Investigation of adhesion and friction of an isotropic composite pillar

Turgay Eray; İlker Murat Koç; Bilsay Sümer

doi:10.1177/1350650118774427

Investigation of adhesion and friction of an isotropic composite pillar

Turgay Eray^*
, İlker Murat Koç
, Bilsay Sümer

^*Bu çalışma için yazışmadan sorumlu yazar

Makina Mühendisliği Bölümü

Adnan Menderes University
Hacettepe University

Araştırma sonucu: Dergiye katkı › Makale › bilirkişi

3 Atıf (Scopus)

Özet

In this work, studies are carried out on the adhesion and friction of composite pillars contact with a smooth flat surface. The composite pillar is obtained by allocating additive metal particles to a polymer matrix. The aluminum micron-sized particles are added to a polymer matrix in different mass ratios, which is aimed at an alteration of structural properties such as the stiffness and damping that is likely to permit adhesion and friction properties to be tuned accordingly. The results demonstrate that incorporating aluminum particles to a polymer matrix yields a loss of adhesion, and metal particles have a minor influence on the change of friction force for different sliding velocities.

Orijinal dil	İngilizce
Sayfa (başlangıç-bitiş)	520-531
Sayfa sayısı	12
Dergi	Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Hacim	233
Basın numarası	4
DOI'lar	https://doi.org/10.1177/1350650118774427
Yayın durumu	Yayınlandı - 1 Nis 2019

Bibliyografik not

Publisher Copyright:
© IMechE 2018.

Finansman

The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was supported by Research Fund of the Istanbul Technical University [Project Number: MGA-2017-40786].

Finansörler	Finansör numarası
Istanbul Teknik Üniversitesi	MGA-2017-40786

Belgeye Erişim

10.1177/1350650118774427

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

@article{300cd98ad16b43cf8df3384f275ada70,

title = "Investigation of adhesion and friction of an isotropic composite pillar",

abstract = "In this work, studies are carried out on the adhesion and friction of composite pillars contact with a smooth flat surface. The composite pillar is obtained by allocating additive metal particles to a polymer matrix. The aluminum micron-sized particles are added to a polymer matrix in different mass ratios, which is aimed at an alteration of structural properties such as the stiffness and damping that is likely to permit adhesion and friction properties to be tuned accordingly. The results demonstrate that incorporating aluminum particles to a polymer matrix yields a loss of adhesion, and metal particles have a minor influence on the change of friction force for different sliding velocities.",

keywords = "Adhesion, composite pillar, friction, isotropic composite, metal–polymer matrix",

author = "Turgay Eray and Ko{\c c}, \{İlker Murat\} and Bilsay S{\"u}mer",

note = "Publisher Copyright: {\textcopyright} IMechE 2018.",

year = "2019",

month = apr,

day = "1",

doi = "10.1177/1350650118774427",

language = "English",

volume = "233",

pages = "520--531",

journal = "Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology",

issn = "1350-6501",

publisher = "SAGE Publications Ltd",

number = "4",

}

TY - JOUR

T1 - Investigation of adhesion and friction of an isotropic composite pillar

AU - Eray, Turgay

AU - Koç, İlker Murat

AU - Sümer, Bilsay

N1 - Publisher Copyright: © IMechE 2018.

PY - 2019/4/1

Y1 - 2019/4/1

N2 - In this work, studies are carried out on the adhesion and friction of composite pillars contact with a smooth flat surface. The composite pillar is obtained by allocating additive metal particles to a polymer matrix. The aluminum micron-sized particles are added to a polymer matrix in different mass ratios, which is aimed at an alteration of structural properties such as the stiffness and damping that is likely to permit adhesion and friction properties to be tuned accordingly. The results demonstrate that incorporating aluminum particles to a polymer matrix yields a loss of adhesion, and metal particles have a minor influence on the change of friction force for different sliding velocities.

AB - In this work, studies are carried out on the adhesion and friction of composite pillars contact with a smooth flat surface. The composite pillar is obtained by allocating additive metal particles to a polymer matrix. The aluminum micron-sized particles are added to a polymer matrix in different mass ratios, which is aimed at an alteration of structural properties such as the stiffness and damping that is likely to permit adhesion and friction properties to be tuned accordingly. The results demonstrate that incorporating aluminum particles to a polymer matrix yields a loss of adhesion, and metal particles have a minor influence on the change of friction force for different sliding velocities.

KW - Adhesion

KW - composite pillar

KW - friction

KW - isotropic composite

KW - metal–polymer matrix

UR - https://www.scopus.com/pages/publications/85047402305

U2 - 10.1177/1350650118774427

DO - 10.1177/1350650118774427

M3 - Article

AN - SCOPUS:85047402305

SN - 1350-6501

VL - 233

SP - 520

EP - 531

JO - Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

JF - Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

IS - 4

ER -

Investigation of adhesion and friction of an isotropic composite pillar

Özet

Bibliyografik not

Finansman

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap