Elasto-plastic load transfer in bulk metallic glass composites containing ductile particles

Dorian K. Balch, Ersan Üstündag, David C. Dunand*

*Bu çalışma için yazışmadan sorumlu yazar

Araştırma sonucu: ???type-name???Makalebilirkişi

31 Atıf (Scopus)

Özet

In-situ diffraction experiments were performed with high-energy synchrontron X-rays to measure strains in crystalline reinforcing particles (5 and 10 vol. pct W or 5 vol. pct Ta) of bulk metallic glass composites. As the composites were subjected to multiple uniaxial tensile load/unload cycles up to applied stresses of 1650 MPa, load transfer from the matrix to the stiffer particles was observed. At low applied loads, where the particles are elastic, agreement with Eshelby elastic predictions for stress partitioning between matrix and particles is found, indicating good bonding between the phases. At high applied loads, departure from the elastic stress partitioning is observed when the particles reach the von Mises yield criterion, as expected when plasticity occurs in the particles. Multiple mechanical excursions in the particle plastic region lead to strain hardening in the particles, as well as evolution in the residual strain state of the unloaded composite.

Orijinal dilİngilizce
Sayfa (başlangıç-bitiş)1787-1797
Sayfa sayısı11
DergiMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
Hacim34 A
Basın numarası9
DOI'lar
Yayın durumuYayınlandı - Eyl 2003
Harici olarak yayınlandıEvet

Parmak izi

Elasto-plastic load transfer in bulk metallic glass composites containing ductile particles' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

Alıntı Yap