Experimental validation of a simple system for through-the-wall inverse scattering

Ibrahim Akduman; Lorenzo Crocco; Francesco Soldovieri

doi:10.1109/LGRS.2010.2065212

Experimental validation of a simple system for through-the-wall inverse scattering

Ibrahim Akduman^*
, Lorenzo Crocco
, Francesco Soldovieri

^*Bu çalışma için yazışmadan sorumlu yazar

Elektronik ve Hab.Müh.Bölümü

National Research Council of Italy

Araştırma sonucu: Dergiye katkı › Makale › bilirkişi

18 Atıf (Scopus)

Özet

In this letter, we propose a system for through-wall imaging based on a bistatic setup and a two-step inversion procedure. Since the adopted configuration is simple and low cost but only delivers a limited amount of data, the data-processing stage is tackled in a stepwise fashion. First, the targets are detected from the estimation of the surface impedance along the wall and then the area behind the identified portion of the wall is imaged by means of a linearized microwave-tomographic algorithm. The overall device is described, and the results of a proof-of-concept experimental validation are reported.

Orijinal dil	İngilizce
Makale numarası	5570892
Sayfa (başlangıç-bitiş)	258-262
Sayfa sayısı	5
Dergi	IEEE Geoscience and Remote Sensing Letters
Hacim	8
Basın numarası	2
DOI'lar	https://doi.org/10.1109/LGRS.2010.2065212
Yayın durumu	Yayınlandı - Mar 2011

Finansman

Manuscript received June 8, 2010; revised July 13, 2010; accepted July 28, 2010. Date of publication September 13, 2010; date of current version February 25, 2011. This work was supported by the Italian National Research Council (CNR) Short Mobility Program.

Finansörler
Italian National Research Council
College of Natural Resources, University of California Berkeley

Belgeye Erişim

10.1109/LGRS.2010.2065212

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

@article{ff2d35d507774ef293d537ff4b200364,

title = "Experimental validation of a simple system for through-the-wall inverse scattering",

abstract = "In this letter, we propose a system for through-wall imaging based on a bistatic setup and a two-step inversion procedure. Since the adopted configuration is simple and low cost but only delivers a limited amount of data, the data-processing stage is tackled in a stepwise fashion. First, the targets are detected from the estimation of the surface impedance along the wall and then the area behind the identified portion of the wall is imaged by means of a linearized microwave-tomographic algorithm. The overall device is described, and the results of a proof-of-concept experimental validation are reported.",

keywords = "Electromagnetic wave scattering, inverse scattering, microwave tomography, surface impedance, through-wall imaging (TWI)",

author = "Ibrahim Akduman and Lorenzo Crocco and Francesco Soldovieri",

year = "2011",

month = mar,

doi = "10.1109/LGRS.2010.2065212",

language = "English",

volume = "8",

pages = "258--262",

journal = "IEEE Geoscience and Remote Sensing Letters",

issn = "1545-598X",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "2",

}

TY - JOUR

T1 - Experimental validation of a simple system for through-the-wall inverse scattering

AU - Akduman, Ibrahim

AU - Crocco, Lorenzo

AU - Soldovieri, Francesco

PY - 2011/3

Y1 - 2011/3

N2 - In this letter, we propose a system for through-wall imaging based on a bistatic setup and a two-step inversion procedure. Since the adopted configuration is simple and low cost but only delivers a limited amount of data, the data-processing stage is tackled in a stepwise fashion. First, the targets are detected from the estimation of the surface impedance along the wall and then the area behind the identified portion of the wall is imaged by means of a linearized microwave-tomographic algorithm. The overall device is described, and the results of a proof-of-concept experimental validation are reported.

AB - In this letter, we propose a system for through-wall imaging based on a bistatic setup and a two-step inversion procedure. Since the adopted configuration is simple and low cost but only delivers a limited amount of data, the data-processing stage is tackled in a stepwise fashion. First, the targets are detected from the estimation of the surface impedance along the wall and then the area behind the identified portion of the wall is imaged by means of a linearized microwave-tomographic algorithm. The overall device is described, and the results of a proof-of-concept experimental validation are reported.

KW - Electromagnetic wave scattering

KW - inverse scattering

KW - microwave tomography

KW - surface impedance

KW - through-wall imaging (TWI)

UR - https://www.scopus.com/pages/publications/79952042303

U2 - 10.1109/LGRS.2010.2065212

DO - 10.1109/LGRS.2010.2065212

M3 - Article

AN - SCOPUS:79952042303

SN - 1545-598X

VL - 8

SP - 258

EP - 262

JO - IEEE Geoscience and Remote Sensing Letters

JF - IEEE Geoscience and Remote Sensing Letters

IS - 2

M1 - 5570892

ER -

Experimental validation of a simple system for through-the-wall inverse scattering

Özet

Finansman

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap