Finite element modelling and analysis of simple lap joints

Ilker Uysal; Murat Süer; Ibrahim Ozkol

doi:10.1109/RAST.2011.5966925

Finite element modelling and analysis of simple lap joints

Ilker Uysal^*
, Murat Süer
, Ibrahim Ozkol

^*Bu çalışma için yazışmadan sorumlu yazar

Faculty of Aeronautics and Astronautics

Araştırma çıktısı: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › Hakem

5 Atıf (Scopus)

Özet

In this paper, in order to investigate simple lap joint's behavior, finite element models (FEM) were examined by using the simple plate-fastener system. The essence of this paper is to explore the simplest way of the finite element modeling of the simple lap joint. For that reason, various finite element models are created and analyzed with MSC. Nastran-Patran package software. Results are compared with previous studies [1]. Although, using 3-dimentional elements in FEM modeling result in more accurate output, it is not in the scope of this study, because of 3-dimentional modeling is complicated and takes much more time [2]. In the developed models plates are represented by shell elements, while the fastener nut is modeled by using rigid elements and three different type fastener shanks are modeled by rigid, beam and cbush elements [3].

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	RAST 2011 - Proceedings of 5th International Conference on Recent Advances in Space Technologies
Sayfalar	68-72
Sayfa sayısı	5
DOI'lar	https://doi.org/10.1109/RAST.2011.5966925
Yayın durumu	Yayınlandı - 2011
Harici olarak yayınlandı	Evet
Etkinlik	5th International Conference on Recent Advances in Space Technologies, RAST 2011 - Istanbul, Türkiye Süre: 9 Haz 2011 → 11 Haz 2011

Yayın serisi

Adı	RAST 2011 - Proceedings of 5th International Conference on Recent Advances in Space Technologies

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	5th International Conference on Recent Advances in Space Technologies, RAST 2011
Ülke/Bölge	Türkiye
Şehir	Istanbul
Periyot	9/06/11 → 11/06/11

Belgeye Erişim

10.1109/RAST.2011.5966925

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Uysal, I., Süer, M., & Ozkol, I. (2011). Finite element modelling and analysis of simple lap joints. In RAST 2011 - Proceedings of 5th International Conference on Recent Advances in Space Technologies (pp. 68-72). Makale 5966925 (RAST 2011 - Proceedings of 5th International Conference on Recent Advances in Space Technologies). https://doi.org/10.1109/RAST.2011.5966925

@inproceedings{2a6e5cb5d6af4786a43f55a3fe25d95a,

title = "Finite element modelling and analysis of simple lap joints",

abstract = "In this paper, in order to investigate simple lap joint's behavior, finite element models (FEM) were examined by using the simple plate-fastener system. The essence of this paper is to explore the simplest way of the finite element modeling of the simple lap joint. For that reason, various finite element models are created and analyzed with MSC. Nastran-Patran package software. Results are compared with previous studies [1]. Although, using 3-dimentional elements in FEM modeling result in more accurate output, it is not in the scope of this study, because of 3-dimentional modeling is complicated and takes much more time [2]. In the developed models plates are represented by shell elements, while the fastener nut is modeled by using rigid elements and three different type fastener shanks are modeled by rigid, beam and cbush elements [3].",

author = "Ilker Uysal and Murat S{\"u}er and Ibrahim Ozkol",

year = "2011",

doi = "10.1109/RAST.2011.5966925",

language = "English",

isbn = "9781424496143",

series = "RAST 2011 - Proceedings of 5th International Conference on Recent Advances in Space Technologies",

pages = "68--72",

booktitle = "RAST 2011 - Proceedings of 5th International Conference on Recent Advances in Space Technologies",

note = "5th International Conference on Recent Advances in Space Technologies, RAST 2011 ; Conference date: 09-06-2011 Through 11-06-2011",

}

Uysal, I, Süer, M & Ozkol, I 2011, Finite element modelling and analysis of simple lap joints. in RAST 2011 - Proceedings of 5th International Conference on Recent Advances in Space Technologies., 5966925, RAST 2011 - Proceedings of 5th International Conference on Recent Advances in Space Technologies, pp. 68-72, 5th International Conference on Recent Advances in Space Technologies, RAST 2011, Istanbul, Türkiye, 9/06/11. https://doi.org/10.1109/RAST.2011.5966925

Finite element modelling and analysis of simple lap joints. / Uysal, Ilker; Süer, Murat; Ozkol, Ibrahim.
RAST 2011 - Proceedings of 5th International Conference on Recent Advances in Space Technologies. 2011. p. 68-72 5966925 (RAST 2011 - Proceedings of 5th International Conference on Recent Advances in Space Technologies).

Araştırma çıktısı: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › Hakem

TY - GEN

T1 - Finite element modelling and analysis of simple lap joints

AU - Uysal, Ilker

AU - Süer, Murat

AU - Ozkol, Ibrahim

PY - 2011

Y1 - 2011

N2 - In this paper, in order to investigate simple lap joint's behavior, finite element models (FEM) were examined by using the simple plate-fastener system. The essence of this paper is to explore the simplest way of the finite element modeling of the simple lap joint. For that reason, various finite element models are created and analyzed with MSC. Nastran-Patran package software. Results are compared with previous studies [1]. Although, using 3-dimentional elements in FEM modeling result in more accurate output, it is not in the scope of this study, because of 3-dimentional modeling is complicated and takes much more time [2]. In the developed models plates are represented by shell elements, while the fastener nut is modeled by using rigid elements and three different type fastener shanks are modeled by rigid, beam and cbush elements [3].

AB - In this paper, in order to investigate simple lap joint's behavior, finite element models (FEM) were examined by using the simple plate-fastener system. The essence of this paper is to explore the simplest way of the finite element modeling of the simple lap joint. For that reason, various finite element models are created and analyzed with MSC. Nastran-Patran package software. Results are compared with previous studies [1]. Although, using 3-dimentional elements in FEM modeling result in more accurate output, it is not in the scope of this study, because of 3-dimentional modeling is complicated and takes much more time [2]. In the developed models plates are represented by shell elements, while the fastener nut is modeled by using rigid elements and three different type fastener shanks are modeled by rigid, beam and cbush elements [3].

UR - https://www.scopus.com/pages/publications/80052120714

U2 - 10.1109/RAST.2011.5966925

DO - 10.1109/RAST.2011.5966925

M3 - Conference contribution

AN - SCOPUS:80052120714

SN - 9781424496143

T3 - RAST 2011 - Proceedings of 5th International Conference on Recent Advances in Space Technologies

SP - 68

EP - 72

BT - RAST 2011 - Proceedings of 5th International Conference on Recent Advances in Space Technologies

T2 - 5th International Conference on Recent Advances in Space Technologies, RAST 2011

Y2 - 9 June 2011 through 11 June 2011

ER -

Finite element modelling and analysis of simple lap joints

Özet

Yayın serisi

???event.eventtypes.event.conference???

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap