Effect of printing parameters on impact energy absorption of additively manufactured hierarchical structures

Alaeddin Burak Irez*, Merve Bilgen Bagci

*Bu çalışma için yazışmadan sorumlu yazar

Araştırma sonucu: ???type-name???Makalebilirkişi


Purpose: This study aims to examine how the thickness of layers and printing speed impact the energy absorption capacity of honeycomb structures through drop-weight experiments. In addition, the effect of printing orientation on the resulting microstructure and mechanical performance was targeted to be examined. Design/methodology/approach: In this paper, after manufacturing test specimens using fused deposition modeling technique with three distinct layer thicknesses (0.16 mm, 0.20 mm and 0.28 mm) and printing speeds (40 mm/min, 50 mm/min and 70 mm/min), drop weight tests were carried out. Then to see the effect of printing orientation on mechanical performance, three-point-bending tests were performed and damage mechanisms were comparatively examined through scanning electron microscopy. Findings: An increase in layer thickness from 0.16 mm to 0.28 mm resulted in a notable 37% decrease in the impact resistance of the printed part. In addition, increasing the printing speed from 50 to 70 mm/min reduced the energy absorption capacity of the printed part by approximately 36.5%. Moreover, in terms of printing direction, transversely printed specimens showed 10% lower flexural strength than longitudinally printed specimens. Finally, scanning electron microscopy (SEM) observation showed that internal defects were more prominent in transversely printed specimens, resulting in premature failure. Furthermore, delamination was also detected in transversely printed specimens as another damage mechanism accelerating material failure. Originality/value: It is seen that the effect of printing parameters on the fundamental mechanical properties including tensile strength, strain at break, ductility and elastic modulus were studied by various researchers. However, to the best of authors’ knowledge, the effect of printing speed and layer thickness on the energy absorption of polylactic acid based hexagonal honeycomb was not encountered. In addition, in-depth SEM analysis to discover the influence of printing direction significantly contributes to the literature.

Orijinal dilİngilizce
DergiRapid Prototyping Journal
Yayın durumuKabul Edilmiş/Basında - 2024

Bibliyografik not

Publisher Copyright:
© 2024, Emerald Publishing Limited.

Parmak izi

Effect of printing parameters on impact energy absorption of additively manufactured hierarchical structures' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

Alıntı Yap