Investigation of Microstructure and Mechanical Properties of Ferritic Stainless Steels Joined by Laser Welding

Günseli Güç; Onuralp Yücel

doi:10.1007/978-3-030-92388-4_38

Investigation of Microstructure and Mechanical Properties of Ferritic Stainless Steels Joined by Laser Welding

Günseli Güç^*
, Onuralp Yücel

^*Bu çalışma için yazışmadan sorumlu yazar

Metalurji ve Malzeme Müh.Böl.

Istanbul Technical University

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

Özet

Laser welding is widely used in the joining of materials due to the advantages it provides. This study aims to investigate the suitability of different ferritic stainless steels to laser welding method. Within the scope, ferritic stainless steel sheets with a thickness of 0.5 mm of different grades (430, 430Ti and 441) were welded by solid-state disk laser, and welding parameters were determined as 1300 W power, 6 m/min welding speed in continuous wave mode. As a shielding gas, argon was used. Metallographic examinations, SEM–EDS analysis, microhardness measurement were performed, and tensile, cupping tests, and bending tests were carried out with welded and unwelded samples. Thus, the structure and property relationships of ferritic stainless steels joined by laser welding were examined and compared. As a result, adequate welding quality could not be achieved in 430 samples, and it was observed that the welding ability was insufficient compared to 430Ti and 441 samples.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	12th International Symposium on High-Temperature Metallurgical Processing
Editörler	Zhiwei Peng, Jiann-Yang Hwang, Jesse F. White, Jerome P. Downey, Dean Gregurek, Baojun Zhao, Onuralp Yücel, Ender Keskinkilic, Tao Jiang, Morsi Mohamed Mahmoud
Yayınlayan	Springer Science and Business Media Deutschland GmbH
Sayfalar	423-432
Sayfa sayısı	10
ISBN (Basılı)	9783030923877
DOI'lar	https://doi.org/10.1007/978-3-030-92388-4_38
Yayın durumu	Yayınlandı - 2022
Etkinlik	12th International Symposium on High-TemperatureMetallurgical Processing held at the TMS Annual Meeting and Exhibition, 2022 - Anaheim, United States Süre: 27 Şub 2022 → 3 Mar 2022

Yayın serisi

Adı	Minerals, Metals and Materials Series
ISSN (Basılı)	2367-1181
ISSN (Elektronik)	2367-1696

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	12th International Symposium on High-TemperatureMetallurgical Processing held at the TMS Annual Meeting and Exhibition, 2022
Ülke/Bölge	United States
Şehir	Anaheim
Periyot	27/02/22 → 3/03/22

Bibliyografik not

Publisher Copyright:
© 2022, The Minerals, Metals & Materials Society.

Belgeye Erişim

10.1007/978-3-030-92388-4_38

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Güç, G., & Yücel, O. (2022). Investigation of Microstructure and Mechanical Properties of Ferritic Stainless Steels Joined by Laser Welding. In Z. Peng, J.-Y. Hwang, J. F. White, J. P. Downey, D. Gregurek, B. Zhao, O. Yücel, E. Keskinkilic, T. Jiang, & M. M. Mahmoud (Eds.), 12th International Symposium on High-Temperature Metallurgical Processing (pp. 423-432). (Minerals, Metals and Materials Series). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-3-030-92388-4_38

Güç, Günseli ; Yücel, Onuralp. / Investigation of Microstructure and Mechanical Properties of Ferritic Stainless Steels Joined by Laser Welding. 12th International Symposium on High-Temperature Metallurgical Processing. editör / Zhiwei Peng ; Jiann-Yang Hwang ; Jesse F. White ; Jerome P. Downey ; Dean Gregurek ; Baojun Zhao ; Onuralp Yücel ; Ender Keskinkilic ; Tao Jiang ; Morsi Mohamed Mahmoud. Springer Science and Business Media Deutschland GmbH, 2022. pp. 423-432 (Minerals, Metals and Materials Series).

@inproceedings{5db01bea93554cee9cd279476366ccc2,

title = "Investigation of Microstructure and Mechanical Properties of Ferritic Stainless Steels Joined by Laser Welding",

abstract = "Laser welding is widely used in the joining of materials due to the advantages it provides. This study aims to investigate the suitability of different ferritic stainless steels to laser welding method. Within the scope, ferritic stainless steel sheets with a thickness of 0.5 mm of different grades (430, 430Ti and 441) were welded by solid-state disk laser, and welding parameters were determined as 1300 W power, 6 m/min welding speed in continuous wave mode. As a shielding gas, argon was used. Metallographic examinations, SEM–EDS analysis, microhardness measurement were performed, and tensile, cupping tests, and bending tests were carried out with welded and unwelded samples. Thus, the structure and property relationships of ferritic stainless steels joined by laser welding were examined and compared. As a result, adequate welding quality could not be achieved in 430 samples, and it was observed that the welding ability was insufficient compared to 430Ti and 441 samples.",

keywords = "Joining steels, Laser welding, Stainless steels",

author = "G{\"u}nseli G{\"u}{\c c} and Onuralp Y{\"u}cel",

note = "Publisher Copyright: {\textcopyright} 2022, The Minerals, Metals \& Materials Society.; 12th International Symposium on High-TemperatureMetallurgical Processing held at the TMS Annual Meeting and Exhibition, 2022 ; Conference date: 27-02-2022 Through 03-03-2022",

year = "2022",

doi = "10.1007/978-3-030-92388-4\_38",

language = "English",

isbn = "9783030923877",

series = "Minerals, Metals and Materials Series",

publisher = "Springer Science and Business Media Deutschland GmbH",

pages = "423--432",

editor = "Zhiwei Peng and Jiann-Yang Hwang and White, \{Jesse F.\} and Downey, \{Jerome P.\} and Dean Gregurek and Baojun Zhao and Onuralp Y{\"u}cel and Ender Keskinkilic and Tao Jiang and Mahmoud, \{Morsi Mohamed\}",

booktitle = "12th International Symposium on High-Temperature Metallurgical Processing",

address = "Germany",

}

Güç, G & Yücel, O 2022, Investigation of Microstructure and Mechanical Properties of Ferritic Stainless Steels Joined by Laser Welding. in Z Peng, J-Y Hwang, JF White, JP Downey, D Gregurek, B Zhao, O Yücel, E Keskinkilic, T Jiang & MM Mahmoud (eds), 12th International Symposium on High-Temperature Metallurgical Processing. Minerals, Metals and Materials Series, Springer Science and Business Media Deutschland GmbH, pp. 423-432, 12th International Symposium on High-TemperatureMetallurgical Processing held at the TMS Annual Meeting and Exhibition, 2022, Anaheim, United States, 27/02/22. https://doi.org/10.1007/978-3-030-92388-4_38

Investigation of Microstructure and Mechanical Properties of Ferritic Stainless Steels Joined by Laser Welding. / Güç, Günseli; Yücel, Onuralp.
12th International Symposium on High-Temperature Metallurgical Processing. ed. / Zhiwei Peng; Jiann-Yang Hwang; Jesse F. White; Jerome P. Downey; Dean Gregurek; Baojun Zhao; Onuralp Yücel; Ender Keskinkilic; Tao Jiang; Morsi Mohamed Mahmoud. Springer Science and Business Media Deutschland GmbH, 2022. p. 423-432 (Minerals, Metals and Materials Series).

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

TY - GEN

T1 - Investigation of Microstructure and Mechanical Properties of Ferritic Stainless Steels Joined by Laser Welding

AU - Güç, Günseli

AU - Yücel, Onuralp

PY - 2022

Y1 - 2022

N2 - Laser welding is widely used in the joining of materials due to the advantages it provides. This study aims to investigate the suitability of different ferritic stainless steels to laser welding method. Within the scope, ferritic stainless steel sheets with a thickness of 0.5 mm of different grades (430, 430Ti and 441) were welded by solid-state disk laser, and welding parameters were determined as 1300 W power, 6 m/min welding speed in continuous wave mode. As a shielding gas, argon was used. Metallographic examinations, SEM–EDS analysis, microhardness measurement were performed, and tensile, cupping tests, and bending tests were carried out with welded and unwelded samples. Thus, the structure and property relationships of ferritic stainless steels joined by laser welding were examined and compared. As a result, adequate welding quality could not be achieved in 430 samples, and it was observed that the welding ability was insufficient compared to 430Ti and 441 samples.

AB - Laser welding is widely used in the joining of materials due to the advantages it provides. This study aims to investigate the suitability of different ferritic stainless steels to laser welding method. Within the scope, ferritic stainless steel sheets with a thickness of 0.5 mm of different grades (430, 430Ti and 441) were welded by solid-state disk laser, and welding parameters were determined as 1300 W power, 6 m/min welding speed in continuous wave mode. As a shielding gas, argon was used. Metallographic examinations, SEM–EDS analysis, microhardness measurement were performed, and tensile, cupping tests, and bending tests were carried out with welded and unwelded samples. Thus, the structure and property relationships of ferritic stainless steels joined by laser welding were examined and compared. As a result, adequate welding quality could not be achieved in 430 samples, and it was observed that the welding ability was insufficient compared to 430Ti and 441 samples.

KW - Joining steels

KW - Laser welding

KW - Stainless steels

UR - https://www.scopus.com/pages/publications/85125235578

U2 - 10.1007/978-3-030-92388-4_38

DO - 10.1007/978-3-030-92388-4_38

M3 - Conference contribution

AN - SCOPUS:85125235578

SN - 9783030923877

T3 - Minerals, Metals and Materials Series

SP - 423

EP - 432

BT - 12th International Symposium on High-Temperature Metallurgical Processing

A2 - Peng, Zhiwei

A2 - Hwang, Jiann-Yang

A2 - White, Jesse F.

A2 - Downey, Jerome P.

A2 - Gregurek, Dean

A2 - Zhao, Baojun

A2 - Yücel, Onuralp

A2 - Keskinkilic, Ender

A2 - Jiang, Tao

A2 - Mahmoud, Morsi Mohamed

PB - Springer Science and Business Media Deutschland GmbH

T2 - 12th International Symposium on High-TemperatureMetallurgical Processing held at the TMS Annual Meeting and Exhibition, 2022

Y2 - 27 February 2022 through 3 March 2022

ER -

Güç G, Yücel O. Investigation of Microstructure and Mechanical Properties of Ferritic Stainless Steels Joined by Laser Welding. In Peng Z, Hwang JY, White JF, Downey JP, Gregurek D, Zhao B, Yücel O, Keskinkilic E, Jiang T, Mahmoud MM, editörler, 12th International Symposium on High-Temperature Metallurgical Processing. Springer Science and Business Media Deutschland GmbH. 2022. p. 423-432. (Minerals, Metals and Materials Series). doi: 10.1007/978-3-030-92388-4_38

Investigation of Microstructure and Mechanical Properties of Ferritic Stainless Steels Joined by Laser Welding

Özet

Yayın serisi

???event.eventtypes.event.conference???

Bibliyografik not

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap