Effects of optical design modifications on thermal performance of a highly reflective HfO2/SiO2/TiO2 three material coating

M. Ocak, C. Sert*, T. Okutucu-Özyurt

*Bu çalışma için yazışmadan sorumlu yazar

Araştırma sonucu: Dergiye katkıMakalebilirkişi

Özet

Effects of layer thickness modifications on laser induced temperature distribution inside three material, highly reflective thin film coatings are studied with numerical simulations. As a base design, a 21 layer coating composed of HfO2, SiO2 and TiO2 layers of quarter wave thickness is considered. First, the laser induced temperature distribution in this base design is obtained. Then the layer thicknesses of the base design are modified and the corresponding temperature distributions in four alternative non-quarter wave coatings are evaluated. The modified thicknesses are determined using an in-house code developed to shift the electric field intensity (EFI) peak from the first high/low layer interface towards the adjacent low index layer that has a higher thermal conductivity, hence, higher laser damage resistance. Meanwhile, the induced increase in the EFI peak is kept at a user defined upper limit. The laser endurance of the base and alternative designs are compared in terms of their estimated temperature distributions. The results indicated that both the peak temperature and the highest interface temperature are decreased by at least 32%, in non-dimensional form, when alternative designs are used instead of the base design. The total reflection of the base design is only decreased from 99.8% to at most 99.4% when alternative designs are used. The study is proved to be successful in improving the laser endurance of three material thin film coatings by lowering the peak and interface temperatures.

Orijinal dilİngilizce
Sayfa (başlangıç-bitiş)377-384
Sayfa sayısı8
DergiHeat and Mass Transfer
Hacim54
Basın numarası2
DOI'lar
Yayın durumuYayınlandı - 1 Şub 2018
Harici olarak yayınlandıEvet

Bibliyografik not

Publisher Copyright:
© 2017, Springer-Verlag GmbH Germany.

Parmak izi

Effects of optical design modifications on thermal performance of a highly reflective HfO2/SiO2/TiO2 three material coating' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

Alıntı Yap