Exergy analysis of laminar fluid flow in stainless steel microtubes

Nezaket Parlak*, Mesut Gür, Tahsin Engin, Hasan Küçük

*Bu çalışma için yazışmadan sorumlu yazar

Araştırma sonucu: ???type-name???Makalebilirkişi

4 Atıf (Scopus)

Özet

In the study, exergy analysis of steady laminar fluid flow in stainless steel microtubes with diameters between 103 μm and 179 μm were conducted in the adiabatic conditions experimentally. The exergy losses were obtained for deionised water flowing in rough microtubes with the surface relative roughness of 2-6%. Results indicated that the exergy loss was in a good agreement with the conventional theory and the increasing in relative roughness leads to increasing exergy loss. As Re increases, measured exergy losses were found to be significantly higher than that of the predicted values

Orijinal dilİngilizce
Sayfa (başlangıç-bitiş)472-485
Sayfa sayısı14
DergiInternational Journal of Exergy
Hacim9
Basın numarası4
DOI'lar
Yayın durumuYayınlandı - Ara 2011
Harici olarak yayınlandıEvet

Parmak izi

Exergy analysis of laminar fluid flow in stainless steel microtubes' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

Alıntı Yap