Design of high frequency buck converter for DC Motor Control

L. Xheladini; A. Polat; L. T. Ergene

doi:10.1109/OPTIM.2015.7426961

Design of high frequency buck converter for DC Motor Control

L. Xheladini
, A. Polat
, L. T. Ergene

Elektrik Mühendisliği Bölümü

Istanbul Technical University

Araştırma çıktısı: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › Hakem

1 Atıf (Scopus)

Özet

In this project, following a brief historical view on the control methods of DC motors and the first high power semiconductor devices, the mathematical models of different DC motors and buck converter are derived first. Using these equations, a high frequency buck converter is designed according to the model of the DC motor used in the experimental section. After that, using the designed converter, characteristics of shunt and series DC motors are derived for several operating conditions. The characteristics of the DC motors are followed by the influence of the load change to the output voltage of the converter and its efficiency change as the load is increased.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	Joint International Conference - ACEMP 2015
Ana bilgisayar yayını alt yazısı	Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems
Editörler	H. Bulent Ertan
Yayınlayan	Institute of Electrical and Electronics Engineers Inc.
Sayfalar	768-773
Sayfa sayısı	6
ISBN (Elektronik)	9781467372398
DOI'lar	https://doi.org/10.1109/OPTIM.2015.7426961
Yayın durumu	Yayınlandı - 7 Mar 2016
Etkinlik	1st Joint International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2015, International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2015 and International Symposium on Advanced Electromechanical Motion Systems, ELECTROMOTION 2015 - Side, Türkiye Süre: 2 Eyl 2015 → 4 Eyl 2015

Yayın serisi

Adı	Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	1st Joint International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2015, International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2015 and International Symposium on Advanced Electromechanical Motion Systems, ELECTROMOTION 2015
Ülke/Bölge	Türkiye
Şehir	Side
Periyot	2/09/15 → 4/09/15

Bibliyografik not

Publisher Copyright:
© 2015 IEEE.

BM SKH

Bu sonuç, aşağıdaki Sürdürülebilir Kalkınma Hedefine/Hedeflerine katkıda bulunur

SKH 7 Erişilebilir ve Temiz Enerji

Belgeye Erişim

10.1109/OPTIM.2015.7426961

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Xheladini, L., Polat, A., & Ergene, L. T. (2016). Design of high frequency buck converter for DC Motor Control. In H. B. Ertan (Ed.), Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems (pp. 768-773). Makale 7426961 (Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/OPTIM.2015.7426961

Xheladini, L. ; Polat, A. ; Ergene, L. T. / Design of high frequency buck converter for DC Motor Control. Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems. editör / H. Bulent Ertan. Institute of Electrical and Electronics Engineers Inc., 2016. pp. 768-773 (Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems).

@inproceedings{5f2f1fe02e364fc79da30d718ee9e7ee,

title = "Design of high frequency buck converter for DC Motor Control",

abstract = "In this project, following a brief historical view on the control methods of DC motors and the first high power semiconductor devices, the mathematical models of different DC motors and buck converter are derived first. Using these equations, a high frequency buck converter is designed according to the model of the DC motor used in the experimental section. After that, using the designed converter, characteristics of shunt and series DC motors are derived for several operating conditions. The characteristics of the DC motors are followed by the influence of the load change to the output voltage of the converter and its efficiency change as the load is increased.",

keywords = "buck converter, efficiency, Series/Shunt DC Motor, speed, torque",

author = "L. Xheladini and A. Polat and Ergene, \{L. T.\}",

note = "Publisher Copyright: {\textcopyright} 2015 IEEE.; 1st Joint International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2015, International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2015 and International Symposium on Advanced Electromechanical Motion Systems, ELECTROMOTION 2015 ; Conference date: 02-09-2015 Through 04-09-2015",

year = "2016",

month = mar,

day = "7",

doi = "10.1109/OPTIM.2015.7426961",

language = "English",

series = "Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "768--773",

editor = "Ertan, \{H. Bulent\}",

booktitle = "Joint International Conference - ACEMP 2015",

address = "United States",

}

Xheladini, L, Polat, A & Ergene, LT 2016, Design of high frequency buck converter for DC Motor Control. in HB Ertan (ed.), Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems., 7426961, Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems, Institute of Electrical and Electronics Engineers Inc., pp. 768-773, 1st Joint International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2015, International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2015 and International Symposium on Advanced Electromechanical Motion Systems, ELECTROMOTION 2015, Side, Türkiye, 2/09/15. https://doi.org/10.1109/OPTIM.2015.7426961

Design of high frequency buck converter for DC Motor Control. / Xheladini, L.; Polat, A.; Ergene, L. T.
Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems. ed. / H. Bulent Ertan. Institute of Electrical and Electronics Engineers Inc., 2016. p. 768-773 7426961 (Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems).

Araştırma çıktısı: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › Hakem

TY - GEN

T1 - Design of high frequency buck converter for DC Motor Control

AU - Xheladini, L.

AU - Polat, A.

AU - Ergene, L. T.

PY - 2016/3/7

Y1 - 2016/3/7

N2 - In this project, following a brief historical view on the control methods of DC motors and the first high power semiconductor devices, the mathematical models of different DC motors and buck converter are derived first. Using these equations, a high frequency buck converter is designed according to the model of the DC motor used in the experimental section. After that, using the designed converter, characteristics of shunt and series DC motors are derived for several operating conditions. The characteristics of the DC motors are followed by the influence of the load change to the output voltage of the converter and its efficiency change as the load is increased.

AB - In this project, following a brief historical view on the control methods of DC motors and the first high power semiconductor devices, the mathematical models of different DC motors and buck converter are derived first. Using these equations, a high frequency buck converter is designed according to the model of the DC motor used in the experimental section. After that, using the designed converter, characteristics of shunt and series DC motors are derived for several operating conditions. The characteristics of the DC motors are followed by the influence of the load change to the output voltage of the converter and its efficiency change as the load is increased.

KW - buck converter

KW - efficiency

KW - Series/Shunt DC Motor

KW - speed

KW - torque

UR - https://www.scopus.com/pages/publications/84964937546

U2 - 10.1109/OPTIM.2015.7426961

DO - 10.1109/OPTIM.2015.7426961

M3 - Conference contribution

AN - SCOPUS:84964937546

T3 - Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems

SP - 768

EP - 773

BT - Joint International Conference - ACEMP 2015

A2 - Ertan, H. Bulent

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 1st Joint International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2015, International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2015 and International Symposium on Advanced Electromechanical Motion Systems, ELECTROMOTION 2015

Y2 - 2 September 2015 through 4 September 2015

ER -

Xheladini L, Polat A, Ergene LT. Design of high frequency buck converter for DC Motor Control. In Ertan HB, editör, Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems. Institute of Electrical and Electronics Engineers Inc. 2016. p. 768-773. 7426961. (Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems). doi: 10.1109/OPTIM.2015.7426961

Design of high frequency buck converter for DC Motor Control

Özet

Yayın serisi

???event.eventtypes.event.conference???

Bibliyografik not

BM SKH

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap