Determination of Pb in glasses by direct solid sampling and high-resolution continuum source graphite furnace atomic absorption spectrometry: Method development and analyses of glass samples

Seda Kelestemur, Mustafa Özcan*

*Bu çalışma için yazışmadan sorumlu yazar

Araştırma sonucu: ???type-name???Makalebilirkişi

19 Atıf (Scopus)

Özet

In this study, a new method was developed for the determination of Pb in glass samples by solid sampling graphite furnace atomic absorption spectrometry (SS GFAAS), and Pb concentrations of two glass samples were determined. For method development, the National Institute of Standards and Technology (NIST) SRM 612 glass standard was used. Different experimental and instrumental parameters were investigated, including sample mass introduced into the graphite furnace, use of a modifier, use of an aqueous standard solution for calibration curves, and different detection wavelengths. Pd(NO3)2+Mg(NO3)2 was used as a modifier for experiments. LOD values were 201.6pg Pb at 205.328nm with 3pixels (central pixel±1) and 11.2pg Pb at 283.060nm with 3pixels (central pixel±1). Then, Pb concentrations in two different glass samples were determined by SS GFAAS using aqueous Pb standard and solid standard (NIST SRM 612) for calibration. Thus, the study shows that SS GFAAS is a reliable method for the determination of Pb in glass samples with the advantageous using very small amount (30-100μg) of glass sample and no need to dissolve the glass by toxic and hazardous chemicals.

Orijinal dilİngilizce
Sayfa (başlangıç-bitiş)55-61
Sayfa sayısı7
DergiMicrochemical Journal
Hacim118
DOI'lar
Yayın durumuYayınlandı - Oca 2015

Parmak izi

Determination of Pb in glasses by direct solid sampling and high-resolution continuum source graphite furnace atomic absorption spectrometry: Method development and analyses of glass samples' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

Alıntı Yap