Discussion on the manuscript entitled “Thermal residual stress in a functionally graded material system” by K. S. Ravichandran, Materials Science and Engineering A, 201(1–2), pp. 269-276

Tugba Baytak, Ismail Topcu, Osman Bulut*

*Bu çalışma için yazışmadan sorumlu yazar

Araştırma sonucu: ???type-name???Makalebilirkişi

Özet

In the article entitled “Thermal residual stress in a functionally graded material system”, a strip element made of a combination of Al2O3 ceramic and Ni metal was considered as a functionally graded material to obtain the general expressions for thermal residual stresses. The results showed that the stress distribution changes continuously as the volume fraction of the ceramic varies according to a power function. However, an incorrect term for bending stiffness was used in this expression. In addition, the expression for the residual stress term, which is resulted from the uniform elongation of the strip fibers, should not be used to calculate the reactive bending moment. It must be obtained from the nonuniform distribution of thermal strain across the thickness. In this study, the derivation of the final expression for the thermal residual stress in a functionally graded strip element by the strain suppression method is discussed.

Orijinal dilİngilizce
Makale numarası142842
DergiMaterials Science and Engineering: A
Hacim839
DOI'lar
Yayın durumuYayınlandı - 6 Nis 2022

Bibliyografik not

Publisher Copyright:
© 2022 Elsevier B.V.

Finansman

The authors would like to thank to Experimental Mechanics Laboratory in Istanbul Technical University.

FinansörlerFinansör numarası
Istanbul Teknik Üniversitesi

    Parmak izi

    Discussion on the manuscript entitled “Thermal residual stress in a functionally graded material system” by K. S. Ravichandran, Materials Science and Engineering A, 201(1–2), pp. 269-276' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

    Alıntı Yap