Environmental sensitivity of printed circuit board manufacturing to Cu recycling rate, transportation and various energy sources

Elif Ozkan; Bilge Bas; Nilay Elginoz; Fatos Germirli Babuna

doi:10.1504/IJGW.2020.106596

Environmental sensitivity of printed circuit board manufacturing to Cu recycling rate, transportation and various energy sources

Elif Ozkan, Bilge Bas, Nilay Elginoz, Fatos Germirli Babuna^*

^*Bu çalışma için yazışmadan sorumlu yazar

Çevre Mühendisliği Bölümü

Araştırma sonucu: Dergiye katkı › Makale › bilirkişi

4 Atıf (Scopus)

Özet

This study concentrates on environmental impacts of PCB manufacturing. The objective is to examine the effect of Cu recycling rate, transportation, energy sources and end-of-life (EoL) on global warming potential (GWP), marine aquatic ecotoxicity potential (MAEP), terrestric ecotoxicity potential (TETP), freshwater aquatic ecotoxicity potential (FAETP), human toxicity potential (HTP), ozone layer depletion (ODP), photochemical ozone creation potential (POCP), eutrophication potential (EP), acidification potential (AP) and abiotic depletion potential (ADP fossil, ADP elements) potentials. Increasing Cu recycling rate from 30% to 47%, reduce the impacts by 10 to 103%. The most significant reduction is for HTP. Transportation elevates AP and POCP by 29%, ADP fossil by 23% and GWP by 21%. Obtaining energy from renewable sources causes 56, 40 and 39% reductions in HTP, ADP fossil and GWP, namely. Apart from GWP where PCB manufacturing and EoL has equal impacts, for the other categories PCB manufacturing has more than 75% contribution.

Orijinal dil	İngilizce
Sayfa (başlangıç-bitiş)	237-248
Sayfa sayısı	12
Dergi	International Journal of Global Warming
Hacim	20
Basın numarası	3
DOI'lar	https://doi.org/10.1504/IJGW.2020.106596
Yayın durumu	Yayınlandı - 2020

Bibliyografik not

Publisher Copyright:
Copyright © 2020 Inderscience Enterprises Ltd.

Finansman

Fatos Germirli Babuna has 35 years experience in the field of Environmental Engineering. She received her BSc in Chemical Engineering (Bogazici University), MSc and PhD in Environmental Engineering (Istanbul Technical University. From 1990 to 1992, she was a Postdoctoral Researcher at ENEA, Bologna, Italy, by the grant received from the Italian Government. Between 2002–2004, she was the Chair of ITU Environmental Engineering Department. In 1999, she received an incentive award in engineering branch from the Scientific and Technical Research Council of Turkey (TUBITAK). She has published an international book and over 90 scientific papers and received more than 1,400 citations.

Finansörler	Finansör numarası
Italian Government
European Neuroendocrine Association

BM SKH

Bu sonuç, aşağıdaki Sürdürülebilir Kalkınma Hedefine/Hedeflerine katkıda bulunur

Belgeye Erişim

10.1504/IJGW.2020.106596

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

@article{d49191a2caf440deb997364f9f338462,

title = "Environmental sensitivity of printed circuit board manufacturing to Cu recycling rate, transportation and various energy sources",

abstract = "This study concentrates on environmental impacts of PCB manufacturing. The objective is to examine the effect of Cu recycling rate, transportation, energy sources and end-of-life (EoL) on global warming potential (GWP), marine aquatic ecotoxicity potential (MAEP), terrestric ecotoxicity potential (TETP), freshwater aquatic ecotoxicity potential (FAETP), human toxicity potential (HTP), ozone layer depletion (ODP), photochemical ozone creation potential (POCP), eutrophication potential (EP), acidification potential (AP) and abiotic depletion potential (ADP fossil, ADP elements) potentials. Increasing Cu recycling rate from 30% to 47%, reduce the impacts by 10 to 103%. The most significant reduction is for HTP. Transportation elevates AP and POCP by 29%, ADP fossil by 23% and GWP by 21%. Obtaining energy from renewable sources causes 56, 40 and 39% reductions in HTP, ADP fossil and GWP, namely. Apart from GWP where PCB manufacturing and EoL has equal impacts, for the other categories PCB manufacturing has more than 75% contribution.",

keywords = "Cu recycling, Electronics industry, Energy source, Life cycle assessment, Manufacturing, PCB, Printed circuit board, Transportation",

author = "Elif Ozkan and Bilge Bas and Nilay Elginoz and Babuna, {Fatos Germirli}",

note = "Publisher Copyright: Copyright {\textcopyright} 2020 Inderscience Enterprises Ltd.",

year = "2020",

doi = "10.1504/IJGW.2020.106596",

language = "English",

volume = "20",

pages = "237--248",

journal = "International Journal of Global Warming",

issn = "1758-2083",

publisher = "Inderscience",

number = "3",

}

TY - JOUR

T1 - Environmental sensitivity of printed circuit board manufacturing to Cu recycling rate, transportation and various energy sources

AU - Ozkan, Elif

AU - Bas, Bilge

AU - Elginoz, Nilay

AU - Babuna, Fatos Germirli

PY - 2020

Y1 - 2020

N2 - This study concentrates on environmental impacts of PCB manufacturing. The objective is to examine the effect of Cu recycling rate, transportation, energy sources and end-of-life (EoL) on global warming potential (GWP), marine aquatic ecotoxicity potential (MAEP), terrestric ecotoxicity potential (TETP), freshwater aquatic ecotoxicity potential (FAETP), human toxicity potential (HTP), ozone layer depletion (ODP), photochemical ozone creation potential (POCP), eutrophication potential (EP), acidification potential (AP) and abiotic depletion potential (ADP fossil, ADP elements) potentials. Increasing Cu recycling rate from 30% to 47%, reduce the impacts by 10 to 103%. The most significant reduction is for HTP. Transportation elevates AP and POCP by 29%, ADP fossil by 23% and GWP by 21%. Obtaining energy from renewable sources causes 56, 40 and 39% reductions in HTP, ADP fossil and GWP, namely. Apart from GWP where PCB manufacturing and EoL has equal impacts, for the other categories PCB manufacturing has more than 75% contribution.

AB - This study concentrates on environmental impacts of PCB manufacturing. The objective is to examine the effect of Cu recycling rate, transportation, energy sources and end-of-life (EoL) on global warming potential (GWP), marine aquatic ecotoxicity potential (MAEP), terrestric ecotoxicity potential (TETP), freshwater aquatic ecotoxicity potential (FAETP), human toxicity potential (HTP), ozone layer depletion (ODP), photochemical ozone creation potential (POCP), eutrophication potential (EP), acidification potential (AP) and abiotic depletion potential (ADP fossil, ADP elements) potentials. Increasing Cu recycling rate from 30% to 47%, reduce the impacts by 10 to 103%. The most significant reduction is for HTP. Transportation elevates AP and POCP by 29%, ADP fossil by 23% and GWP by 21%. Obtaining energy from renewable sources causes 56, 40 and 39% reductions in HTP, ADP fossil and GWP, namely. Apart from GWP where PCB manufacturing and EoL has equal impacts, for the other categories PCB manufacturing has more than 75% contribution.

KW - Cu recycling

KW - Electronics industry

KW - Energy source

KW - Life cycle assessment

KW - Manufacturing

KW - PCB

KW - Printed circuit board

KW - Transportation

UR - http://www.scopus.com/inward/record.url?scp=85083901125&partnerID=8YFLogxK

U2 - 10.1504/IJGW.2020.106596

DO - 10.1504/IJGW.2020.106596

M3 - Article

AN - SCOPUS:85083901125

SN - 1758-2083

VL - 20

SP - 237

EP - 248

JO - International Journal of Global Warming

JF - International Journal of Global Warming

IS - 3

ER -

Environmental sensitivity of printed circuit board manufacturing to Cu recycling rate, transportation and various energy sources

Özet

Bibliyografik not

Finansman

BM SKH

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap