Investigation of melting in a single-screw extruder

Atakan Altinkaynak; Mahesh Gupta; Mark A. Spalding; Sam L. Crabtree

Investigation of melting in a single-screw extruder

Atakan Altinkaynak^*, Mahesh Gupta, Mark A. Spalding, Sam L. Crabtree

^*Bu çalışma için yazışmadan sorumlu yazar

Araştırma sonucu: Konferansa katkı › Yazı › bilirkişi

8 Atıf (Scopus)

Özet

Screw freezing experiments in a single-screw extruder were conducted for an ABS resin. The melting of ABS was also simulated by a full three-dimensional simulation of the two-phase flow in the compression section of the extruder. Numerical simulations as well as experiments exhibit the Maddock melting mechanism. However, numerical predictions and experimental data have some discrepancies, which are discussed.

Orijinal dil	İngilizce
Sayfalar	809-813
Sayfa sayısı	5
Yayın durumu	Yayınlandı - 2006
Harici olarak yayınlandı	Evet
Etkinlik	Society of Plastics Engineers Annual Technical Conference 2006, ANTEC 2006 - Charlotte, NC, United States Süre: 7 May 2006 → 11 May 2006

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	Society of Plastics Engineers Annual Technical Conference 2006, ANTEC 2006
Ülke/Bölge	United States
Şehir	Charlotte, NC
Periyot	7/05/06 → 11/05/06

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

@conference{6216ec1ba17b487ca996822f02c910b0,

title = "Investigation of melting in a single-screw extruder",

abstract = "Screw freezing experiments in a single-screw extruder were conducted for an ABS resin. The melting of ABS was also simulated by a full three-dimensional simulation of the two-phase flow in the compression section of the extruder. Numerical simulations as well as experiments exhibit the Maddock melting mechanism. However, numerical predictions and experimental data have some discrepancies, which are discussed.",

author = "Atakan Altinkaynak and Mahesh Gupta and Spalding, {Mark A.} and Crabtree, {Sam L.}",

year = "2006",

language = "English",

pages = "809--813",

note = "Society of Plastics Engineers Annual Technical Conference 2006, ANTEC 2006 ; Conference date: 07-05-2006 Through 11-05-2006",

}

TY - CONF

T1 - Investigation of melting in a single-screw extruder

AU - Altinkaynak, Atakan

AU - Gupta, Mahesh

AU - Spalding, Mark A.

AU - Crabtree, Sam L.

PY - 2006

Y1 - 2006

N2 - Screw freezing experiments in a single-screw extruder were conducted for an ABS resin. The melting of ABS was also simulated by a full three-dimensional simulation of the two-phase flow in the compression section of the extruder. Numerical simulations as well as experiments exhibit the Maddock melting mechanism. However, numerical predictions and experimental data have some discrepancies, which are discussed.

AB - Screw freezing experiments in a single-screw extruder were conducted for an ABS resin. The melting of ABS was also simulated by a full three-dimensional simulation of the two-phase flow in the compression section of the extruder. Numerical simulations as well as experiments exhibit the Maddock melting mechanism. However, numerical predictions and experimental data have some discrepancies, which are discussed.

UR - http://www.scopus.com/inward/record.url?scp=33745608478&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:33745608478

SP - 809

EP - 813

T2 - Society of Plastics Engineers Annual Technical Conference 2006, ANTEC 2006

Y2 - 7 May 2006 through 11 May 2006

ER -

Investigation of melting in a single-screw extruder

Özet

???event.eventtypes.event.conference???

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap