Evaluation of Surface Properties of Zinc Borate Filled HTV Silicone Rubber

Idris Ozdemir; Halil Ibrahim Uckol; Abdullah Aydogan; Gurkan Soykan; Refat A. Ghunem; Suat Ilhan

doi:10.1109/UPEC57427.2023.10294903

Evaluation of Surface Properties of Zinc Borate Filled HTV Silicone Rubber

Idris Ozdemir
, Halil Ibrahim Uckol
, Abdullah Aydogan
, Gurkan Soykan
, Refat A. Ghunem
, Suat Ilhan

Bahcesehir University
National Research Council of Canada

Araştırma çıktısı: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › Hakem

Özet

This study presents an investigation of the surface properties of high-temperature vulcanizing (HTV) silicone rubber samples filled with different percentages (5%, 10%, 15%, 20%, and 30%) of Zinc Borate (ZB) filler. Base HTV samples were the reference for the comparison. Physical analyses, including density and hardness measurements, were conducted on each sample. Moreover, dynamic drop tests (DDTs), contact angle measurements, surface roughness analysis, and scanning electron microscopy (SEM) imaging were performed to investigate the hydrophobicity characteristics of the samples. The results of these analyses indicated that an increase in the ZB filler ratio to 10 wt% resulted in a notable reduction in surface roughness, which also led to a notable increase in the surface contact angle. The DDTs revealed that an increase in the ZB filler content by 30 wt% led to an improvement in hydrophobicity performance.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	58th International Universities Power Engineering Conference, UPEC 2023
Yayınlayan	Institute of Electrical and Electronics Engineers Inc.
ISBN (Elektronik)	9798350316834
DOI'lar	https://doi.org/10.1109/UPEC57427.2023.10294903
Yayın durumu	Yayınlandı - 2023
Etkinlik	58th International Universities Power Engineering Conference, UPEC 2023 - Dublin, Ireland Süre: 30 Ağu 2023 → 1 Eyl 2023

Yayın serisi

Adı	58th International Universities Power Engineering Conference, UPEC 2023

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	58th International Universities Power Engineering Conference, UPEC 2023
Ülke/Bölge	Ireland
Şehir	Dublin
Periyot	30/08/23 → 1/09/23

Bibliyografik not

Publisher Copyright:
© 2023 IEEE.

Finansman

The work of researchers from Istanbul Technical University and Bahcesehir University was supported by the Scientific and Technological Research Council of Turkey (TUBITAK-1001, Project No:121E194). ACKNOWLEDGMENT The work of the researchers from Istanbul Technical University and Bahcesehir University was supported by the Scientific and Technological Research Council of Turkey (TUBITAK-1001, Project No: 121E194).

Finansörler	Finansör numarası
Türkiye Bilimsel ve Teknolojik Araştırma Kurumu	:121E194, TUBITAK-1001
Istanbul Teknik Üniversitesi
Bahçeşehir Üniversitesi

Belgeye Erişim

10.1109/UPEC57427.2023.10294903

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Ozdemir, I., Uckol, H. I., Aydogan, A., Soykan, G., Ghunem, R. A., & Ilhan, S. (2023). Evaluation of Surface Properties of Zinc Borate Filled HTV Silicone Rubber. In 58th International Universities Power Engineering Conference, UPEC 2023 (58th International Universities Power Engineering Conference, UPEC 2023). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/UPEC57427.2023.10294903

@inproceedings{8b5feea772a7411aa98dee0f28cf31fe,

title = "Evaluation of Surface Properties of Zinc Borate Filled HTV Silicone Rubber",

abstract = "This study presents an investigation of the surface properties of high-temperature vulcanizing (HTV) silicone rubber samples filled with different percentages (5\%, 10\%, 15\%, 20\%, and 30\%) of Zinc Borate (ZB) filler. Base HTV samples were the reference for the comparison. Physical analyses, including density and hardness measurements, were conducted on each sample. Moreover, dynamic drop tests (DDTs), contact angle measurements, surface roughness analysis, and scanning electron microscopy (SEM) imaging were performed to investigate the hydrophobicity characteristics of the samples. The results of these analyses indicated that an increase in the ZB filler ratio to 10 wt\% resulted in a notable reduction in surface roughness, which also led to a notable increase in the surface contact angle. The DDTs revealed that an increase in the ZB filler content by 30 wt\% led to an improvement in hydrophobicity performance.",

keywords = "HTV silicone rubber, contact angle, dynamic drop test, hydrophobicity, surface roughness, zinc borate",

author = "Idris Ozdemir and Uckol, \{Halil Ibrahim\} and Abdullah Aydogan and Gurkan Soykan and Ghunem, \{Refat A.\} and Suat Ilhan",

note = "Publisher Copyright: {\textcopyright} 2023 IEEE.; 58th International Universities Power Engineering Conference, UPEC 2023 ; Conference date: 30-08-2023 Through 01-09-2023",

year = "2023",

doi = "10.1109/UPEC57427.2023.10294903",

language = "English",

series = "58th International Universities Power Engineering Conference, UPEC 2023",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "58th International Universities Power Engineering Conference, UPEC 2023",

address = "United States",

}

Ozdemir, I, Uckol, HI, Aydogan, A, Soykan, G, Ghunem, RA & Ilhan, S 2023, Evaluation of Surface Properties of Zinc Borate Filled HTV Silicone Rubber. in 58th International Universities Power Engineering Conference, UPEC 2023. 58th International Universities Power Engineering Conference, UPEC 2023, Institute of Electrical and Electronics Engineers Inc., 58th International Universities Power Engineering Conference, UPEC 2023, Dublin, Ireland, 30/08/23. https://doi.org/10.1109/UPEC57427.2023.10294903

Evaluation of Surface Properties of Zinc Borate Filled HTV Silicone Rubber. / Ozdemir, Idris; Uckol, Halil Ibrahim; Aydogan, Abdullah et al.
58th International Universities Power Engineering Conference, UPEC 2023. Institute of Electrical and Electronics Engineers Inc., 2023. (58th International Universities Power Engineering Conference, UPEC 2023).

Araştırma çıktısı: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › Hakem

TY - GEN

T1 - Evaluation of Surface Properties of Zinc Borate Filled HTV Silicone Rubber

AU - Ozdemir, Idris

AU - Uckol, Halil Ibrahim

AU - Aydogan, Abdullah

AU - Soykan, Gurkan

AU - Ghunem, Refat A.

AU - Ilhan, Suat

PY - 2023

Y1 - 2023

N2 - This study presents an investigation of the surface properties of high-temperature vulcanizing (HTV) silicone rubber samples filled with different percentages (5%, 10%, 15%, 20%, and 30%) of Zinc Borate (ZB) filler. Base HTV samples were the reference for the comparison. Physical analyses, including density and hardness measurements, were conducted on each sample. Moreover, dynamic drop tests (DDTs), contact angle measurements, surface roughness analysis, and scanning electron microscopy (SEM) imaging were performed to investigate the hydrophobicity characteristics of the samples. The results of these analyses indicated that an increase in the ZB filler ratio to 10 wt% resulted in a notable reduction in surface roughness, which also led to a notable increase in the surface contact angle. The DDTs revealed that an increase in the ZB filler content by 30 wt% led to an improvement in hydrophobicity performance.

AB - This study presents an investigation of the surface properties of high-temperature vulcanizing (HTV) silicone rubber samples filled with different percentages (5%, 10%, 15%, 20%, and 30%) of Zinc Borate (ZB) filler. Base HTV samples were the reference for the comparison. Physical analyses, including density and hardness measurements, were conducted on each sample. Moreover, dynamic drop tests (DDTs), contact angle measurements, surface roughness analysis, and scanning electron microscopy (SEM) imaging were performed to investigate the hydrophobicity characteristics of the samples. The results of these analyses indicated that an increase in the ZB filler ratio to 10 wt% resulted in a notable reduction in surface roughness, which also led to a notable increase in the surface contact angle. The DDTs revealed that an increase in the ZB filler content by 30 wt% led to an improvement in hydrophobicity performance.

KW - HTV silicone rubber

KW - contact angle

KW - dynamic drop test

KW - hydrophobicity

KW - surface roughness

KW - zinc borate

UR - https://www.scopus.com/pages/publications/85178088978

U2 - 10.1109/UPEC57427.2023.10294903

DO - 10.1109/UPEC57427.2023.10294903

M3 - Conference contribution

AN - SCOPUS:85178088978

T3 - 58th International Universities Power Engineering Conference, UPEC 2023

BT - 58th International Universities Power Engineering Conference, UPEC 2023

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 58th International Universities Power Engineering Conference, UPEC 2023

Y2 - 30 August 2023 through 1 September 2023

ER -

Ozdemir I, Uckol HI, Aydogan A, Soykan G, Ghunem RA, Ilhan S. Evaluation of Surface Properties of Zinc Borate Filled HTV Silicone Rubber. In 58th International Universities Power Engineering Conference, UPEC 2023. Institute of Electrical and Electronics Engineers Inc. 2023. (58th International Universities Power Engineering Conference, UPEC 2023). doi: 10.1109/UPEC57427.2023.10294903

Evaluation of Surface Properties of Zinc Borate Filled HTV Silicone Rubber

Özet

Yayın serisi

???event.eventtypes.event.conference???

Bibliyografik not

Finansman

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap