Experimental investigation of the effect of dimensions on nucleate boiling heat transfer in straight tunnel–structured boiling surfaces

Ali Can Ispir*, Seyhan Uygur Onbasioglu

*Bu çalışma için yazışmadan sorumlu yazar

Araştırma sonucu: ???type-name???Makalebilirkişi

5 Atıf (Scopus)

Özet

Pool boiling experiments were carried out to investigate tunnel width, pore, and height size effects on boiling heat transfer and to determine the performance of surfaces in different ranges of heat fluxes by using distilled water under atmospheric conditions. Also, the behavior of nucleation of vapor bubbles was observed. The nine structured surfaces, which have the same fin thickness (2.0 mm) but different tunnel width and height, and pore diameter, were developed for enhancement of boiling heat transfer. Also, a structured surface having 3.0 mm tunnel width without pores was investigated to observe pore effect. In order to investigate tunnel height, four surfaces with the same pore diameter and tunnel width, but various tunnel height values, were also used. In addition, it was considered that pore structures would help for fluid transition along the channels to increase the bubble frequency (nucleation, growing and leaving periods). Although a surface whose tunnel width is 1.0 mm can be considered best due to higher heat transfer area and providing more active nucleation sites, it was observed that vapor bubbles could hardly release throughout the tunnel, especially at high heat fluxes. Even though pore size is very significant for fluid transition during boiling and pores are needed for suction-evaporation operational mode for surface structure, it was observed that pores decrease the active nucleation sites because pore internal surfaces are not suitable places for nucleation.

Orijinal dilİngilizce
Sayfa (başlangıç-bitiş)101-122
Sayfa sayısı22
DergiJournal of Enhanced Heat Transfer
Hacim27
Basın numarası2
DOI'lar
Yayın durumuYayınlandı - 2020

Bibliyografik not

Publisher Copyright:
© 2020 by Begell House, Inc.

Finansman

The study was financially supported by TUBITAK (The Scientific and Technological Research Council of Turkey) under the contract number 115M403, and ARCELIK A.S R&D Department.

FinansörlerFinansör numarası
TUBITAK
Türkiye Bilimsel ve Teknolojik Araştirma Kurumu115M403

    Parmak izi

    Experimental investigation of the effect of dimensions on nucleate boiling heat transfer in straight tunnel–structured boiling surfaces' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

    Alıntı Yap