Experimental investigation of pinned joints in NCF Glass-Fibre reinforced composite plates

Oğuzcan İnal; Akın Ataş

doi:10.17341/gazimmfd.416441

Experimental investigation of pinned joints in NCF Glass-Fibre reinforced composite plates

Oğuzcan İnal^*
, Akın Ataş

^*Bu çalışma için yazışmadan sorumlu yazar

Balikesir University

Araştırma sonucu: Dergiye katkı › Makale › bilirkişi

3 Atıf (Scopus)

Özet

In this study, mechanical behaviour of quasi-unidirectional (quasi-UD) non-crimp fabric (NCF) reinforced composite plates with pinned joints was investigated experimentally. Composite laminates with three different cross-ply and three different quasi-isotropic layups were manufactured with vacuum assisted resin transfer moulding (VARTM) method. The pin-bearing tests of the specimens were completed according to ASTM D5961 standard. Test results were compared with a different material system and joint configuration. Finally, the cross-sections of damaged areas were inspected with optical microscopy.

Orijinal dil	İngilizce
Sayfa (başlangıç-bitiş)	1445-1457
Sayfa sayısı	13
Dergi	Journal of the Faculty of Engineering and Architecture of Gazi University
Hacim	33
Basın numarası	4
DOI'lar	https://doi.org/10.17341/gazimmfd.416441
Yayın durumu	Yayınlandı - 2018
Harici olarak yayınlandı	Evet

Bibliyografik not

Publisher Copyright:
© 2018 Gazi Universitesi Muhendislik-Mimarlik. All Rights Reserved.

Belgeye Erişim

10.17341/gazimmfd.416441

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

@article{0d1671c7695845e3b62ae4d9478f0560,

title = "Experimental investigation of pinned joints in NCF Glass-Fibre reinforced composite plates",

abstract = "In this study, mechanical behaviour of quasi-unidirectional (quasi-UD) non-crimp fabric (NCF) reinforced composite plates with pinned joints was investigated experimentally. Composite laminates with three different cross-ply and three different quasi-isotropic layups were manufactured with vacuum assisted resin transfer moulding (VARTM) method. The pin-bearing tests of the specimens were completed according to ASTM D5961 standard. Test results were compared with a different material system and joint configuration. Finally, the cross-sections of damaged areas were inspected with optical microscopy.",

keywords = "Composites, Glass fiber reinforced, Micro-buckling, Non-crimp fabric, Pinned joints, Polymer composites",

author = "Oğuzcan İnal and Akın Ata{\c s}",

year = "2018",

doi = "10.17341/gazimmfd.416441",

language = "English",

volume = "33",

pages = "1445--1457",

journal = "Journal of the Faculty of Engineering and Architecture of Gazi University",

issn = "1300-1884",

publisher = "Gazi Universitesi",

number = "4",

}

TY - JOUR

T1 - Experimental investigation of pinned joints in NCF Glass-Fibre reinforced composite plates

AU - İnal, Oğuzcan

AU - Ataş, Akın

PY - 2018

Y1 - 2018

N2 - In this study, mechanical behaviour of quasi-unidirectional (quasi-UD) non-crimp fabric (NCF) reinforced composite plates with pinned joints was investigated experimentally. Composite laminates with three different cross-ply and three different quasi-isotropic layups were manufactured with vacuum assisted resin transfer moulding (VARTM) method. The pin-bearing tests of the specimens were completed according to ASTM D5961 standard. Test results were compared with a different material system and joint configuration. Finally, the cross-sections of damaged areas were inspected with optical microscopy.

AB - In this study, mechanical behaviour of quasi-unidirectional (quasi-UD) non-crimp fabric (NCF) reinforced composite plates with pinned joints was investigated experimentally. Composite laminates with three different cross-ply and three different quasi-isotropic layups were manufactured with vacuum assisted resin transfer moulding (VARTM) method. The pin-bearing tests of the specimens were completed according to ASTM D5961 standard. Test results were compared with a different material system and joint configuration. Finally, the cross-sections of damaged areas were inspected with optical microscopy.

KW - Composites

KW - Glass fiber reinforced

KW - Micro-buckling

KW - Non-crimp fabric

KW - Pinned joints

KW - Polymer composites

UR - https://www.scopus.com/pages/publications/85059588479

U2 - 10.17341/gazimmfd.416441

DO - 10.17341/gazimmfd.416441

M3 - Article

AN - SCOPUS:85059588479

SN - 1300-1884

VL - 33

SP - 1445

EP - 1457

JO - Journal of the Faculty of Engineering and Architecture of Gazi University

JF - Journal of the Faculty of Engineering and Architecture of Gazi University

IS - 4

ER -

Experimental investigation of pinned joints in NCF Glass-Fibre reinforced composite plates

Özet

Bibliyografik not

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap