturk, M., Sahin, I. H., Yatkin, B., Emre, C., Ozkendirci, B., Yenigun, E. O., & Cebeci, H. (2022). LEFFICIENT AND VERSATILE 3D WOVEN COMPOSITE MANUFACTURING: NOVEL APPROACHES ON THE QUALITY OF COMPOSITE FABRICATION. In A. P. Vassilopoulos, & V. Michaud (Eds.), Materials (pp. 532-538). (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; Hac. 1). Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL).

Vural, Muhammed Ali ; Karci, Emir ; Dincer, Melisa et al. / LEFFICIENT AND VERSATILE 3D WOVEN COMPOSITE MANUFACTURING : NOVEL APPROACHES ON THE QUALITY OF COMPOSITE FABRICATION. Materials. editör / Anastasios P. Vassilopoulos ; Veronique Michaud. Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL), 2022. pp. 532-538 (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability).

@inproceedings{6a407412f49b4a549d5d9dbe4d6cd4c5,

title = "LEFFICIENT AND VERSATILE 3D WOVEN COMPOSITE MANUFACTURING: NOVEL APPROACHES ON THE QUALITY OF COMPOSITE FABRICATION",

abstract = "The complex and hollow nature of 3D spacer fabrics require novel approaches to achieve efficient transfer of resin to the structure with a uniform fashion. In this work, a custom-built spray system is designed and built to achive an effective wetting of 3D I-beam fabrics for a high-quality composite manufacturing of a spacer structure. The spray-wetted 3D I-beam composites were manufactured with a custom-designed 3D molding for 600 TEX glass fiber and epoxy resin. Since achieving high-quality composites is essential to accomplish the required mechanical characteristics, the 3D I-beam composites fabricated with vacuum infused process were also compared with spray-wetted and molded specimens. The quality of both specimens was evaluated by optical microscopy images for void content and the results clearly demonstrated a higher void content of 5, 65 times more for spray wetted specimens compared to produced ones with vacuum infusion. The results of the three-point bending tests were in line with the calculated void content. 3-point bending results of vacuum infused 3D composites were measured as 13, 3 MPa where the spray-wetted 3D composites presented as 11, 6 MPa.",

keywords = "3D weaving, composite quality, flexural strength, structural composite, woven preform",

author = "Vural, \{Muhammed Ali\} and Emir Karci and Melisa Dincer and Mert Celikturk and Sahin, \{Ibrahim Halil\} and Burak Yatkin and Cagin Emre and Basak Ozkendirci and Yenigun, \{Elif Ozden\} and Hulya Cebeci",

note = "Publisher Copyright: {\textcopyright} 2022 Vural et al.; 20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022 ; Conference date: 26-06-2022 Through 30-06-2022",

year = "2022",

language = "English",

series = "ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability",

publisher = "Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL)",

pages = "532--538",

editor = "Vassilopoulos, \{Anastasios P.\} and Veronique Michaud",

booktitle = "Materials",

}

Vural, MA, Karci, E, Dincer, M, Celikturk, M, Sahin, IH, Yatkin, B, Emre, C, Ozkendirci, B, Yenigun, EO & Cebeci, H 2022, LEFFICIENT AND VERSATILE 3D WOVEN COMPOSITE MANUFACTURING: NOVEL APPROACHES ON THE QUALITY OF COMPOSITE FABRICATION. in AP Vassilopoulos & V Michaud (eds), Materials. ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability, hac. 1, Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL), pp. 532-538, 20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022, Lausanne, Switzerland, 26/06/22.

LEFFICIENT AND VERSATILE 3D WOVEN COMPOSITE MANUFACTURING: NOVEL APPROACHES ON THE QUALITY OF COMPOSITE FABRICATION. / Vural, Muhammed Ali; Karci, Emir; Dincer, Melisa et al.
Materials. ed. / Anastasios P. Vassilopoulos; Veronique Michaud. Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL), 2022. p. 532-538 (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; Hac. 1).

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

TY - GEN

T1 - LEFFICIENT AND VERSATILE 3D WOVEN COMPOSITE MANUFACTURING

T2 - 20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022

AU - Vural, Muhammed Ali

AU - Karci, Emir

AU - Dincer, Melisa

AU - Celikturk, Mert

AU - Sahin, Ibrahim Halil

AU - Yatkin, Burak

AU - Emre, Cagin

AU - Ozkendirci, Basak

AU - Yenigun, Elif Ozden

AU - Cebeci, Hulya

PY - 2022

Y1 - 2022

N2 - The complex and hollow nature of 3D spacer fabrics require novel approaches to achieve efficient transfer of resin to the structure with a uniform fashion. In this work, a custom-built spray system is designed and built to achive an effective wetting of 3D I-beam fabrics for a high-quality composite manufacturing of a spacer structure. The spray-wetted 3D I-beam composites were manufactured with a custom-designed 3D molding for 600 TEX glass fiber and epoxy resin. Since achieving high-quality composites is essential to accomplish the required mechanical characteristics, the 3D I-beam composites fabricated with vacuum infused process were also compared with spray-wetted and molded specimens. The quality of both specimens was evaluated by optical microscopy images for void content and the results clearly demonstrated a higher void content of 5, 65 times more for spray wetted specimens compared to produced ones with vacuum infusion. The results of the three-point bending tests were in line with the calculated void content. 3-point bending results of vacuum infused 3D composites were measured as 13, 3 MPa where the spray-wetted 3D composites presented as 11, 6 MPa.

AB - The complex and hollow nature of 3D spacer fabrics require novel approaches to achieve efficient transfer of resin to the structure with a uniform fashion. In this work, a custom-built spray system is designed and built to achive an effective wetting of 3D I-beam fabrics for a high-quality composite manufacturing of a spacer structure. The spray-wetted 3D I-beam composites were manufactured with a custom-designed 3D molding for 600 TEX glass fiber and epoxy resin. Since achieving high-quality composites is essential to accomplish the required mechanical characteristics, the 3D I-beam composites fabricated with vacuum infused process were also compared with spray-wetted and molded specimens. The quality of both specimens was evaluated by optical microscopy images for void content and the results clearly demonstrated a higher void content of 5, 65 times more for spray wetted specimens compared to produced ones with vacuum infusion. The results of the three-point bending tests were in line with the calculated void content. 3-point bending results of vacuum infused 3D composites were measured as 13, 3 MPa where the spray-wetted 3D composites presented as 11, 6 MPa.

KW - 3D weaving

KW - composite quality

KW - flexural strength

KW - structural composite

KW - woven preform

UR - https://www.scopus.com/pages/publications/85149171660

M3 - Conference contribution

AN - SCOPUS:85149171660

T3 - ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability

SP - 532

EP - 538

BT - Materials

A2 - Vassilopoulos, Anastasios P.

A2 - Michaud, Veronique

PB - Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL)

Y2 - 26 June 2022 through 30 June 2022

ER -

Vural MA, Karci E, Dincer M, Celikturk M, Sahin IH, Yatkin B et al. LEFFICIENT AND VERSATILE 3D WOVEN COMPOSITE MANUFACTURING: NOVEL APPROACHES ON THE QUALITY OF COMPOSITE FABRICATION. In Vassilopoulos AP, Michaud V, editörler, Materials. Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL). 2022. p. 532-538. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability).

LEFFICIENT AND VERSATILE 3D WOVEN COMPOSITE MANUFACTURING: NOVEL APPROACHES ON THE QUALITY OF COMPOSITE FABRICATION

Özet

Yayın serisi

???event.eventtypes.event.conference???

Bibliyografik not

Finansman

BM SKH

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap