Ana gezinime geç Aramaya geç Ana içeriğe geç

Farklı sargı yapılarının tekerlek içi fırçasız doğru akım motorlarının verimi üzerindeki etkilerinin incelenmesi

  • Ali Sinan Çabuk*
  • , Safak Sağlam
  • , Özgür Üstün
  • *Bu çalışma için yazışmadan sorumlu yazar
  • Marmara University
  • Mekatro Mechatronic Systems R and D Co.

Araştırma çıktısı: Dergi yayını › Makale › Hakemli

9 Atıf (Scopus)

Özet

Electric machine windings are the essential elements which affect machine performance and efficiency substantially. Two main criteria are considered during winding design: impact on performance and manufacturing costs. In this study, different winding structure combinations are investigated by implementing in an in-wheel motor structure. The motor is a surface mounted permanent magnet BLDC motor which is intended to use in light electric vehicles. According to the design data, the obtained optimum design is manufactured and tested. Accurately captured test results are compared to the calculated values. The direct drive in-wheel BLDC motor used in this study has the rated values of 2.5 kW output power, 900 min-1 shaft speed and 150 V terminal voltage. A Finite Element Method (FEM) based software is used for the design study, that is called ANSYS Electronics Desktop. Effects of different winding topologies are studied by keeping the motor structure and materials unchanged. The validation of the optimized design is realized by conducting the performance experiments. The study shows that the winding topology has a great importance especially for in-wheel motors.

Tercüme edilen katkı başlığıInvestigation on efficiency of in-wheel BLDC motors for different winding structures
Orijinal dilTürkçe
Sayfa (başlangıç-bitiş)1975-1985
Sayfa sayısı11
DergiJournal of the Faculty of Engineering and Architecture of Gazi University
Hacim34
Basın numarası4
DOI'lar
Yayın durumuYayınlandı - 2019

Bibliyografik not

Publisher Copyright:
© 2019 Gazi Universitesi Muhendislik-Mimarlik. All rights reserved.

Finansman

This project is supported by the Marmara University Scientific Research Committee. Project No: FEN-C-DRP-110412-0096

FinansörlerFinansör numarası
Marmara ÜniversitesiFEN-C-DRP-110412-0096

    BM SKH

    Bu sonuç, aşağıdaki Sürdürülebilir Kalkınma Hedefine/Hedeflerine katkıda bulunur

    1. SKH 9 - Sanayi, Yenilikçilik ve Altyapı
      SKH 9 Sanayi, Yenilikçilik ve Altyapı

    Keywords

    • Efficiency
    • In-Wheel BLDC motor
    • Light electric vehicle
    • Winding shape

    Parmak izi

    Farklı sargı yapılarının tekerlek içi fırçasız doğru akım motorlarının verimi üzerindeki etkilerinin incelenmesi' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

    Alıntı Yap