INFLUENCE OF TEX LINEAR DENSITY ON MECHANICAL PROPERTIES OF 3D WOVEN I-BEAM COMPOSITES

Melisa Dincer; Muhammed Ali Vural; Emir Karci; Mert Celikturk; Ibrahim Halil Sahin; Burak Yatkin; Cagin Emre; Basak Ozkendirci; Elif Ozden Yenigun; Hulya Cebeci

INFLUENCE OF TEX LINEAR DENSITY ON MECHANICAL PROPERTIES OF 3D WOVEN I-BEAM COMPOSITES

Melisa Dincer
, Muhammed Ali Vural
, Emir Karci
, Mert Celikturk
, Ibrahim Halil Sahin
, Burak Yatkin
, Cagin Emre
, Basak Ozkendirci
, Elif Ozden Yenigun
, Hulya Cebeci

Istanbul Technical University
Dogus University
Royal College of Art

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

Özet

In heterogeneous structures such as composites, load transfer is one of the most critical issues that need to be improved where poor interphase between the fiber and matrix is observed. Moreover, the weak interface between the composite plies also induces delamination behavior as a dominant failure mechanism. An innovative approach, 3D weaving, is used to eliminate delamination by improving the toughness of out-of-plane yarns in 3D woven fabrics without secondary processing required. In this study, 3D rectangular spacer fabrics were woven from E-glass fibers (GFs) with 600 and 1200 TEX linear densities at the same warp and weft densities Then, 3D composites were fabricated by vacuum infusion process (VIP) coupled with a custom-designed 3D molding. Depending on TEX, void content, fiber volume fraction, mass, and crimp values change and the effect on the specific flexural strength of I-beams has been investigated.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	Materials
Editörler	Anastasios P. Vassilopoulos, Veronique Michaud
Yayınlayan	Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL)
Sayfalar	271-278
Sayfa sayısı	8
ISBN (Elektronik)	9782970161400
Yayın durumu	Yayınlandı - 2022
Etkinlik	20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022 - Lausanne, Switzerland Süre: 26 Haz 2022 → 30 Haz 2022

Yayın serisi

Adı	ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability
Hacim	1

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022
Ülke/Bölge	Switzerland
Şehir	Lausanne
Periyot	26/06/22 → 30/06/22

Bibliyografik not

Publisher Copyright:
© 2022 Dincer et al.

Finansman

This study was funded by the Scientific and Technological Research Council of Turkey (TUBITAK: project number 218M703 (218M704)) 1003 Primary Subjects R&D Funding Program. The authors would also like to thank to the conference funding for Ms. Melisa Dincer provided by the TUBITAK 2224-A Support Program for Participation in Abroad Scientific Events.

Finansörler	Finansör numarası
Türkiye Bilimsel ve Teknolojik Araştırma Kurumu	218M703, 218M704

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Dincer, M., Vural, M. A., Karci, E., Celikturk, M., Sahin, I. H., Yatkin, B., Emre, C., Ozkendirci, B., Ozden Yenigun, E., & Cebeci, H. (2022). INFLUENCE OF TEX LINEAR DENSITY ON MECHANICAL PROPERTIES OF 3D WOVEN I-BEAM COMPOSITES. In A. P. Vassilopoulos, & V. Michaud (Eds.), Materials (pp. 271-278). (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; Hac. 1). Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL).

Dincer, Melisa ; Vural, Muhammed Ali ; Karci, Emir et al. / INFLUENCE OF TEX LINEAR DENSITY ON MECHANICAL PROPERTIES OF 3D WOVEN I-BEAM COMPOSITES. Materials. editör / Anastasios P. Vassilopoulos ; Veronique Michaud. Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL), 2022. pp. 271-278 (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability).

@inproceedings{7672106ff2d14a428e48da868579a9a4,

title = "INFLUENCE OF TEX LINEAR DENSITY ON MECHANICAL PROPERTIES OF 3D WOVEN I-BEAM COMPOSITES",

abstract = "In heterogeneous structures such as composites, load transfer is one of the most critical issues that need to be improved where poor interphase between the fiber and matrix is observed. Moreover, the weak interface between the composite plies also induces delamination behavior as a dominant failure mechanism. An innovative approach, 3D weaving, is used to eliminate delamination by improving the toughness of out-of-plane yarns in 3D woven fabrics without secondary processing required. In this study, 3D rectangular spacer fabrics were woven from E-glass fibers (GFs) with 600 and 1200 TEX linear densities at the same warp and weft densities Then, 3D composites were fabricated by vacuum infusion process (VIP) coupled with a custom-designed 3D molding. Depending on TEX, void content, fiber volume fraction, mass, and crimp values change and the effect on the specific flexural strength of I-beams has been investigated.",

keywords = "3D weaving, composite quality, flexural strength, structural composite, woven preform",

author = "Melisa Dincer and Vural, \{Muhammed Ali\} and Emir Karci and Mert Celikturk and Sahin, \{Ibrahim Halil\} and Burak Yatkin and Cagin Emre and Basak Ozkendirci and \{Ozden Yenigun\}, Elif and Hulya Cebeci",

note = "Publisher Copyright: {\textcopyright} 2022 Dincer et al.; 20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022 ; Conference date: 26-06-2022 Through 30-06-2022",

year = "2022",

language = "English",

series = "ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability",

publisher = "Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL)",

pages = "271--278",

editor = "Vassilopoulos, \{Anastasios P.\} and Veronique Michaud",

booktitle = "Materials",

}

Dincer, M, Vural, MA, Karci, E, Celikturk, M, Sahin, IH, Yatkin, B, Emre, C, Ozkendirci, B, Ozden Yenigun, E & Cebeci, H 2022, INFLUENCE OF TEX LINEAR DENSITY ON MECHANICAL PROPERTIES OF 3D WOVEN I-BEAM COMPOSITES. in AP Vassilopoulos & V Michaud (eds), Materials. ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability, hac. 1, Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL), pp. 271-278, 20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022, Lausanne, Switzerland, 26/06/22.

INFLUENCE OF TEX LINEAR DENSITY ON MECHANICAL PROPERTIES OF 3D WOVEN I-BEAM COMPOSITES. / Dincer, Melisa; Vural, Muhammed Ali; Karci, Emir et al.
Materials. ed. / Anastasios P. Vassilopoulos; Veronique Michaud. Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL), 2022. p. 271-278 (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; Hac. 1).

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

TY - GEN

T1 - INFLUENCE OF TEX LINEAR DENSITY ON MECHANICAL PROPERTIES OF 3D WOVEN I-BEAM COMPOSITES

AU - Dincer, Melisa

AU - Vural, Muhammed Ali

AU - Karci, Emir

AU - Celikturk, Mert

AU - Sahin, Ibrahim Halil

AU - Yatkin, Burak

AU - Emre, Cagin

AU - Ozkendirci, Basak

AU - Ozden Yenigun, Elif

AU - Cebeci, Hulya

PY - 2022

Y1 - 2022

N2 - In heterogeneous structures such as composites, load transfer is one of the most critical issues that need to be improved where poor interphase between the fiber and matrix is observed. Moreover, the weak interface between the composite plies also induces delamination behavior as a dominant failure mechanism. An innovative approach, 3D weaving, is used to eliminate delamination by improving the toughness of out-of-plane yarns in 3D woven fabrics without secondary processing required. In this study, 3D rectangular spacer fabrics were woven from E-glass fibers (GFs) with 600 and 1200 TEX linear densities at the same warp and weft densities Then, 3D composites were fabricated by vacuum infusion process (VIP) coupled with a custom-designed 3D molding. Depending on TEX, void content, fiber volume fraction, mass, and crimp values change and the effect on the specific flexural strength of I-beams has been investigated.

AB - In heterogeneous structures such as composites, load transfer is one of the most critical issues that need to be improved where poor interphase between the fiber and matrix is observed. Moreover, the weak interface between the composite plies also induces delamination behavior as a dominant failure mechanism. An innovative approach, 3D weaving, is used to eliminate delamination by improving the toughness of out-of-plane yarns in 3D woven fabrics without secondary processing required. In this study, 3D rectangular spacer fabrics were woven from E-glass fibers (GFs) with 600 and 1200 TEX linear densities at the same warp and weft densities Then, 3D composites were fabricated by vacuum infusion process (VIP) coupled with a custom-designed 3D molding. Depending on TEX, void content, fiber volume fraction, mass, and crimp values change and the effect on the specific flexural strength of I-beams has been investigated.

KW - 3D weaving

KW - composite quality

KW - flexural strength

KW - structural composite

KW - woven preform

UR - https://www.scopus.com/pages/publications/85149167740

M3 - Conference contribution

AN - SCOPUS:85149167740

T3 - ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability

SP - 271

EP - 278

BT - Materials

A2 - Vassilopoulos, Anastasios P.

A2 - Michaud, Veronique

PB - Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL)

T2 - 20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022

Y2 - 26 June 2022 through 30 June 2022

ER -

Dincer M, Vural MA, Karci E, Celikturk M, Sahin IH, Yatkin B et al. INFLUENCE OF TEX LINEAR DENSITY ON MECHANICAL PROPERTIES OF 3D WOVEN I-BEAM COMPOSITES. In Vassilopoulos AP, Michaud V, editörler, Materials. Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL). 2022. p. 271-278. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability).

INFLUENCE OF TEX LINEAR DENSITY ON MECHANICAL PROPERTIES OF 3D WOVEN I-BEAM COMPOSITES

Özet

Yayın serisi

???event.eventtypes.event.conference???

Bibliyografik not

Finansman

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap