Hydrophobicity Loss of HTV Silicone Rubbers with different ATH Filler Types under AC Corona Discharges

Tugrul Akkoyun; Halil Ibrahim Uckol; Taylan Özgür Bilgiç; Suat Ilhan

doi:10.23919/ELECO54474.2021.9677706

Hydrophobicity Loss of HTV Silicone Rubbers with different ATH Filler Types under AC Corona Discharges

Tugrul Akkoyun
, Halil Ibrahim Uckol
, Taylan Özgür Bilgiç
, Suat Ilhan

Elektrik Mühendisliği Bölümü

Istanbul Technical University

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

4 Atıf (Scopus)

Özet

This paper presents a comparative evaluation of the hydrophobicity performances of high-temperature vulcanizing (HTV) silicone rubber samples having different filler types and filler concentrations. Four different alumina trihydrate (ATH) filler types and three different filler ratios (10, 30, and 50 wt%) are considered. With the base HTV, a total of 13 different samples is exposed to AC corona discharges for two hours to assess the hydrophobicity performance of the samples. For each sample type, four test specimens are used to take more robust results. At specific time intervals, the contact angles of the samples are measured in three different locations. The results show that the specimen with 50 wt% of the precipitated ATH filler has the best performance in terms of hydrophobicity loss under AC corona discharges.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021
Yayınlayan	Institute of Electrical and Electronics Engineers Inc.
Sayfalar	134-137
Sayfa sayısı	4
ISBN (Elektronik)	9786050114379
DOI'lar	https://doi.org/10.23919/ELECO54474.2021.9677706
Yayın durumu	Yayınlandı - 2021
Etkinlik	13th International Conference on Electrical and Electronics Engineering, ELECO 2021 - Virtual, Bursa, Turkey Süre: 25 Kas 2021 → 27 Kas 2021

Yayın serisi

Adı	2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	13th International Conference on Electrical and Electronics Engineering, ELECO 2021
Ülke/Bölge	Turkey
Şehir	Virtual, Bursa
Periyot	25/11/21 → 27/11/21

Bibliyografik not

Publisher Copyright:
© 2021 Chamber of Turkish Electrical Engineers.

Finansman

This work was supported as a part of "117E276 Determination of optimum filler composition to extend the lifetime of polymeric insulators and lifetime estimation" project under the framework of the 1001 Project organized by the Scientific and Technological Research Council of Turkey (TUBITAK).

Finansörler
TUBITAK
Türkiye Bilimsel ve Teknolojik Araştirma Kurumu

Belgeye Erişim

10.23919/ELECO54474.2021.9677706

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Akkoyun, T., Uckol, H. I., Bilgiç, T. Ö., & Ilhan, S. (2021). Hydrophobicity Loss of HTV Silicone Rubbers with different ATH Filler Types under AC Corona Discharges. In 2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021 (pp. 134-137). (2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.23919/ELECO54474.2021.9677706

Akkoyun, Tugrul ; Uckol, Halil Ibrahim ; Bilgiç, Taylan Özgür et al. / Hydrophobicity Loss of HTV Silicone Rubbers with different ATH Filler Types under AC Corona Discharges. 2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021. Institute of Electrical and Electronics Engineers Inc., 2021. pp. 134-137 (2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021).

@inproceedings{34268258911e48f5ba56ae565ec8810b,

title = "Hydrophobicity Loss of HTV Silicone Rubbers with different ATH Filler Types under AC Corona Discharges",

abstract = "This paper presents a comparative evaluation of the hydrophobicity performances of high-temperature vulcanizing (HTV) silicone rubber samples having different filler types and filler concentrations. Four different alumina trihydrate (ATH) filler types and three different filler ratios (10, 30, and 50 wt\%) are considered. With the base HTV, a total of 13 different samples is exposed to AC corona discharges for two hours to assess the hydrophobicity performance of the samples. For each sample type, four test specimens are used to take more robust results. At specific time intervals, the contact angles of the samples are measured in three different locations. The results show that the specimen with 50 wt\% of the precipitated ATH filler has the best performance in terms of hydrophobicity loss under AC corona discharges.",

author = "Tugrul Akkoyun and Uckol, \{Halil Ibrahim\} and Bilgi{\c c}, \{Taylan {\"O}zg{\"u}r\} and Suat Ilhan",

note = "Publisher Copyright: {\textcopyright} 2021 Chamber of Turkish Electrical Engineers.; 13th International Conference on Electrical and Electronics Engineering, ELECO 2021 ; Conference date: 25-11-2021 Through 27-11-2021",

year = "2021",

doi = "10.23919/ELECO54474.2021.9677706",

language = "English",

series = "2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "134--137",

booktitle = "2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021",

address = "United States",

}

Akkoyun, T, Uckol, HI, Bilgiç, TÖ & Ilhan, S 2021, Hydrophobicity Loss of HTV Silicone Rubbers with different ATH Filler Types under AC Corona Discharges. in 2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021. 2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021, Institute of Electrical and Electronics Engineers Inc., pp. 134-137, 13th International Conference on Electrical and Electronics Engineering, ELECO 2021, Virtual, Bursa, Turkey, 25/11/21. https://doi.org/10.23919/ELECO54474.2021.9677706

Hydrophobicity Loss of HTV Silicone Rubbers with different ATH Filler Types under AC Corona Discharges. / Akkoyun, Tugrul; Uckol, Halil Ibrahim; Bilgiç, Taylan Özgür et al.
2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021. Institute of Electrical and Electronics Engineers Inc., 2021. p. 134-137 (2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021).

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

TY - GEN

T1 - Hydrophobicity Loss of HTV Silicone Rubbers with different ATH Filler Types under AC Corona Discharges

AU - Akkoyun, Tugrul

AU - Uckol, Halil Ibrahim

AU - Bilgiç, Taylan Özgür

AU - Ilhan, Suat

PY - 2021

Y1 - 2021

N2 - This paper presents a comparative evaluation of the hydrophobicity performances of high-temperature vulcanizing (HTV) silicone rubber samples having different filler types and filler concentrations. Four different alumina trihydrate (ATH) filler types and three different filler ratios (10, 30, and 50 wt%) are considered. With the base HTV, a total of 13 different samples is exposed to AC corona discharges for two hours to assess the hydrophobicity performance of the samples. For each sample type, four test specimens are used to take more robust results. At specific time intervals, the contact angles of the samples are measured in three different locations. The results show that the specimen with 50 wt% of the precipitated ATH filler has the best performance in terms of hydrophobicity loss under AC corona discharges.

AB - This paper presents a comparative evaluation of the hydrophobicity performances of high-temperature vulcanizing (HTV) silicone rubber samples having different filler types and filler concentrations. Four different alumina trihydrate (ATH) filler types and three different filler ratios (10, 30, and 50 wt%) are considered. With the base HTV, a total of 13 different samples is exposed to AC corona discharges for two hours to assess the hydrophobicity performance of the samples. For each sample type, four test specimens are used to take more robust results. At specific time intervals, the contact angles of the samples are measured in three different locations. The results show that the specimen with 50 wt% of the precipitated ATH filler has the best performance in terms of hydrophobicity loss under AC corona discharges.

UR - https://www.scopus.com/pages/publications/85125288538

U2 - 10.23919/ELECO54474.2021.9677706

DO - 10.23919/ELECO54474.2021.9677706

M3 - Conference contribution

AN - SCOPUS:85125288538

T3 - 2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021

SP - 134

EP - 137

BT - 2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 13th International Conference on Electrical and Electronics Engineering, ELECO 2021

Y2 - 25 November 2021 through 27 November 2021

ER -

Akkoyun T, Uckol HI, Bilgiç TÖ , Ilhan S. Hydrophobicity Loss of HTV Silicone Rubbers with different ATH Filler Types under AC Corona Discharges. In 2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021. Institute of Electrical and Electronics Engineers Inc. 2021. p. 134-137. (2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021). doi: 10.23919/ELECO54474.2021.9677706

Hydrophobicity Loss of HTV Silicone Rubbers with different ATH Filler Types under AC Corona Discharges

Özet

Yayın serisi

???event.eventtypes.event.conference???

Bibliyografik not

Finansman

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap