Effects of milling parameters on the microstructural and thermal properties of nanocrystalline lanthanum hexaboride powders

Duygu Ağaoğulları*, Özge Balcı, M. Lütfi Öveçoğlu, İsmail Duman

*Bu çalışma için yazışmadan sorumlu yazar

Araştırma sonucu: Dergiye katkıMakalebilirkişi

4 Atıf (Scopus)

Özet

This study reports the effects of some milling parameters (duration, ball-to-powder weight ratio (BPR), process control agent (PCA)) on the fabrication of nanocrystalline LaB6 powders via a combined process of mechanochemical synthesis (MCS) and acid leaching, starting from La2O3-B2O3-Mg powder blends. MCS was carried out in a high-energy ball mill (SPEX™ 8000D Mixer/Mill, at 1200 rpm) using hardened steel vial and balls under Ar atmosphere. As-synthesized products were leached out with 4 M HCl from unwanted MgO phase and probable Fe impurities. When a BPR of 18:1 was used, 5 h of MCS and leaching yielded LaB6 powders with an average particle size of 100 nm, containing a very small amount of FeB49 phase. Pure LaB6 powders were obtained with an average particle size of 53 nm after 12 h of MCS of the 0.5 wt% PCA added La2O3-B2O3-Mg powder blends with a BPR of 10:1 and after leaching.

Orijinal dilİngilizce
Sayfa (başlangıç-bitiş)177-190
Sayfa sayısı14
DergiJournal of the Australian Ceramic Society
Hacim54
Basın numarası1
DOI'lar
Yayın durumuYayınlandı - 1 Mar 2018

Bibliyografik not

Publisher Copyright:
© 2017, Australian Ceramic Society.

Parmak izi

Effects of milling parameters on the microstructural and thermal properties of nanocrystalline lanthanum hexaboride powders' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

Alıntı Yap