Improvement of mechanical strength of iron ore pellets using raw and activated bentonites as binders

Araştırma sonucu: Dergiye katkıMakalebilirkişi

22 Atıf (Scopus)

Özet

In this study, sodium, calcium, and mixed bentonite samples were used as binders in the pelletizing fine iron ore concentrate obtained from the Divrigi Iron Ore Concentration Plant in Turkey. In the pelletizing tests, sodium bentonite sample was used as received and after upgrading process. Additionally, the calcium bentonite sample required activation by sodium bicarbonate while the mixed bentonites sample was used untreated and as well as activated. The pellets produced were tested for compressive strengths, drop number, and porosity in order to characterize the pellets. The results showed that untreated and upgraded sodium bentonite samples provided relatively stronger pellets compared to calcium and the mixed type bentonite samples needed activation with sodium bicarbonate to increase the strength of the pellets. Based on the results of the drop number, compressive strengths, and porosity, it is possible to make pellets which meet the standards by adequate addition of type and amount of bentonite.

Orijinal dilİngilizce
Sayfa (başlangıç-bitiş)23-36
Sayfa sayısı14
DergiPhysicochemical Problems of Mineral Processing
Hacim51
Basın numarası1
DOI'lar
Yayın durumuYayınlandı - 2015

Parmak izi

Improvement of mechanical strength of iron ore pellets using raw and activated bentonites as binders' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

Alıntı Yap