Influence of SiC addition on tribological properties of SiAlON

Awadesh Kumar Mallik; K. Madhav Reddy; Nurcan Calis Acikbas; Ferhat Kara; Hasan Mandal; Debabrata Basu; Bikramjit Basu

doi:10.1016/j.ceramint.2011.03.055

Influence of SiC addition on tribological properties of SiAlON

Awadesh Kumar Mallik
, K. Madhav Reddy
, Nurcan Calis Acikbas
, Ferhat Kara
, Hasan Mandal
, Debabrata Basu
, Bikramjit Basu^*

^*Bu çalışma için yazışmadan sorumlu yazar

CSIR - Central Glass Ceramic Research Institute
Indian Institute of Technology Kanpur
Bilecik Seyh Edebali University
Anadolu University
Sabanci University

Araştırma sonucu: Dergiye katkı › Makale › bilirkişi

13 Atıf (Scopus)

Özet

The tribological properties of gas pressure sintered SiAlON and its composite with 18 wt% silicon carbide (SiC) against two different mating materials, i.e., alumina and SiAlON are evaluated. SiAlON and SiAlON-18%SiC composite ceramics were prepared by pressure less sintering and gas pressure sintering. Fretting wear tests were carried out under dry unlubricated ambient conditions (room temperature 23-25 °C; relative humidity 50-55%) with a load of 8 N for 45,000 cycles. Friction and wear properties of SiAlON-SiC proved better than the monolithic SiAlON. The formation of silica roll like structure on the composite worn surface was observed.

Orijinal dil	İngilizce
Sayfa (başlangıç-bitiş)	2495-2504
Sayfa sayısı	10
Dergi	Ceramics International
Hacim	37
Basın numarası	7
DOI'lar	https://doi.org/10.1016/j.ceramint.2011.03.055
Yayın durumu	Yayınlandı - Eyl 2011
Harici olarak yayınlandı	Evet

Belgeye Erişim

10.1016/j.ceramint.2011.03.055

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

@article{8437223e7c614dacab118c0cfb11b566,

title = "Influence of SiC addition on tribological properties of SiAlON",

abstract = "The tribological properties of gas pressure sintered SiAlON and its composite with 18 wt\% silicon carbide (SiC) against two different mating materials, i.e., alumina and SiAlON are evaluated. SiAlON and SiAlON-18\%SiC composite ceramics were prepared by pressure less sintering and gas pressure sintering. Fretting wear tests were carried out under dry unlubricated ambient conditions (room temperature 23-25 °C; relative humidity 50-55\%) with a load of 8 N for 45,000 cycles. Friction and wear properties of SiAlON-SiC proved better than the monolithic SiAlON. The formation of silica roll like structure on the composite worn surface was observed.",

keywords = "A. Sintering, Hertzian contact pressures, SiAlON and SiAlON-SiC composite, Silica roll, Tribology",

author = "Mallik, \{Awadesh Kumar\} and Reddy, \{K. Madhav\} and Acikbas, \{Nurcan Calis\} and Ferhat Kara and Hasan Mandal and Debabrata Basu and Bikramjit Basu",

year = "2011",

month = sep,

doi = "10.1016/j.ceramint.2011.03.055",

language = "English",

volume = "37",

pages = "2495--2504",

journal = "Ceramics International",

issn = "0272-8842",

number = "7",

}

TY - JOUR

T1 - Influence of SiC addition on tribological properties of SiAlON

AU - Mallik, Awadesh Kumar

AU - Reddy, K. Madhav

AU - Acikbas, Nurcan Calis

AU - Kara, Ferhat

AU - Mandal, Hasan

AU - Basu, Debabrata

AU - Basu, Bikramjit

PY - 2011/9

Y1 - 2011/9

N2 - The tribological properties of gas pressure sintered SiAlON and its composite with 18 wt% silicon carbide (SiC) against two different mating materials, i.e., alumina and SiAlON are evaluated. SiAlON and SiAlON-18%SiC composite ceramics were prepared by pressure less sintering and gas pressure sintering. Fretting wear tests were carried out under dry unlubricated ambient conditions (room temperature 23-25 °C; relative humidity 50-55%) with a load of 8 N for 45,000 cycles. Friction and wear properties of SiAlON-SiC proved better than the monolithic SiAlON. The formation of silica roll like structure on the composite worn surface was observed.

AB - The tribological properties of gas pressure sintered SiAlON and its composite with 18 wt% silicon carbide (SiC) against two different mating materials, i.e., alumina and SiAlON are evaluated. SiAlON and SiAlON-18%SiC composite ceramics were prepared by pressure less sintering and gas pressure sintering. Fretting wear tests were carried out under dry unlubricated ambient conditions (room temperature 23-25 °C; relative humidity 50-55%) with a load of 8 N for 45,000 cycles. Friction and wear properties of SiAlON-SiC proved better than the monolithic SiAlON. The formation of silica roll like structure on the composite worn surface was observed.

KW - A. Sintering

KW - Hertzian contact pressures

KW - SiAlON and SiAlON-SiC composite

KW - Silica roll

KW - Tribology

UR - https://www.scopus.com/pages/publications/79960338871

U2 - 10.1016/j.ceramint.2011.03.055

DO - 10.1016/j.ceramint.2011.03.055

M3 - Article

AN - SCOPUS:79960338871

SN - 0272-8842

VL - 37

SP - 2495

EP - 2504

JO - Ceramics International

JF - Ceramics International

IS - 7

ER -

Influence of SiC addition on tribological properties of SiAlON

Özet

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap