Özet
The increased use of the direct current components and power electronic equipment's increase the significance of harmonics in the power system. In the power system, the transformer is one of the important equipment. Non-sinusoidal voltage source leads to higher losses and decreases the life of the transformer. In this study, the three-dimensional finite element method was used to examine four different conditions for the evolution of the no-load losses of the transformer. During the first condition, no-load losses were examined for the normal conditions i.e. without any harmonics. The finite element analysis result of the normal condition is also compared with the experimental and analytical results. For condition II, III and IV, harmonic voltages were added to the primary voltage. The main aim of this study is to analyze the effect of the different harmonic orders and magnitudes on the no-load losses. This study will help the transformer designers, to evaluate the effect of the different harmonics on the no-load losses.
Orijinal dil | İngilizce |
---|---|
Ana bilgisayar yayını başlığı | 2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021 |
Yayınlayan | Institute of Electrical and Electronics Engineers Inc. |
Sayfalar | 388-392 |
Sayfa sayısı | 5 |
ISBN (Elektronik) | 9786050114379 |
DOI'lar | |
Yayın durumu | Yayınlandı - 2021 |
Etkinlik | 13th International Conference on Electrical and Electronics Engineering, ELECO 2021 - Virtual, Bursa, Turkey Süre: 25 Kas 2021 → 27 Kas 2021 |
Yayın serisi
Adı | 2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021 |
---|
???event.eventtypes.event.conference???
???event.eventtypes.event.conference??? | 13th International Conference on Electrical and Electronics Engineering, ELECO 2021 |
---|---|
Ülke/Bölge | Turkey |
Şehir | Virtual, Bursa |
Periyot | 25/11/21 → 27/11/21 |
Bibliyografik not
Publisher Copyright:© 2021 Chamber of Turkish Electrical Engineers.
Finansman
The authors gratefully acknowledge the financial support of the Istanbul Technical University Bilimsel Araştırma Projeleri under project number MGA-2020-42527, and TUBİTAK and under project number 118C109. The authors gratefully acknowledge the financial support of the Istanbul Technical University Bilimsel Arastirma Projeleri under project number MGA-2020-42527, and TUBITAK and under project number 118C109.
Finansörler | Finansör numarası |
---|---|
Istanbul Technical University Bilimsel Arastirma Projeleri | |
Istanbul Technical University Bilimsel Araştırma Projeleri | MGA-2020-42527 |
TUBITAK | |
TUBİTAK | 118C109 |