Fabrication and characterization of polysulfone reinforced hollow fibre membrane

Turker Turken; Reyhan Sengur-Tasdemir; Gulsum Melike Urper-Bayram; Oguz Gunes; Esra Ates-Genceli; Volodymyr V. Tarabara; Ismail Koyuncu

doi:10.1080/09593330.2019.1710571

Fabrication and characterization of polysulfone reinforced hollow fibre membrane

Turker Turken
, Reyhan Sengur-Tasdemir
, Gulsum Melike Urper-Bayram
, Oguz Gunes
, Esra Ates-Genceli
, Volodymyr V. Tarabara
, Ismail Koyuncu^*

^*Bu çalışma için yazışmadan sorumlu yazar

Çevre Mühendisliği Bölümü

Dincer Topacık National Research Center on Membrane Technologies (MEM-TEK)
Istanbul Technical University
Michigan State University

Araştırma sonucu: Dergiye katkı › Makale › bilirkişi

10 Atıf (Scopus)

Özet

In this study, reinforced hollow fibre membranes were fabricated using different molecular weights of polyvinylidene prolidone (PVP Mw: 10, 40 and 360 kDa) and different take-up speeds (1, 2, 2.6 and 3.5 m/min). Prepared reinforced hollow fibre membranes were characterized in terms of permeability; surface morphology and hydrophilicity; pore size distribution; bovine serum albumin (BSA) rejection and flux recovery ratio. Optimum permeability and BSA rejection were obtained when PVP molecular weight was 40 kDa. After PVP molecular weight determination, advancing speed was changed and it was seen that increasing advancing speed ended up with decreased membrane wall thickness; however, decreased wall thickness increased the probability of irreversible fouling.

Orijinal dil	İngilizce
Sayfa (başlangıç-bitiş)	2690-2699
Sayfa sayısı	10
Dergi	Environmental Technology (United Kingdom)
Hacim	42
Basın numarası	17
DOI'lar	https://doi.org/10.1080/09593330.2019.1710571
Yayın durumu	Yayınlandı - 2021

Bibliyografik not

Publisher Copyright:
© 2020 Informa UK Limited, trading as Taylor & Francis Group.

Finansman

The authors are grateful to TUBITAK (Türkiye Bilimsel ve Teknolojik Araştirma Kurumu) (The Scientific and Technological Research Council of Turkey) for their financial support under grant number 113Y359. The collaboration between ITU and MSU teams was supported in part by the U. S. National Science Foundation Partnerships for International Research and Education programme [grant number 1243433].

Finansörler	Finansör numarası
U. S. National Science Foundation Partnerships for International Research and Education programme	1243433
International Technological University
Türkiye Bilimsel ve Teknolojik Araştirma Kurumu	113Y359
Midlands State University

Belgeye Erişim

10.1080/09593330.2019.1710571

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

@article{dff7d669346d4a71b21d4dedbe5bd228,

title = "Fabrication and characterization of polysulfone reinforced hollow fibre membrane",

abstract = "In this study, reinforced hollow fibre membranes were fabricated using different molecular weights of polyvinylidene prolidone (PVP Mw: 10, 40 and 360 kDa) and different take-up speeds (1, 2, 2.6 and 3.5 m/min). Prepared reinforced hollow fibre membranes were characterized in terms of permeability; surface morphology and hydrophilicity; pore size distribution; bovine serum albumin (BSA) rejection and flux recovery ratio. Optimum permeability and BSA rejection were obtained when PVP molecular weight was 40 kDa. After PVP molecular weight determination, advancing speed was changed and it was seen that increasing advancing speed ended up with decreased membrane wall thickness; however, decreased wall thickness increased the probability of irreversible fouling.",

keywords = "hollow fibre, membrane fabrication, polyvinylidene prolidone, Reinforced",

author = "Turker Turken and Reyhan Sengur-Tasdemir and Urper-Bayram, \{Gulsum Melike\} and Oguz Gunes and Esra Ates-Genceli and Tarabara, \{Volodymyr V.\} and Ismail Koyuncu",

note = "Publisher Copyright: {\textcopyright} 2020 Informa UK Limited, trading as Taylor \& Francis Group.",

year = "2021",

doi = "10.1080/09593330.2019.1710571",

language = "English",

volume = "42",

pages = "2690--2699",

journal = "Environmental Technology (United Kingdom)",

issn = "0959-3330",

number = "17",

}

TY - JOUR

T1 - Fabrication and characterization of polysulfone reinforced hollow fibre membrane

AU - Turken, Turker

AU - Sengur-Tasdemir, Reyhan

AU - Urper-Bayram, Gulsum Melike

AU - Gunes, Oguz

AU - Ates-Genceli, Esra

AU - Tarabara, Volodymyr V.

AU - Koyuncu, Ismail

PY - 2021

Y1 - 2021

N2 - In this study, reinforced hollow fibre membranes were fabricated using different molecular weights of polyvinylidene prolidone (PVP Mw: 10, 40 and 360 kDa) and different take-up speeds (1, 2, 2.6 and 3.5 m/min). Prepared reinforced hollow fibre membranes were characterized in terms of permeability; surface morphology and hydrophilicity; pore size distribution; bovine serum albumin (BSA) rejection and flux recovery ratio. Optimum permeability and BSA rejection were obtained when PVP molecular weight was 40 kDa. After PVP molecular weight determination, advancing speed was changed and it was seen that increasing advancing speed ended up with decreased membrane wall thickness; however, decreased wall thickness increased the probability of irreversible fouling.

AB - In this study, reinforced hollow fibre membranes were fabricated using different molecular weights of polyvinylidene prolidone (PVP Mw: 10, 40 and 360 kDa) and different take-up speeds (1, 2, 2.6 and 3.5 m/min). Prepared reinforced hollow fibre membranes were characterized in terms of permeability; surface morphology and hydrophilicity; pore size distribution; bovine serum albumin (BSA) rejection and flux recovery ratio. Optimum permeability and BSA rejection were obtained when PVP molecular weight was 40 kDa. After PVP molecular weight determination, advancing speed was changed and it was seen that increasing advancing speed ended up with decreased membrane wall thickness; however, decreased wall thickness increased the probability of irreversible fouling.

KW - hollow fibre

KW - membrane fabrication

KW - polyvinylidene prolidone

KW - Reinforced

UR - https://www.scopus.com/pages/publications/85077841815

U2 - 10.1080/09593330.2019.1710571

DO - 10.1080/09593330.2019.1710571

M3 - Article

C2 - 31884889

AN - SCOPUS:85077841815

SN - 0959-3330

VL - 42

SP - 2690

EP - 2699

JO - Environmental Technology (United Kingdom)

JF - Environmental Technology (United Kingdom)

IS - 17

ER -

Fabrication and characterization of polysulfone reinforced hollow fibre membrane

Özet

Bibliyografik not

Finansman

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap