Estimating volume fractions of microstructural constituents in austempered high silicon alloyed GJS 600-10 ductile iron through magnetic measurements (VSM)

Yakup Yurekturk, Murat Baydogan*

*Bu çalışma için yazışmadan sorumlu yazar

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde BölümKonferans katkısıbilirkişi

1 Atıf (Scopus)

Özet

In this paper, austempering heat treatment was applied to a new generation high silicon GJS 600-10 grade ductile iron with an initial ferritic matrix. Different austempering temperatures of 270, 330 and 390°C were applied after austenitizing at 975°C for 120 min. Depending on the austempering temperatures, lower and upper ausferritic microstructures were obtained. Results showed that volume fraction of the retained austenite in the ausferritic microstructures, which was estimated by VSM technique is well correlated with those estimated by XRD technique.

Orijinal dilİngilizce
Ana bilgisayar yayını başlığıAdvanced Technologies of Materials Processing II - 10th BraMat 2017
EditörlerDaniel Munteanu, Mircea Horia Tierean
YayınlayanTrans Tech Publications Ltd
Sayfalar50-55
Sayfa sayısı6
ISBN (Basılı)9783035710755
DOI'lar
Yayın durumuYayınlandı - 2017
Etkinlik10th International Conference on Materials Science and Engineering, BraMat 2017 - Brasov, Romania
Süre: 8 Mar 201711 Mar 2017

Yayın serisi

AdıMaterials Science Forum
Hacim907 MSF
ISSN (Basılı)0255-5476
ISSN (Elektronik)1662-9752

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???10th International Conference on Materials Science and Engineering, BraMat 2017
Ülke/BölgeRomania
ŞehirBrasov
Periyot8/03/1711/03/17

Bibliyografik not

Publisher Copyright:
© 2017 Trans Tech Publications, Switzerland

Parmak izi

Estimating volume fractions of microstructural constituents in austempered high silicon alloyed GJS 600-10 ductile iron through magnetic measurements (VSM)' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

Alıntı Yap